My iPad has been slow and has now stopped working completely and does not light

My iPad is a few years old (I think that the iPad 2, 32GB model A1395 2, no internet,).  For w a few weeks, it has been very slow but has now stopped completely.  I can't turn on even when connected to a power source.  Any ideas?

Bob

You can try to reset: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). If you see the Apple, you should be in business. Once the reset is complete, the Slide to Unlock screen will be displayed.

If this does not work, you will probably want to pay a visit to the Apple Store, so they can watch. It costs nothing for looking at it. Don't forget to take a go-Genius Bar, so you don't have to wait all day...

Good luck

GB

Tags: iPad

Similar Questions

  • My work as a Photoshop Mix does NOT have the Adobe library.  I have already sent more than 100 things at the library (successfully!)  It has now stopped working.  Photoshop Mix not send.  If I delete the Photoshop Mix of iPad Pro.  It will remove a

    My work as a Photoshop Mix does NOT have the Adobe library.  I have already sent more than 100 things at the library (successfully!)  It has now stopped working.  Photoshop Mix not send.  If I delete the Photoshop Mix of iPad Pro.  It deletes all the pictures in Photoshop Mix?  I had technical support look in my ADOBE Office without success. (case 187698996)  Thank you.  I have several files in the Adobe library and checked all the. Nothing appears from my Photoshop Mix.

    Thank you.

    Susan hers

    Update: Susan fixed this problem by uninstalling and reinstalling the application.

  • I installed a sniper art called game of victory, but it has now stopped working he won't play no more

    I had a game on my laptop called sniper art of victory but it has now stopped working and I can't get it working again. the loading of the game at the level that I saved my game to but then when I go to start the game where I recorded home everything stops and I get a message saying that the game does not run correctly, and windows has stopped, so what could be wrong with the game

    Hey paul bell bond,.

    There could be several possible reasons for this.

    Try to get the game settings to the 'Factory Defaults'. For instructions on how to do it please contact the vendor of the game. Delete all of your temporary files and see how it goes. To do this, run Disk Cleanup.

    See the article below:

    Delete files using disk cleanup
    http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

    Another application could also be in conflict with the game. Perform a clean boot procedure to verify if this is the case.

    Please follow the steps listed in section of the knowledge base on how to achieve this.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    As a last resort, you can uninstall and reinstall the game. It should work.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

    Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

    Hi TG24.

    Acrobat Reader 16.09.21 is now available in the App Store.

    It should solve the performance problem that you are experiencing.

    We apologize for the inconvenience.

  • Photoshop CC 2015 slow and does not work - I want to go back to Photoshop CC 2014

    I am a customer of the creative cloud. Given that I've updated the Photoshop to CC, 2015, a few weeks ago I worked in the worst conditions: the software its sloww now and does not work and I want to go back to the previous version of Photoshop, the CC 2014 which worked very well in my iMac.

    Please, tell me how to download this version and solve the huge problem. Thank you

    Hello

    Please visit the link below to return to the 2014 version.

    http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

    Hope this helps!

  • iPhone 6 had turned hot itself to present back on, it has been on charge all night as it happens still does not light and I tried pressing 2 buttons and that did not work

    IiPhone 6 hot and turned off I left it to cool then tried to put this failure, which held the House and out dressed this also failed, put in charge all night long tried the keys again this morning, which has also failed

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Windows Media Player (32-bit Vista) has stopped working. It does not open when I click on a file that uses or from the main menu. I tried to download and re - install, but get the message "you already have the latest version of Windows Media Player.

    Windows Media Player does not work for music or videos (Vista)

    Hi Palmdoc,

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    You cannot uninstall and reinstall Windows media player in Windows vista, because it is integrated inside the operating system.

    This problem occurs because the Windows Media Player library database is corrupted.

    See the below Microsoft article and try the steps mentioned, check if it works.

    You cannot view, add, or delete items in the library of Windows Media Player 11

    http://support.Microsoft.com/kb/925718

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • We bought paper license for Windows 7 Professional for a laptop... the laptop has now stopped working. Can I re install Windows 7 in a new laptop using the previous button?

