my iphone 4S hanged and black screen

I used the iPhone 4 (factory unlocked) for over a year now with only minor problems. Like a regular day, I was typing a message to my friend, but suddenly he hung then black screen follows... It was a shock suddenly! . I just put the phone to rest for a while and after about an hour, have crossed my fingers and tried again the Home button, but the black screen continued. If the backlight of the iPhone works I can say that, because I see the phone luminates but the "Slide to unlock" is cannot be seen. Since I have been using the phone for a while, I know the accurate position to "Slide to unlock" so if I slip my finger unlocks it too with the default 'Unlock (click) noise' but again once the icons of the apps is not visible, all I see is a grid and fadely. I get the SMS and calls even though I can't read nor I can see who's calling. Because the screen is blank, I can't use the phone but the phone seems to work.

Try a hard reset by pressing Power and "home" set button until the Apple logo appears. If it is not resolved, try a restore of the phone via ITunes.

Tags: iPhone

Similar Questions

  • iPhone 6 more hot black screen

    TThe screen went completely black with a full charge. The button was almost too hot to the touch. Wouldn't not attached commuter. Is this a recall problem?

    Hi BELCOW!

    I can understand needing my iPhone working correctly at any time myself! You may want to try these steps here: If your iPhone does not illuminate.  Now, if the iPhone has just a black screen and you hear yet or do not have these steps in the article, it would be preferable to contact Apple directly by clicking this link: contact Apple support

    See you soon!

  • Blue and black screen problem

    I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

    Thank you

    Hello

    ·         What operating system do you use?

    ·         You get the error message?

    ·         You are able to boot to the desktop?

    Method 1:

    I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

     

     

    Method 2:

     

    Why my screen is black when I start Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

     

     

    Method 3:

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  • Compaq presario beep and black screen

    Compaq presario sr5450 desktop stop with beep .the beepis on 17 seconds and off for 10 seconds. Ichanged power supplys but still the same beep and black screen

    Hello

    "beep" codes normally indicate a hardware problem / failure.

    Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

    Then read this on the 'beep' error codes to try to see what failed:

    http://www.computerhope.com/beep.htm

    http://www.pchell.com/hardware/beepcodes.shtml

    http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

    If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

    If it is not under warranty, find a good repair shop premises to take.

    Here are the Codes of BIOS "beep" for an HP machine and the reasons why:

    "BIOS Beep Codes.

    http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c02222922&cc=us&destPage=document&LC=en&tmp_docname=c02222922

    See you soon.

  • Icons and black screen that appears when published the missing LMS

    Hello

    I tried to search online, but need some advice on how to solve a problem of publication I encounter.

    Captivate 7

    SCROM 1.2

    When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

    When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

    Comments or the recommendation how I can solve this problem?

    Concerning

    AJ

    Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

  • Start-up/login problem. Vista starts by the boot sequence then cursor and black screen appears but nothing else.

    My laptop recently locked up when running a DVD rip, I waited an hour or so to see if he would respond, but he didn't, so I turned off the laptop by holding the power button down. I restarted the computer and it loaded correctly to the logon screen and allowed me to log in as usual. Once the computer was connected, I noticed that the sidebar was not loading, and when I click on what whether the locked computer.

    To try to remedy this I tried to start the PC in safe mode to perform a restore could noticed that I had not created restore points. I then tried to fill a start last known good config upward, it did not work. Then, I tried a CHKDSK/r procedure at startup. It worked fine until step 3 of 5, on which he seems to hang, I left it overnight and it was still on the same stage. So I have powerd off the PC and tried to start. But now, the PC is delivered to the black screen and the cursor as shown above.

    I created the new folder of the event log of the prompt on the Vista recovery disc option

    I did a repair to start - no problems found

    I checked that regedit in this \Microsoft\Windows NT\CurrentVersion\Winlogon. shell contains only explore

    When you are looking for through other Forums a cause of this problem appears to be to do with the permissions of the user being changed by the chkdsk does not complete, however I don't see how to fix this through the command prompt.

