My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

Similar Questions

• Satellite L350-14F find the router but will not connect

  Hello

  I just bought a new laptop Satellite L350-14F, but I can't seem to connect to my connection wireless broadband.
  My roommate's laptop connects fine.

  The mine finds the network, asks for the WEP key but will not let me.

  I am running Windows Vista SP1.

  Can anyone help?

  Hmm. I recommend you to check the settings of the WLan router.
  If the MAC address filtering enabled and that your WLan MAC address was not included in MAC address filtering, then you would not be able to connect to the router.

  It would also be possible that you try to insert an incorrect encryption key

  Therefore, it would be desirable to disable all the security settings on the router and then try to establish the WiFi connection.
  If this would have functions, then you might reactivate the WLan security settings.

  By the way; Check if an update of the Wlan driver could also sometimes there is some compatibility problems between the Wlan router and Wlan card drivers.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• My firefox is the latest version, but will not update

  My firefox is the latest version, but will not update

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.

• Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

  Hey Joe,

  Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.

  Also refer to:

  Cancel printing

  Maybe you have that impression break.

  View, pause, or cancel printing

  You can also see the troubleshooting steps in Dell for Dell printers.

  Please post back with the State of the question.

• I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What

  I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

  Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP

  You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.

  • Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0

  Make sure that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• Installed on the new laptop, but will not work as wireless? It does not support this device?

  I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.

  You are running windows 7 starter edition?

  -to know

  -Right click on computer

  -Select Properties

  -Look for the system type

  Also, what processor do you have?

• Gadget screen appears on the home page but will not move anything to the homepage

  Original title: you had to send a solution to my problem of gadget #1194371707

  gadget screen happens on my home page but will not move anything on the homepage, you said you would email me a solution, but you responded never please, my case is 1194371707

  Delwyn salvation,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with gadgets.

  1. which browser is installed on the computer?

  2. have you visited a support Chat or call?

  3. What do you mean by 'will not move not anything to the homepage'?

  Since it's Forums Community Microsoft, unfortunately we have not information on case # 1194371707

  Answer to us if you are having problems with gadgets or any other problem of Windows, and we would be happy to help you.

  Good day!

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• Satellite P300 connected to the WiFi router, but no internet connection

  Help!

  I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
  I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

  Any suggestions would be greatly appreciated.

  Thank you

  Hello

  If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

  Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

  Welcome them

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• If I'm totally off power to my PC, (storm in the region) to reset, the cursor appears, but will not move until I restart again.

  If I just powerdown (overnight), leaving a/c, connected, the cursor appears and moves, as my mouse moves.  HOWEVER, if I powerdown and completely disconnect the PC, 110V, to keep safe from one close shot of lightning, THEN the problem appears.  After the storm passed, I plug the PC into the 110 outlet, turn on the computer and restart it.  The cursor appears in the center of the screen, but it will not move when I move my mouse.  THE ONLY THING I can do is hit briefly, the power button to turn off the back and then click New to reboot (twice now)... then the cursor appears in the center of the screen and moves when I move my mouse.

  Yes, I still think it's the battery.  If the computer is turned off but still plugged into the wall, food always provides a small amount of power to the motherboard to keep a ready"" State.  In fact, if you stop it, but keep it is plugged, you can send a packet to 'Wake-on-LAN' through the Ethernet that would then turn on your computer so you don't have to press any button at all.  This requires that some things are always under tension even when the rest of your computer is turned off.  Remove the plug from the wall removes this standby power and now the BIOS of your motherboard must hold his memory by falling back on the battery.

  HTH,
  JW