My inconia tab 100 show that the acer logo

Similar Questions

• Satellite M200 Vista shows that the HARD drive is full of 98%

  This problem showed about 2 months ago the system started running slowly and after a bit of research, I went to computer and found he showed that the HARD drive was full of 98%. Then I went and disabled the feature of shadow copy that reached about 3 Gig. After that, the performance was still hurt, so I decided to do a system restore. All reformatted once was good again until a week ago, and the same problem came back once again.

  This laptop is running Vista Home Premium SP1, 120 Gig drive HARD, Kaspersky Anti-virus, it has very limited connection to the Net, as it is mainly used to store and transfer music on an Ipod (20 GB of music).

  Any thoughts? Maybe a hardware failure?

  Thanks in advance.

  Craig.

  Hardware failure is very likely, since you are clearly able to access your hard disk without problem.
  Looks like you are using software that could be gradually fill the hard drive with data, such as a log file, it is difficult to say.
  With the erosion of the space, you might want to periodically check each folder in drive C (right click, properties) and see how it changes for each new session.

  Also clean the temporary files would help such as for:

  "c:\temp".
  "c:\windows\temp".
  "%userprofile%\Local Settings\Temp.
  erase internet files of Internet Explorer cache / temporary
  deactivation and reactivation then "System Restore" (do this only if you are satisfied with Vista is running stable)

  Richard S.

• the printer Xerox Phaser 3010 every time I do a draw it prints no and it show that the printer is paused

  help - please I have the xerox Phaser printer 3010 whenever I do a draw it does not print and it shows that the printer is paused it happened he was working? I tried to cancel and restart, troubleshooting, but nothing worked it keep suspended how change that? Help, please!

  Hello

  1. have there been recent changes to the computer before the show?

  2. the problem occurs when printing on all applications?

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems printing and printing errors.

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here.

  Original title: what I am doing wrong?

  I just reinstalled Windows XP on a blank hard drive (new).  I have installed WLAN driver disk resource. I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here. What can I do?

  Hello

  The following articles may be useful:

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095 
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I backed up the files on a DVD of a XP OS to put on a 7 OS but the record shows that the data on the DVD is corrupted

  I backed up the files on a DVD of a XP OS to put on a 7 BONE, but the record shows that the data on the DVD is corrupted. I have run some recovery on the DVD programs and even if she shows that 2.3 GB have been used they are unable to find the data

  * original title - I need fast help please *.

  How is not have you backed up the files?  You just burn it to a CD or did you use the 'NT backup' program of Windows XP?  I don't think that the Windows XP Backup program is compatible with the Windows 7 backup program.  The following link contains an article that explains this condition:

  "Windows 7 backup XP restore"

  If you simply copied the files on the CD/DVD, then it is possible the program that copied the DVD not to "finalize" the DVD.  If you can play the DVD on the computer that created it, but cannot on another computer, then this is probably the case.  If this is the case, then put the disk into the computer that created and put in place the program that burned and look under the 'Tools' menu for an option "Finalize"... and do it.

  HTH,
  JW

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When I try to open Windows media player, is to show that the file wmploc.dll has version no11.0.6002.18111 where11.0.6002.18311 was expected. Help, please

  When I try to open Windows media player it shows that the wmploc.dii file has version no11.0.6002.18111 where 11.0.6002.18311 was expected.  and he prmpting to download from the msn help site.please.

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  This happens usually when the version of wmp.dll is at odds with what is defined in the Windows registry.

  You can follow the steps in the article mentioned below and check if it works.

   

  After the WMP update you an error of wmploc.dll on version number incorrect

  http://support.Microsoft.com/kb/961047

  Hope this information is useful. If you need further assistance, please answer and we will be happy to help you.

• Email sent in Windows Mail show that the email was sent from a secondary account. How can I change the main account?

  Windows Mail

  I use windows mail to send and receive emails.  However, when I send an email from my main e-mail address the response is sent to a secondary email address. My windows mail is set to import emails to this address, but I want the emails I send to show primary not secondary e-mail address. How can I change my settings to show that the email is sent to the primary address. Thanks for any help. Maureen

  1. Tools | Accounts | Mail | Properties | In general. Make sure that the response field is empty for both accounts.
  2. Also in tools | Accounts, make sure that your main account is the default account.
   
   
   

• I can't use the card wifi on my laptop. It shows that the signal is strong, but I'm unable to visit Web sites in Internet Explorer.

  original title: error WiFi

  I can't use my WiFi on my laptop.  It shows that the connection is made and the signal is strong, but can not use Internet Explorer.  WiFi switch is on.  I tried the Windows button more X and that did not help.  I get an error message: the NIC "Realtek TRL8187B Wireless 802. ' 11 b / g 54 Mbps USB 2.0 Network Adapter "experiencing driver or hardware related issues.

  Hello

  Get the latest drivers from the support site for the computer and try to install after you remove the old drivers.

• my pc cannot accept the installation of antivirus, it shows that the system is not suitable for running ms Dos and ms windows app com help me install

  my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help

  Hello

  problems to install your anti-virus software, contact the manufacturer of the anti-virus

  also scan for Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• MY DVD RW OPTIARC AD - 7710H IS NOT READ ANY DISC, IT SHOWS THAT THE DISC IS BLANK, PLS HELP ME?

  MY DVD RW OPTIARC AD - 7710H IS NOT READ ANY DISC, IT SHOWS THAT THE DISC IS EMPTY

  ago nero essential is installed in my laptop, I sort my problem that I did not use my dvd rw for many months, because of which some dust particles accumulated on the lens, and when I cleaned it with clean cloth, it worked, and now my dvd rw works properly, anyway thanks for your help @vijin v...

• The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

  I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

  The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

  My question is where and why it does this?

  Thoughts?

  Thank you

  Tom

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application.

  I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application. Help me please!

  For a built-in webcam see this support from manufacturers or their forums.

  You could I think trying a boot minimum http://support.microsoft.com/kb/929135 and see if its then OK

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Why my "speaker" icon shows that the audio is not working?

  Why my "speaker" icon shows that the audio is not working?

  Hello

  Thanks for posting this question in the Microsoft Community. It seems that the audio does not work.

  Answering these questions that would help us provide a better solution:

  1. What is the full error message you get?

  2 have you tried to install the drivers for the sound card?

  3. What is the brand and model of the computer?

  Method 1:

  Try the methods mentioned in this link and check:

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Also check out this link as a reference are discussed common issues with sound:

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

  Method 2:

   

  Check if the Audio services and dependency are started. To do;

   

  a. Windows Audio

   

  b. Windows Audio Endpoint Builder

   

  And its dependencies are

   

  c. multimedia class Scheduler

   

  d. remote procedure call

   

  e. generator Windows Audio endpoint

   

  a. click Start, type services.msc in the search box.

  b. search for the services mentioned above and check if the services are started and the Startup type is set to Automatic.

  c. If not, right-click on the service and click Start.

   

   

  Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.