My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

Right-click on the header at the top of the list of messages and select from the list of options.

Tags: Thunderbird

Similar Questions

  • I updated the firmware of my as30v and now it does not work

    It's my problem.
    In my computer, the update was completed suceffully, but then my actioncam it does not work.
    I removed the battery and nothing to do.
    The screen is off and the rec light still works.
    No information on the screen, no response. I tried to remove the time of one and an another battery. The red light is still in mode on. If I connect with the computer, nothing happened.

    Died?, but why!

    Your device is in integrated security mode / download.

    Go through the process of updating the firmware again. What operating system do you use?

    Repeat and follow this guide:

    http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=HDRAS30V&upd_id=9893&os_group_id=23

  • The brand a three E63 and now Skype does not work...

    I bought an E63 on eBay, downloaded Skype and everything was fine.

    I decided to disable the brand phone and reinstalled Skype.

    I was greeted with a message saying that Skype was not available on my phone.

    What has gone wrong?

    The old firmware was in the 200, and the current is in the 500.

    Can we expect more support for Symbian or will it be abandoned (like Nokia) for Windows?

    Thanks for any help.

    Sorted.

    Click on the link for the no touch Nokias on this page...

    aitchteeteepeecolon//blogs.Skype.com/garage/2010/12/skype_15_for_symbian.html

  • After VO extension update the page for some fields on a page does not work

    After VO extension update the page for some fields on a page does not work. The message arrives the data are saved, but the values is the same as that of the former. And this happens with only a few fields, other fields are working well.

    Any pointer to solve problems will be of great help.

    Thank you in advance.

    Check if the standard VO has a RowImpl and it overrides the methods getter and setter for fields that is affected. If so, you will need to call super() in your custom extended RowImpl to call this logic.

    See the link below for how to call great from the extended RowImpl.

    Johny tips: OAF: transient attributes not getting filled extended vo

    Example Code:

    public String getAttribute1() {
   //return (String) getAttributeInternal("Attribute1");
  return super.getAttribute1();
 }

    If the above did not help, attach standard and custom VO files. We can have a look.

    See you soon

    AJ

  • updated my driver for my Ethernet controller and now it does not work

    Original title:

    Network network network Ethernet device

    I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
    to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
    a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

    Hello

    You can try the following steps and check if it works:

    Method 1:

    You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

    Restore a driver with its previous version

    http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

    Method 2:

    If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

    It will be useful.

  • My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    I hope this will help:

    Error 213:19 | Problem is the license for this product

  • Download 12.5.1.21 and lots of photos of work in the tabs of the ARTIST do not show the artist, only a graphic of a microphone. I had before the artist with their photos, and now I can't. How can we get them. ?

    Before when I have to click on the 'artists', all my artist art 12.5.1 on the sidebar appears. Now most of the artists album covers appear only a chart from a microphone in light pink, blue and clear.  However, when I click on 'albums', all album covers are not displayed correctly.  Review of my library, all the artwork for each song, and the album is installed correctly.   How to get the picture of the work on the 'artists' on the sidebar tab?  How can I do to reinstall the work of artists.  Help!

    Richard

    Yours is probably the clearest explanation of the issue of iTunes with the "artists". Could you put a picture of the "artist's impression" so that we can see the problem?

    (I guess that other "views" - recently added, Albums, songs and Genres - work very well.

    Thank you!

  • Cannot get the procedure for d3dperf_setoption (d3d9.dll) - Skype address does not work

    I face this big mistake:-failed to get address of procedure for d3dperf_setoption (d3d9.dll)

    ... when I start my pc, then show this msg my Skype software does not work. installation of the software is no longer. Please solve my problem. thanking you...

    Hello jassi8,

    Often we see errors as the result of a program from loading at startup.

    To solve these, we use the clean boot troubleshooting.

    The following describes this process:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    Best regards

    Matthew_Ha

  • MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    A Beyschau of Annette

    Hello

    Quote: ' MiFi will not work unless plugged in to the computer.

    Where it has been plugged in before?

    If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

    ----------------------------

    Wi - Fi in general.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    ------------------

    The wireless card drivers much also install utility wireless of the seller.

    Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    party like Hello and NetMagic 3rd network managers can block local traffic too.

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • My Norton anti-virus software used to work and now it does not work with the new Firefox update. This corrected soon? Otherwise, I will not use the product

    Since your last update that my Norton toolbar will not work... If it does not work, will not use your product. Can it be fixed quickly?

    According to the article, I linked to before, you will need to update the norton version 2015.2.1.13 toolbar that is compatible.

  • Windows Live Photo gallery has always been on my Windows 7 and I have printed photos of the email that I downloaded. Now it does not work?

    I downloaded and photo by email to photo gallery and I now want to print it.  How to print it?

    Hello

    The question you have posted is related to Windows Live Hotmail and would be better suited to the Windows Live community. Please visit the link below to view the query in instances of Windows Live Hotmail for assistance.

    http://www.windowslivehelp.com/

    Hope this information is useful.

  • New firefox does not work, how do I get the old one back?

    To the e-mail newsletter, I downloaded the new firefox. I said Yes when asked if I wanted to replace the one that was there. Then, I discovered that my operating system will not work with the new firefox, and my old man went. How to bring back the previous version?

    -> Versions of Firefox 4 and later do not run a Mac PowerPC.

    -> Firefox 3.6.23 (Mac OS X 10.4 and later versions) can be found here:

    -> For an unofficial version Firefox 4 compatible (TenFourFox) that runs on PowerPC Mac OS X 10.4.11 or OS X 10.5.8 you can watch:

    Check and tell if its working.

  • My saved favorites does not appear on the html bar when I typed the first letter! He appeared and now it does not work! How and what do I do?

    Help! My saved favorites does not appear when I type in the first letter. For an example, I saved "www.facebook.com" as one of my favorites. Whenever I go into facebook, I'll just enter the letter 'f' and he goes, a drop down link in the html bar then I'm leaving for facebook! But recently there have not been showing bookmarks I saved. I reinstalled firefox and it does not solve the problem at all. How and what do I do?

    Make sure that the address bar is not set to 'Nothing': Tools > Options > privacy > address bar: when you use the location bar, suggest: history, bookmarks and bookmarks - see Smart Location Bar

  • OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

    Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

    ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

    "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

    The cartridges were brand new and came in the same area as the printer.

    I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

    Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

    Hi @Candykuma,

    Welcome to the HP Forums!

    I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

    Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

    If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    Good luck!

    "Please click the Thumbs up icon below to thank me for having responded."

  • I WENT TO THE PROGRAMS TO FIND M YSERVICES IF I COULD TURN ON MY SECURITY SYSTEM, BUT MY SERVICES FILE DOES NOT CONTAIN HOW DO I GET IT BACK

    MY SECURITY CENTER HAS TURNED OFF, I WENT INTO THE CONTROL PANEL TO TURN BACK BUT I COULDN'T SO I WENT

    PROGRAMS TO LOOK TO HIGH SECURITY CENTER AND IT WASN'T WHAT I DO AND HOW TO GET BACK MY SECURITY CENTER

    Hello

    Please do not post in all capitals!

    We have ro try and read it

    _______________________________________________________

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/products/malwarebytes_free

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    ______________________________________________________________

    also run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228#appliesTo

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

Maybe you are looking for