My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

Similar Questions

• Windows 8 is connected to the Internet and always says that the connection is limited

  Hello

  For the last month, my computer is connected to the internet, but it is still saying that the connection is limited. Can I'm moving very well, but I'm worried because I know that something is wrong. I have windows defender and Malwarebytes. I ran the resolution of problems, and he can't find the problem. Help, please! Thank you very much!

  I had already run the troubleshooting utility before asking this question.  I was using internet just fine, but when I flew over my connection, it says that the connection was limited.  He said not limited down in the status bar.  He said only when it jumps.  My PC has just crossed several updates to 8.1 which seems to have fixed?  However, I use the PC for 15 years and have never had this problem.

• Yahoo password email changed computer but the iPhone and iPad can always GET mails without updating the password

  Yahoo password email changed computer but the iPhone and iPad can always GET mails without updating the password...
  Normally, it should show as 'could not load the mail' or 'impossible to download the mail' or 'Please verify your password... "
  It's really wired.

  You are probably using IMAP

  Update contained in one place - it synchronizes across devices - all as is your email

  With POP accounts, you'd see what shows your question

  Instructions on how do to vs in IMAP POP3 - IMAP

• Example: officejet j4580: why my printer say my appears not connected to my computer

  Why my printer say my appears not connected to my computer

  Hello @momodeda!

  Thanks for posting on the HP Forums!

  I don't know why the computer does not show the printer offline, but I would be happy to provide help to try and get communicating them again!

  The first thing I would suggest is to power cycle all the devices.  Remove the power to the printer, shut down the computer and remove the power to the router.  Wait 20 seconds, then reconnect the router.  Wait for the lights on the router to return.

  Plug the printer in and turn on the computer.  Once all devices are back on, try printing again.

  If this does not work then I would recommend uninstalling the HP software.  Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Officejet full feature and driver software

  If please, after back and let me know how it goes!

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrat

  I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrating!

  Hi rct_nv ,

  Please provide the exact version of the acrobat application (given that no update available for acrobat 9 as its an older version)

  In addition, I wish to inform that Acrobat 9 is not compatible with Win 10 OS. Refer to this article:- Adobe Acrobat required configuration

  Kind regards

  Christian

• I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say I'm dum

  I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say that I'm connected to the Internet when I try to do.  Anyone have an idea what is wrong?  Thank you.

  Please try: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• My Sony HDR-CX150 is not connecting to my computer and says prepare... and stays like that

  My Sony HDR-CX150 is not connecting to my computer and when I select "USB connection" said preparation... and stay that way for hours without success. Someone can help me.

  Hello Mohammad.
  Welcome to the community of Sony.

  The camcorder appears above all by establishing the connection with the computer. Depending on the speed of the computer, the time to establish a connection can vary. If the problem is still not resolved, connect the camera to a different USB port on the computer. Additionally, make sure that you use the dedicated, supplied with the camcorder USB cable to connect it to the computer. Alternatively, you can contact our team of technical support for additional troubleshooting steps.

  http://eSupport.Sony.com/us/p/support-contacts.pl?MDL=HDRCX150&loc=3

  If my post answered your question, please mark it as an "accepted Solution".
  Thank you for your message.

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• the gme and NEXON combat arms was not letting me use the wasd keys to control. so I left the game, and when I stopped I had a noticce that says error code 21

  original title: Devicewhat is the error code 21

  I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?

  Hello

  We really need more information - ask in the games and/or Windows Forums for your
  version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  You can also check your version of Windows, then good topic Windows: games.

  It is a question where you may need to actually test in several forums.

  Don't forget to check the known issues with the support from the game and forums, but also any device
  in question.

  -------------------------------------------

  Reboot to see if the problem comes back.

  Here are the general meaning.

  21

  Windows removes this device. (Code 21)

  Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Updates failed because Norton began a background scan.

  Windows Vista.  18 of 28 updates failed. Norton started a scan that I wasn't aware of everything and that caused the problem.

  So how the hell do I get these updates installed correctly.

  Cannot delete the contents of the "Datastore" folder or "Download" (in Windows/C:\Windows\SoftwareDistribution) because windows says it's in use, although only this window was open.

  Tried to download and install KB3153171 from here:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=52222

  It started the update of Windows Installer which continued for about two hours doing nothing - I wanted to only install 1 update. I then clicked 'Cancel' and who took 30 extra minutes to cancel indeed.

  Everything that did not should be available to download again, but it is not.

  Or there should be a button "Try again", but there is none.

  I can't uninstall the updates failed because of course, they are not in the list of installed updates.

  Hi Hall2 Toad:

  Please see post # 159 of the ScousaJAY thread windows update just seems to hang when checking in the VistaForums for a possible workaround.  These Windows updates slow (WUs) are currently affecting both Win 7 and Vista. Woody Leonhard has published a series of articles on this issue in his blog Woody on Windows , including Windows 7 update holding scans always? KB 3153199 can solve the problem.

  As suggested by Woody, many users are now the solution posted on the page Web of Dalai Search for Windows Updates takes forever?-a possible solution pre-install a kernel mode driver Windows missing (Win32k.sys) updates listed on that Web page will speed up Windows Update - at least until Patch Tuesday next month, updates are released and you must first install a new update of Win32k.sys.  The author of this Web page:

  "This HowTo is valid for Win7 SP1 and SP2 for Vista, which have been newly installed or have not been updated for some time. "It should also help on systems that have been updated last month - just install the lack of updates in the list below in this case."

  I disabled updates Windows Automatic (a re-boot should stop any session WU, currently running in the background and consuming CPU) and perform a manual Windows Update a few days after Patch Tuesday updates are displayed on the second Tuesday of every month when I know that I will not need my computer for several hours.  I use Norton Internet Security and normally activate silent Mode (clic click right on the Norton icon in the system tray, choose activate silent Mode and select a long duration as 6 hours) to disable temporarily all tasks automatic Norton LiveUpdates as background and scans fast when WU is running.  Activate silent Mode doesn't disable your protection against malware in real time or Norton Firewall smart and I have no proof that Windows Update works really faster when Silent Mode is on, but I'm not all background tasks unnecessary CPU consumption when I run Windows Update these days.  Do not forget to deactivate the Silent Mode once your Windows Update is complete (I hope) to restart your Norton background tasks again.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v46.0.1 * IE9 * NIS v21.7.0.11
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• HP deskjet 3050 series suddenly not connected to my computer

  Model number J610a - I installed this a couple of years ago and had been fine up til a few weeks of work (scanner and printer) with wireless connectivity. I use Windows 7 Home Premium

  Firstly, he said that the scanner was not connected and that I needed to download the software. Whenever I tried to do, he tries to download the software but failed. Now, the printer does not work - it says that the software is installed, but that the printer is not connected to my computer. When I try to follow the steps to connect using the USB cable, the computer shows that the usb cable is connected even! I tried to use printing HP and Scan doctor but that doesn't work either!

  Help, please!

  Hi mpele,.

  I found something that I am confident will help. Please try the following:

  1. Make sure your virus checker is updated and then run a full virus scan.
  2. If you do not have a scanner of Malware such as Malwarebytes (www.malwarebytes.org) I would be one to install and run a full scan and remove any malicious software that is found.

  After these two steps restart then try a fresh uninstall and reinstall.

  - source

  Please let me know how it works.

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.