my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

Similar Questions

• iPhone & iPad with the same Apple ID, Wifi Dead after # 21 #, cannot call the specific number

  Hi guys, I really hope someone can help out me with this one. Long story short:

  After a week of vacation when we left our iPhone and iPad at home, my girlfriend's iPhone did get any cell phone signal when we came back, said network unavailable in the upper left corner, then we called Fido, the cell phone company, we use to try to resolve the problem. After trying to isolate the problem by changing my SIM card in the phone and SIM card in my phone, we saw that it was related to his SIM card.

  The key to reset cell phone network, has changed twice between the SIM card and after a good 24 hours, his phone was on the right track with the exception that it was not able to call me and only me. We get an error call failed. But she was able to receive calls from me and everyone else. Also, we were unable to set up the voicemail.

  As if the phone thought she was my line because of some flying over the passage of my SIM card in the phone...

  This is the first problem... That we called Fido again. After the usual troubleshooting stuff (reset the network settings, restore the device in iTunes, force the restart, eject and put in the SIM card) the Lady on the line calling in the phone app, the number "# 21 #". Then BAM! no more WiFi on his phone AND his iPad connected to the same Apple ID (not a network problem as all the other device not associated with this specific apple id are ok with this network and wifi iPad literally fall from the moment I hit that famous number) when I press on my wifi network in the list It behaves as it accepts the password, but all is not connect with the wheel spinning without end.

  Thus, employees of die cell phone are clueless and now she can't call me and she can't go on the internet with none of its aircraft. I tried a full restoration of his phone.

  Tomorrow I will try the iPad on my place of work to see if it can connect to the anther wifi network, pending:

  1-don't, anyone know what this # 21 # code is and how I can repair the damage he has done?

  2-is my SIM card remains on his good theory and if so, what can we do about it, if not then what could cause his phone to have a call to a number failed error in particular?

  Thanks in advance!

  Not sure about the theory of SIM card, but my guess is not... don't dwell settings. The SIM card must be "read" on every power up.

  The code in what she you punch is a mobile PHONE for call forwarding. She must have felt you have enabled I guess. It shouldn't be anything else stop call forwarding for his phone, if it was enabled.

  

• I get this message on my Acer but not on my Toshiba with the same browser 28.0 on the same Web site your session has ended, please sign in again

  I have the same 28.0 browser installed on my Acer and my Toshiba. When I connect to a Web site and select an option for certain with the Acer computer I get "your session has completed, please sign in again.

  When I connect with my Toshiba Firefox it works fine.

  Clear the Cache Firefox/tools > Options > advanced > network > content caching Web: 'Clear now'
  
  and
  
  Delete Cookies Firefox/tools > Options > privacy > Cookies: "Show Cookies"
  
  If there is still a problem,
  Launch Firefox in Mode safe
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration.

• I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I paid with Paypal, which is linked to my debit card and already wait two days.

  Thanks to the community

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• My iPhone has an ID different apple that iPad and Mac. How can I make them all the same?

  My iPhone was originally created as a business with the company email phone. The company or e-mail no longer exist, but iPhone continually ask the password to this ID from apple.  I can't update the applications because the phone think again it must use the old ID apple however, I am able to buy apps.  I want all 3 of my devices to work with the same apple ID.

  Applications that request the password for the old ID when they try to put up-to-date are related to this Apple ID because they were purchased with this Apple ID. You will need to continue to provide the password for this Apple ID old update these applications, or you will need to remove these applications and redeem them or re - download if they were free under your current Apple ID

  See you soon,.

  GB

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)

  I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate.  The iPhone does not accept my Apple ID.  He is looking for an address icloud.com.  I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck.  Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office).  Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen

  To be honest, I was going to pick up a new phone this week anyway.  My concern is now that I don't want to not suddenly faced with the same problem.  This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.

  It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.

  Thank you all for any help

  If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.

  If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.

• My I phone was lost a few months a go but I was recivin a subventio of Apple Inc. which is see my phone and I can activat again but not using the phone now then, what can I do about it, but I am now using a moment I phone with the same Apple ID

  My iPhone6 more was lost a few months a go but I received a notice for a while at Apple Inc. that my phone is a must see and I can't activator and again one time, but I'm not one using this phone now, so what can I do on this, but now use an iPhone now with the same Apple ID? If no help on how to use the IMEI of iPhone lost to lock fill?

  I doubt that Apple is you send messages. I suspect it is a pirate who is trying to steal your personal information.

• First New - VM: an element with the same key has already been added.

  
  I get a strange error that I have seen a few other posts, but with no resolution (or at least one that I can find).  When you try to create a new virtual machine using the cmdlet New - VM, I get the error "an item with the same key has already been added."

  Now, here's the key that I've not seen many others to mention.  This ONLY happens on the first attempt for each new connection with Connect-VIServer.  I can create as many of the same machines that I want after that first mistake with the same settings (new name of course).  If I disconnect and reconnect again, the error appears for the first time.

  Normally with PowerShell, I have just to catch the error and be on my way.  However, in this case I use the parameter - RunAsync, so that I can capture the task that is returned in a variable.  From there, I use Wait-task until the virtual machine is complete before moving on with the script.  Everything works fine when the error occurs, but when it happens that the object of the task is not returned and the rest of her vomit script errors.