    As noted, I can access command prompt on the recovery disk. Any help or suggestions are greatly appreciated.

    You already did a great job of troubleshooting - exactly what I would have recommended here if you had not already tried.  Play well!  Here is one that you did not and I would start one you tried (because I feel that it is perhaps the root of the problem.

    Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

    If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

    While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to run at the next reboot (but I don't think that will happen if launched from the disk).   If so, answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.  I know you tried this before, but we'll try again by using a slightly different command and see if it works this time.

    I hope this helps.  If this isn't the case, then we should try to reinstall the system (backup first) as only option short taking in a computer repair shop. But we'll see what happens with the first above.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • No start tone and black screen on G5

    Kernal panic, stop G5.

    Market - no start-up tone; black screen; no answer.

    Fans have started.

    Any ideas?

    Have you tried the PRAM reset? Press and hold the Command-Option-P-R keys. Hold the keys down until the computer restarts and you hear the tone of starting for the second time.

  • ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

    Hello

    I recently tried to install a 750TI Asus GeForce GTX on my HP Pavilion P6 2010UK using a SATA 6-pin PCI Express power connector, but after starting I get three beeps and a black screen. Can someone help me with this please?

    As an observation, the PC was working fine before you install the new card.

    Hello

    Many of the graphics cards NVIDIA GTX 750 will not work in the HP PC that do not have a BIOS version 8.  Your PC has a BIOS version 7 and I do not expect HP to publish a version 8 BIOS for your PC.

    Return the card and try one of the models that should run on a PC equipped with a legacy BIOS.

    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF

  • Equium A60-155 - no disk activity HARD and black screen

    Hello

    I reinstalled just WXP on the cell above and everything was fine until I downloaded and installed the site pc diagnostic tool. Restarting the laptop but there is no HARD drive activity and the screen was black after a few minutes it turns off.

    If I insert the Windows XP Home edition CD, and restart the CD turns upward but still a blank screen and no HARD drive, all activity ideas!

    > I reinstalled just WXP on the cell above and everything was fine until I downloaded and installed the site pc diagnostic tool. Restarting the laptop but there is no HARD drive activity and the screen was black after a few minutes it turns off.

    To me it seems very strange that the laptop is dead after the installation of the diagnostic tool. I think that it s only a setback.

    If you are not able to boot from the CD and the laptop doesn't display anything on the screen, then it looks like a serious hardware problem.

    Maybe the motherboard, CPU, or memory modules are dead.
    It's really not easy to tell what's exactly wrong

    I think it s time for an ASP.

    See you soon

  • Reboot and black screen

    Three or four times a day, I get a black screen and restart my computer.  This makes it especially when I'm home, but today it also is at work on a more sophisticated network.  Any suggestions?

    What year MBP and what operating system are you running? If you were to go to newspapers system and post a screen shot of the most recent stop who could help. In the meantime, try this. http://Reinout.vanrees.org/weblog/2015/01/06/MacBook-Pro-black-screen.htm

  • G62t-250 power light lights up but no noise of fan and black screen

    I bought my mother a computer laptop hp G62t-250 in 2010. When I turn on the laptop, following happens:

    1. power is turned on

    2. the CAPS button is on

    3 WiFi light is orange.

    4. NO fan or other sounds.

    5. black screen.

    What is the problem here? and suggestions to fix.

    Thank you.

    If you are not able to make your screen lights up after doing hard reset & bios restore, then this is definitely a hardware issue that must be like.
    But restore BIOS should do several times to make it successful.
    No other way that I am able to suggest other than these if the power appears on the screen.
    Since no fan or spin is heard & screen is true black, I suggest that the chances are slim to get a troubleshooting.

    Try and if it is not
    Give it to get it repaired. Contact HP in your area.