    Operating system - Windows 7 Professional 32-bit

    Type of license - license paper

    If previous key provided with the laptop dead, no, you cannot transfer to a new laptop. OEM licenses are not transferable:

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    What is OEM software? :

    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:

    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  • I have a problem with the computer is slow and does not file.

    1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

    The the Task Manager on the two of them performing at about 50%
    I use wifi and same place,
    always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
    Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
    Any recommendation to get rid of these problems?
    2. some viruses had infected my pc,
    I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
    On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
    The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
    It was queries that I had sent to the antivirus company-
    10-20-bitdefender files that are
    > infected. They were initially on my USB, then I connected to another
    > pc. After that, when I connected to my pc, I scanned and that she was
    > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
    > new window and took that wasannoying time. So I copied all the files to my
    > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
    > problem - all the icons or folders remain the same with the name of the folders but
    > the files inside this foldergot automatically changed and I lost all my
    > data. Now, I can't find any of my files on my pc or my USB. PL send me
    > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
    > secure these files. Some files have an another new error that I had
    > downloaded. More files will be downloaded once I have bitdefender recieveemail to

    > that I can answer. PL copy this message in its entirety and add this to your answer.
    According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...
    The same files are include the other way on my other pc.
    Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.
    The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.
    Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.
    201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
    My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
    The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
    Problems-
    1. all files are automatically displayed as shortcuts, even if I had pasted the original file
    2. once I click on open, I get an error and then after clicking on ok, some files get opened
    Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.
    1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

    2. 2 files are missing (attachment)
    3. could you send me the file by e-mail?  You can also download the link below.

    http://labs.BitDefender.com/

    because the webste or browsers (chrome, firefox) are not respongding.
    4. I could get these 2 points. Browse your computer to locate the removable storage device and right click
    its icon.
    3. in the shortcut menu, point to Bitdefender and select immunize it

    drive.
    I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.

    zwhwenever, I click the icon, the window save under opens for all files.
    on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
    my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
    using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
    the error is in German-
    Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
    Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
    Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
    1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
    I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
    BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

    LOL - install software Registry Cleaner to fix damaged or broken registry entries.

    More likely to worsen the situation.

  • whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

    Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

    Hello

    Did you change your computer?

    I suggest you follow the link (this also applies to windows vista)

    Explorer Windows stopped working

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  • The search in Windows Explorer has stopped working properly - it does not find the files which are there, but will find other files that match the search criteria

    Window 7

    Was working before, but have only allowed a number of updates to Windows that had been blocked for a while.

    For example. Type 'safe' in the search box. It finds files and directories with 'security' in the title, but not the files and directories that I can see are there with 'safe' in the title.

    When I search using the "safe * ' it seems to do exactly the same thing as"safe ".  It does not show only files beginning with 'safe'

    My suggestion was not ' safe * ' but ' name of the file: ~ safe * "(without the quotes).

  • Satellite M50D-A-103 crashed and does not light

    Hello

    I have a Satellite m50d-a-103, which takes place in Ubuntu.

    The operating system crashed recently. I'm not sure if the laptop off really or not. But the screen is dark, and the laptop does not start when you press the power button.

    The only thing that made laptop is that the power light flashes 5 times when the switch is released (no matter how long he was supported before). There is no - screen start or anything, the screen is totally black.

    Located help here suggests I have remove the RAM, but I'm not sure it's a good idea, because I'm not sure that the laptop is off.

    What I've tried is pressed the power button for 20 seconds. I tried also pressing the - or what I guess is the reset button on the back of the laptop.

    The only idea I have now is to hope that the laptop does not work because indeed, there not turn power off and wait until the battery is empty. But I'm afraid that it will take a lot of time.

    So my questions are:

    -How can I fix?
    -How can I find out if the laptop is turned off?
    S ' it is not actually disabled, how do I disable it (it has an internal battery, so removing it will not be easy)?
    - Or is this a hardware problem? And if so, how can I find out component that could be the problem?

