My iPad is constantly in charge, even if not connected to a power source. Also, it allows me to turn the unit off. No idea what is happening?

My iPad has always been in charge since I unplugged it yesterday and I thought that it might help if I turn off the device. But it turns out that he will not turn me off. I think it is causing other problems that I am more able to launch applications. I'd appreciate any help.

Well it cannot be supported if it is not connected to power. So there must be a problem any which prevents the loading message on. Try to reset your iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

Tags: iPad

Similar Questions

  • My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

    I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

    Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

    Of course, it is a pain. How can I solve this problem?

    Thank you very much

    Hello

    It seems that the new router may not support multicast or was not configured correctly.

    Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

    Some routers does not support multicast or maybe this option is disabled by default.

    I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

    Kind regards

    Shlomi

  • 9.3 OS does not complete on my iPad 2 get message that device is not connected to the Internet, when it exists, a solution?

    WWhen updated my iPad 2 with OS 9.3, when I finally install, during the verification step, message, is that the device is not connected to the Internet when connected. Anyone else have the problem? All solutions?

    Sesame problem on my iPad mini I want to finish the update already

  • Tecra A7 still sees the AC adapter - even if not connected

    Hello

    I've had this problem for awhile now. It happened quite suddenly, one day it worked great, the other day and the following days later, it didn't. The problem is like this:

    My Tecra A7 still "sees" the adapter connected, even if it's not! This can be quite annoying if I turn the laptop on its battery, because it will automatically run on full power b/c of the Toshiba power management utility is installed. That said, running at full power, the battery is discharged very quickly. Beside that, if it is disconnected from the net power for some time, the laptop battery is draining, even if turned off all the time!

    Of course, the problem is not huge. I can always manage the electricity utility myself if necessary, but as you can imagine this probem is quite annoying. And I really want a solution to this problem.

    If someone knows the solution?

    Thanks in advance,

    Arjan

    Hello

    That means the power icon in the taskbar says?
    Have you noticed changes especially after connect/disconnect the power adapter?

    I think it might be a software problem
    I mean the energy saver.

    You he should remove the system and needs to be reinstalled the version downloaded from the European driver from Toshiba site.

    See you soon

  • Devices display in the bar side, even if not connected?

    Hello

    Hoping that someone will enlighten us;

    I have 2 iphones, a 5 and a 6 s that I connect to iTunes to backup and synchronize, normally when they are connected they appear in the sidebar as they should, then I can "eject" them away and they disappear from the sidebar when they are disconnected.  However, for some reason, they are both now show in the sidebar if they are connected or not, and I was wondering if this is correct, it is a new feature included in a recent update maybe?

    Any help would be appreciated, thanks.

    Tim

    Have you set up a connection Wi - Fi sync by chance? Sync your iPhone, iPad or iPod touch with iTunes using Wi-Fi - Apple Support

  • Air iPad 2 closed and it won't turn. I don't know what is happening. :(, que dois_je faire?) Any help?


    Force reboot your iPad.

    Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

    If this does not help, connect the iPad to a source of power for the battery.

  • My Macbook Pro shows off my HP printer online after the first use (print or digital). I have to turn the printer off and then on again to print or scan for even once.

    My Macbook Pro running El Capitan 10.11.6 shows my printer HP (envy 110) as offline after a print or scan session. I have to restart the printer each time I use it, and then the Mac it falls again after printing or scanning session.

    I loaded the latest drivers on the Apple site without success. The two are on a wireless home network.

    Help!

    OS X El Capitan: print troubleshooting

  • error message 'there is a problem with the printer turn the printer off even more'

    I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

    Hi sandrafranks,

    Thank you for your answer!

    In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    Hope this helps and have a great day!

  • HD Lifecam Softwaew charges but camera not connected message

    I tried to use the new lifecam HD on a new laptop of Dell Studio 1555 with 4 GB, 2.4 GHz dual core, a lot of disk space and last Vista 64-bit.

    The software loaded and I connected the camera when told too, not before. Loads of software 3.0, but when it starts it says that there is no camera connected. Rebooted, tried different ports USB etc. No luck. I've never had a Logitech camera on the laptop.