    Thank you

  • Satellite A200 - 1 M 4 do not start and black screen

    I really hope that someone can help you.
    After 15 months my Toshiba A200 seems to have given up the ghost.

    I tried to put it on today and although the blue LED on hold came and the orange clear hard disk there was no other sign of life.
    I tried and tried, but it just wouldn't start and the screen did nothing but remains black.
    I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
    I have no memory material inserted or additional cards as a webcam. Everything worked fine until now.

    I'm not very technical so you know how to help, then please explain as simply as possible.

    I really appreciate any help you may be able to offer!

    > I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
    Why try to press F4?
    However, remove the battery, disconnect the AC adapter, wait up to an hour and then reconnect the battery and the AC adapter.

    If the laptop doesn t boot I think that the motherboard must be replaced. Ask your local ASP for help. They can order and swap the motherboard.

  • Disk error and black screen on Satellite c660-21z

    Hello

    MY SON HAS HAD HIS LAPTOP FOR 3 WEEKS.
    USED THIS MORNING, SHUT IT DOWN IN A NORMAL MANNER, WENT TO START TONIGHT AND GETS A BLACK SCREEN WITH "A DISK READ ERROR OCCURRED. PRESS CTRL + ALT + DELETE TO RESTART»

    I TRIED TO RESTART, TRIED BOOTING IN SAFE MODE, AND THEN RETURNED.

    SOMEONE HAS SUGGESTED EVEN TAKE OUT THE BATTERY AND PUT IT BACK BUT NOTHING SEEMS TO WORK.

    CAN ANY ONE HELP?

    Thank you

    Hello

    It looks like a problem with the HARD drive.
    Please check if the HARD drive is recognized in the BIOS. Switch on and press F2.
    Usually, this will help you access the BIOS.
    In the BIOS on the front page that the HARD drive should be mentioned is that?
    Otherwise, this means that the HARD drive is dead and must be replaced

    By the way: you did not post the laptop model but if it s 3 weeks old, then you must get in touch with Toshiba service, if the HARD disk is defective you should get a new one for free because the warranty to be valid.

  • Satellite L775D-107 is not starting and black screen

    Hey
    I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
    Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

    I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
    .
    Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

    I've got very important documents in United on this laptop, so I hope you can help me.

    Thank you in advance.

    Hey

    My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

    Sombody bnows so this can't be helped?

    Mike

  • Satellite C650 - stuck with the underscore and black screen boot

    Model: satellite C650

    Operating system: windows 7 Home premium

    Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

    Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

    Any help would be appreciated.
    Thank you

    Good news.
    Thanks for the comments.

Maybe you are looking for

  • YouTube videos no longer play

    I recently installed the latest versions of Firefox and Adobe Flash Player ActiveX. Now I get the familiar message of youtube: An error has occurred, please try again later. To learn more whenever trying to view youtube videos in Firefox. Chrome stil

  • Printer print Epson Stylus DX8450

    IK heb mijn net vervangen van bovenstaande printer cartridges. Then communceert printer niet meer puts mijn laptop. Hij geeft niks aan bij inktlevels. HEB (Probleemoplossing) getest, maar hij geeft aan niets. Hij wel, maar between kopieert computer p

  • Automatic Windows Vista updated and now starts earlier... what now?

    My (gateway) computer has Windows Vista and the eve of the last auto update.  When I tired using the ' puter pass the pointer with the mouse controls, but the buttons do not work.  I tried to restart the computer and it wouldn't restart.  I tried to

  • W510 display problem

    Hi guys, I just bought a W510 and found a display problem when using the battery. The display will sometimes dim when using battery power following in the Manager of power Plans: Video playback Maximum battery life Timers (presentation) Optimized pow

  • R & D

    Hi BlackBerry community. My name is Matthew and I am a current student. I am very interested in becoming a part of BlackBerry architecture research and development. At a young age, I had fallen in love with Blackberry - I liked the formal style of ph