    Thanks for any help you can offer!

    [for some reason, I can't edit my original post]

    I couldn't find the manual for the a m50d on toshibas website, but I hurt here: http://www.manualslib.com/products/T...A-3509950.html.

    For the white flashing indicator power, it is said: "Indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State."

    So I guess that my initial assumption may be correct. I still don't know not how out of fashion "before" however.

    Any ideas?
    Thank you.

  • iPod started to hum and does not light

    I used a magnetic to ventous for my iPod and it stopped working and started the buzz, now it's just to show message of support from apple

    A magnet, if strong enough and quite narrow can affect the iPod's hard drive.  After removing the magnet close to the iPod, the iPod still 'buzz' when you try to start?  Try doing a Reset (reboot) on the iPod

    Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

  • Printer has stopped working - active service does not work

    Original title: my printer Hates Me

    So... Today, I want to print something... and my windows wrote the active service is not running. So I look at the printers... I have to it is called: USB MFT... I watch the drivers... they look ok. I try to reinstall them. Now even the windows and the driver package will not work. Everything is fine until I have to insert the printer (I downloaded the drivers on the right), then said: "the package could not be installed '... Then I rage and ask a more experienced user...

    Printer: Epson Stylus DX 4000
    Windows: Windows 7 Ultimate 64 - bit edition
    Please help me.

    Hello

    Follow the mentioned below of the methods.


    Method 1: Run system restore

    Video: Solving a problem using system restore

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/fixing-a-problem-using-system-restore

     

    Method 2: Solve printer problems.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Use the troubleshooter from the article above.


    Method 3: Download the latest drivers for the printer from Epson support Web page and install

    Drivers Epson and support.

    http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-DX4000-printer/drivers-support

    Check if the drivers are available for windows 7.

    Epson and Windows 7

    http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=324521

  • Excite Pro AT10LE-A-108 - reboot and does not light

    Hello

    I excite Pro 10 model AT10LE-A-108

    After you have selected 'Power Off' option Tablet closed OK but then restarts again. Only after several attempts to "Power Off" the Tablet closes down very well.

    Any suggestions?

    Another question that was yesterday the Tablet would not turn on / restart! I had looked at footie with Bt over the internet for an hour and a half without a problem. I then closed the screen for half an hour and planned to watch another game on BT the Tablet has been totally insensitive. It would not turn back on or restart.

    This morning I tried again and it works fine.
    Could be another problem related to overheating?

    This phenomenon, I've had about three times. Before I used off I 'State aircraft '. It is ok. This may be due to programs that are in the background. No not global warming.
    If not started, I hold the Start button time longer, about 10 sec. A plug in the adapter.

    Post edited by: ladar

Maybe you are looking for

  • The bookmarks bar now appears automatically when loading Safari - how can I disable this?

    I've seen a few questions posted about this, but from what I can find none have been answered to any success. From today I can't open Safari on my mac (current El Capitan with all uptodate software) without bookmarks bar automatically displayed on th

  • Satellite A200 - message "your computer is locked.

    First of all, I am a novice. Secondly, I have a message on my main screen after opening which reads "Your computer is locked" and I can't do anything with it. I have stopped with the help of the key, closed the lid, control Alt Delete, did all the us

  • Code error-63040 on CRIO

    Hello world I got this error code following when compiling my FPGA code and I move forward without seeing where I made a mistake I am connected to my Ethernet controller I will be grateful if someone sees what is wrong Thanks in advance My best regar

  • Confidante [question on phone call asking for information]

    surprised that you must send notification of fraud when using Adobe customer care calks starting from an unknown and unidentified number and customer demand for credit card details! Shocked![As published for the clarity of the question and the future

  • Superposition of alpha - transparency-implementation

    The bottom of the model, I can't set a transparency in the overlay of the rocker "alpha" by changing the number of percentage. No matter what I have to change the color of the mask is solid. I want to make it transparent to see parts of the backgroun