    I checked the drivers via the control panel and the hardware and the driver have load/activated and no material error.

    I tried the camera on the desktop Vista 32-bit, 4 GB, 2.4 GHz (dual-core) with the same results, although once the recognized but camera performance was very poor in terms of speed in HD. After a reboot, I got the error of the device not connected.

    I returned the camera to Frys and they managed to get the camera running with authoring software (I don't think it was the HD).

    Anyone know what the issuance or the corrective action?

    Dave

    The problem is that you may have installed the wrong drivers and it was not to recognize the camera that he was trying to find the camera that was compatible with the driver you have installed.

    All the best!

  • IPad 2 Air battery drained and does not load after update 9.3

    Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

    I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

    I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

    I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

    Any suggestions are welcome. TIA.

    Well, I had the camera to load up to 61% where it is blocked again.

    Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

    I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

    Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

    Hope the above helps someone.

  • IPad Mini will not connect to WiFi

    My IPad Mini does not connect to my WiFi at home. All other devices in the House are connected correctly. It seems that my IPad Mini or the router. I was working well until that Friday. I have reset the router and the IPad Mini, forgotten network, rebooted both, and nothing seems to work. Any further suggestions?

    I suggest to do a hard reset (hold home and power button at the same time) If you have not already tried it. That's worked for me before when nothing else has.

  • Apple removes all functions of the Apple watches sold in the UNITED Arab Emirates, as they do for Iphones and Ipads

    I am considering the purchase of an Apple Watch in the Dubai UAE UNITED. I bought an Ipad in Dubai and was horrified when I discovered that Facetime is disabled on all Apple devices sold in the UNITED Arab Emirates. I want to know is whether Apple are also turning off features Apple Watch som please the Government of the UNITED Arab Emirates?

    Hi, Rodolphe

    There are no regional differences for Apple Watch in hardware or software.

    The included USB adapter pins will be located in the country of purchase.

  • a switch that is part of the battery will charge if it loses connectivity to the master?

    If I have 4 switches configured as a stack - where the StackWise ports are connected within 1 to 2, 2 to 3, 3 to 4 and 4-1. Switch1 is the master.

    If something were to break stack connectivity between 4 to 1 battery still works as switch 4 still has connectivity to control through 3 to 2 to 1.

    Below the output of reference-

    switch #show switch retail
    Switch/battery Mac address: 0023.34b3.5600
    Current H/W
    Switch # Mac address priority Version State role
    ----------------------------------------------------------
    * 1 master 0023.34b3.5600 15 0 loan
    0023.0543.aa00 member 2 14 0 loan
    3037.a6ca.2000 member 3 13 0 loan
    3037.a6ca.6900 Member 4 12 0 loan

    Battery nearby Status port
    # 1 Port 2 Port 1 Port 2 Port switch
    --------------------------------------------------------
    1 low ok 2 none
    2 ok Ok 3 1
    3 ok Ok 4 2
    4 bottom Ok No 3

    switch #.

    With this as the current state 2 reload automatically cause the 3 and 4 to charge because they lose connectivity to control completely or they will stay up as of the individual switches

    And same question again - switch 3 cause reloading will rise 4 to recharge automatically as he lost connectivity to control completely?

    I've seen this happen... so need to confirm if what is expected or we must check and solve another question that might have caused this!

    This is not the expected behavior. A member of the battery is disconnected does not cause other switches to restart. They work as individual switches.

    Cisco documentation:

    An active switch connected to a fully operational
    stack becomes member of the stack. It receives the functioning
    setting up the master of battery
    . When you disconnect a battery Member
    Uh, numbers and port switch
    numbers of the remaining members of the battery
    no change and the switches do not recharge.

    http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3750/software/...

  • the Air iPad does not connect to a printer to air even if the two are on the same network

    DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

    Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

  • Can I use IPad 2. 4A charger to recharge my P70?

    Hello! Can I use my IPad 2. 4A charger to recharge my P70?

    Amperage is not a problem. There are current electronic control in all phones for a higher rating of the charger can damage the battery. It will prolong the life of the charger because of the lower load of appreciation.

    The voltage must be 5V. If the voltage is higher than 5V, it will burn electronic phone and together.

Maybe you are looking for