My iPhone 4S has had problems with Wi - Fi and now I can't enable Wi - Fi more. Please help me solve this problem!
My iPhone 4S began no not detecting WiFi signals. I have fixed that by removing the SIM card, but after awhile it was not detected at all and kept scanning. I tried to type the details of a Wi - Fi connection in the other section, but it didn't work. He says 'Could not find wireless networks'... I restarted because after removal of SIM card, which fixed the problem and now I can not turn on Wi - Fi. I need a Wi - Fi connection so please help me!
A certified technician have a look...
But it seems to me: I have seem similar symptoms before - as the WiFi radio gave up the ghost.
I bet if you went to "Setting"-> "Général"-> "About" you won't see any address for the WiFi radio.
If so, the radio has launched the bucket and as far as I know, it is part of the motherboard - there is therefore no route to the resurrection really... It is live with it that way, or get a replacement phone. I'm sorry.
Tags: iPhone
Similar Questions
-
After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...
Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.
(1) restart you device.
(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.
(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.
(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4
(5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.
(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).
(7) try the device on another network, i.e., neighbors, the public coffee house, etc.
(8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).
https://support.Apple.com/en-us/HT201252
(9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.
-
Hello
How to prevent a user not to access a table special (xxx)?
This user has SELECT a TABLE ALL privilege. I need to restrict to only not for access xxx to the table, but this table is not existed in its own schema.
But there is access able as select * from schema.table;
How can I revoke this privilege.
Please help me solve this problem.
Thank you
Lacombe
1623609 wrote:
How can I select privilege on specific tables at the same time?
I want to create a new user and grants the right to select for tables, except a table (xxxx).
It will be possible without the keystone of the database?
One way, in several sql
coil doit.sql
Select ' grant select on ' | owner: '. ' || table_name |' to someuser. »
from dba_tables
where
spool off
Then sanity check "doit.sql" and execute it.
-
has had to restore my laptop and now it won't let me download photoshop 10, any ideas tell me that adobe reader is not supported please help
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
-Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
-Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
Drive install https://get.adobe.com/reader
-
I had to do a restore and now I can change is no longer the size of magnafication
I had to do a restore and now I can change is no longer the size of magnafication
Hello
Please go to the Microsoft Community Forums.From the description of the question, we understand that you want to adjust the size of the magnifying glass on the computer?Let me go ahead and help you with the issue.Please answer these questions, which will help us to help you best.
1. do you get an error message?2. what exactly happens when you try to change the size of the magnification?3. don't you make changes to the computer before the show?
I suggest to refer to the links and follow the steps in the articles:Turn on and adjust the MagnifierOverview of the magnifying glassT o change the size of the Magnifier windowHope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further. -
This program is apparently not compatible with my system and now I can't uninstall it, and I have problems loading when you try to access other Web sites, IE Facebook etc.
You should ask in the forums of Firefox.
http://forums.mozillazine.org/index.php?c=4
http://support.Mozilla.org/en-us/questions -
Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI
Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?
Hijeanm9453734 ,
Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.
Kind regards
Nicos -
Question
I can't shoot at a site in the usual browser... in navigation private. I can pull up in other browsers and could pull up 2 weeks ago... now I can't. Please help me solve this problem? Also, I can' signed in 'members only' in private browsing mode.Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
My printer cuts left, emails from Outlook Express, but is OK to print WORD documents. Is someone can you please help me solve this problem?
I have Windows XP.
really grateful for any advice.
Concerning
Spender 9
OE uses IE settings. Then configure things in IE (margins and others) and it should then apply to the when you print from OE.
Steve
-
I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem
Hi soewandichan,
Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.
Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.
Kind regards
Tanuj
-
Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens
Hi Glenn,.
Please try the steps mentioned in the link below and see if you are able to serialize your software.
- Log, activation, or connection errors. CS5.5 and later, Acrobat DC
- Try Solution 2: clean the connection of the cached user information.
Please share the results after you perform the steps.
Thank you
Atul Saini
-
After Encrypting files, I had to reinstall my windows and now I can not decrypt the file
* O.T. > encrypted files
So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file
After attempting to decrypt the files, I'm promped with this message:
Attribute application error
An error occurred applying attributes to the file:
driveletter\filename
Access is denied. \
I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.
Hello
I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.
- What program did you use to encrypt the files?
From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.
Cannot decrypt previously encrypted files
I'm unable to decrypt files encrypted after reformatting the hard drive.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Well, my last computer was destroyed when the son of a friend seeps water so I am rocking a brand new Macbook Pro. Unfortunately, this means that I have to use Yosemite. I am a cartoonist and I draw in Photoshop using a Cintiq. I indeed get bugs like not being able to use some keyboard shortcuts, or by using the zoom or the lasso. But the important thing is that Photoshop crashes when I go to save the work for the first time. No idea how to solve this problem?
Install the MacOS 10.10.1 update to fix the crash bugs generalized in the open and save dialog boxes.
And make sure you have the plugin WhiteWindowWorkaround installed in CS6 (no not necessary in 2014 CC) to work around some of the well-known MacOS issues.
-
I was on Explorer 7 then my explorer9 model downloaded through automatic updates now it won't let me read my emails can any1 please help I don't know if I install explorer7 even once, he let me read email then it automaticlly will reinstall explorer9 again and I'm having the same problem any solutions please thx
There are known problems with Windows Mail and IE9 (see http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-font-problems-after-installing-ie9/a4274c96-d44f-e011-8dfc-68b599b31bf5?page=1) but they do not understand not being able to read messages, you specify more in detail what happens when you try to read a message. In addition, you can try compacting and repairing the Windows Mail database (see www.oehelp.com/WMUtil/).
Steve
-
Please help to solve this problem?
I have two basic edit with user name and password fields:
When you use the following code I had posted as
username: textbox
password: text box (text box moves a little bit in this case, if I changed the width of the box according to the username box, but the characters typed are started from wrong place)
The error is in: when I typed in the user name text box it starts from the left corner of the box in the right order, but when I typed in the password box it does not start successfully in the box. Or maybe the two boxes are not displayed in the correct order.
loginName = new BasicEditField ("username:", "", 28, 0)
{
private int getFont () .getAdvance = iRectX (getLabel ());
public int getPreferredWidth()
{
Return Display.getWidth ();
}public int getPreferredHeight()
{
return 30;
}public void layout (int width, int height)
{
Super.Layout (width, getPreferredHeight());
setExtent (width, getPreferredHeight());
}public void paint (Graphics g)
{
g.setColor (0x000000);
g.drawRect (iRectX, 0, 250, 23);
Super.Paint (g);
}
};
Password1 = new BasicEditField ("password:", "", 28, 0)
{
private int getFont () .getAdvance = iRectX (getLabel ());
public int getPreferredWidth()
{
Return Display.getWidth ();
}public int getPreferredHeight()
{
return 30;
}public void layout (int width, int height)
{
Super.Layout (width, getPreferredHeight());
setExtent (width, getPreferredHeight());
}public void paint (Graphics g)
{
g.setColor (0x000000);
g.drawRect (iRectX, 0, 250, 23);
Super.Paint (g);
}
};First of all, your Image is not visible.
And try this.
LabelField lbluser = new LabelField("Username:"); BasicEditField txtuser = new BasicEditField("", "", 28, BasicEditField.FILTER_EMAIL) { private int iRectX = getFont().getAdvance(getLabel()); private int iRectWidth = Display.getWidth() - iRectX - 2; public int getPreferredWidth() { return Display.getWidth(); } public int getPreferredHeight() { return 30; } public void layout(int width, int height) { super.layout(width, getPreferredHeight()); setExtent(width, getPreferredHeight()); } public void paint(Graphics g) { g.setColor(0x000000); g.drawRect(iRectX, 0, 248, 20); super.paint(g); } }; LabelField lblpass = new LabelField("Password:"); PasswordEditField txtpass = new PasswordEditField("","",20,PasswordEditField.EDITABLE) { private int iRectX = getFont().getAdvance(getLabel()); private int iRectWidth = Display.getWidth() - iRectX - 2; public int getPreferredWidth() { return Display.getWidth(); } public int getPreferredHeight() { return 30; } public void layout(int width, int height) { super.layout(width, getPreferredHeight()); setExtent(width, getPreferredHeight()); } public void paint(Graphics g) { g.setColor(0x000000); g.drawRect(iRectX, 0, 253, 20); super.paint(g); } };
Add them in the HorizontalFieldManager.
Then add to the screen.------------------------------------------------------------------------------------
Kudo press to say thank you to the developer.
Also, press accept it as a button when you got the Solution.
Maybe you are looking for
-
Transfer of pictures to all my devices
Apple said to iCloud photo library - Apple Support: " After taking a photo in one of my Apple devices... Is downloading pictures to all my other devices Apple ONLY after opening Photos App? Or there is an automatic background activity for download wi
-
3D blu ray film on the Satellite A665-14 days
Hello Feel like I am back in the age of darkness of the DVD here... but I'm having a lot of inconveniences to blu ray works. I bought a reader blu ray a couple of weeks, and it took me a few hours to find corel windvd on my laptop (and it is the play
-
I can't get the video stream to display help...
I received a link to see and I can't pull up?
-
WU repeatedly installs the same two updates. KB2686828 and KB2656839.
I am repeatedly offered the same two updates that are installed automatically. When I try to install any other optional updates, they are downloaded but do not install. When I check the update history, there is no failure message or any indication th
-
Hi my Canon BC 2100 has stopped working with this computer. No other printer works with this computer is