  I am running the latest version of PowerCLI and I tried this on PowerShell v2.0 and v3.0 and get the same results.  I tried different models and guests without success.  I also tried this with and without assistance - AllLinked on Connect-VIServer-bound mode.  I should mention that I am cloning model, by specifying a spec customization and host cluster data store.  Again, the only common denominator repeatable here is that this ONLY happens on the first attempt to use New - VM session to vCenter.

  Any ideas or suggestions?

  If this is useful at all, here are the details of the output on the exception:

  PS C:\ > $Error [0]
  New - VM: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
  On line: 1 char: 11
  + $VMTask = new-VM-name "NEWTEST20" - model 'Template' - OS...
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [new-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  PS C:\ > $Error [0]. Exception | Select *.

  
  ErrorId: Core_BaseCmdlet_UnknownError
  ErrorCategory: NotSpecified
  TargetObject:
  RecommendedAction:
  SessionId:
  Login ID: /VIServer=USERNAME@SERVER:443/
  Severity: error
  Message: 05/06/2013-09:49:22 new-VM an element with the same key has already been added.
  Data: {ParameterValues}
  InnerException: System.ArgumentException: an item with the same key has already been added.
  to System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDict
  ionary()
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
  taskDescriptionId)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
  Customer VimClient, accessories 2 dictionary, extensionData object)
  to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForCli
  ENT > d__7.MoveNext)
  System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnume
  uidList Maple 1, IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
  IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
  IList 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
  VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
  StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
  customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
  Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
  options)
  to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
  MoList list 1)
  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
  MoList list 1)
  to
  VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
  runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
  TargetSite:
  StackTrace:
  HelpLink:
  Source:

  PS C:\ > $Error [0]. Exception.InnerException | Select *.

  
  Message: An element with the same key has already been added.
  ParamName:
  Data: {ConnectionId}
  InnerException:
  TargetSite: Void Insert (TKey, TValue, Boolean)
  StackTrace: At System.Collections.Generic.Dictionary'2.Insert (TKey key, TValue value, Boolean add)
  to
  VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.PopulateTaskDescriptionDictionary)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.StaticDataServiceImpl.GetTaskDescription (String
  taskDescriptionId)
  at VMware.VimAutomation.ViCore.Impl.V1.Task.TaskImpl.Create (ManagedObjectReference moRef,
  Customer VimClient, accessories 2 dictionary, extensionData object)
  to VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl. < GetTaskListForClient
  > d__7.MoveNext)
  System.Collections.Generic.List to ' 1.InsertRange (Int32 index, 1 IEnumerable collection)
  to
  VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCoreServiceProviderImpl.GetTaskList (IEnumerable 1)
  uidList, IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskServiceImpl.GetTaskList (IEnumerable 1 uidList,
  IEnumerable 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskCore (Nullable State 1,)
  IList 1 connectionUidList)
  to VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTask (Nullable State 1,)
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  at VMware.VimAutomation.ViCore.Impl.V1.Service.TaskServiceImpl.GetTaskById (String uid,
  CmdletTaskInfoProvider cmdletTaskInfoProvider)
  VMware.VimAutomation.ViCore.Impl.V1.Service.VmServiceImpl.NewVM (model TemplateInterop,
  VMHostInterop vmHost, string name, resourceContainer, FolderInterop location VIContainerInterop,.
  StorageResourceInterop data store, Nullable 1 diskStorageFormat, OSCustomizationSpecInterop
  customization, Boolean, Boolean, string 1 Nullable description isRequestedAsync allowNested
  Nullable, 1 haIsolationResponse, Nullable 1 drsAutomationLevel, haRestartPriority, [AdvancedOption]
  options)
  to VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM.DoWork (customer VIAutomation, moList list 1)
  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseCmdlet.DoWork (VIConnection connection,
  MoList list 1)
  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdlet.DoWorkEx (VIConnection connection,
  MoList list 1)
  to
  VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.ConnectionDispatchHelper.ExecuteRunlist (dictionary 2
  runlist, DoWorkDelegate doWorkDelegate, UidDispatchHelper uidDispatchHelper, result of list 1)
  HelpLink:
  Source: mscorlib

  
  

  I was informed that this is actually a "known" bug and a fix has already been planned for the release of the future code.  After getting the access to a beta version, it does not seem to be fixed in the next release.

• Want to sync an iphone with 2 laptops (itunes) with the same account ID

  Hello

  I'm new on this forum, before writing I googled my request, but did not get the exact answer to my problem.

  Perhaps my response was already supported and somehow I missed it.

  I have:

  1: Personal Iphone

  1: personal laptop (ITunes installed with a/c Id)

  1: portable desktop (ITunes installed with the same Id of a/c)

  Description of the problem:

  I want to synchronize my calendars/meetings (Outlook) with my laptop with my personal Iphone desktop.

  Currently what I do and its working perfectly.

  But by the standards of my company/rules, we should not keep any songs/video / / personal snaps/novels (pdf/ebub) on laptop desktop

  So all the animals mentioned above, I used on my laptop.

  Now, I need to sync my Iphone with:

  Laptop Desk to Calenders and prospects for the animals and

  Personal laptop for songs/video / / personal snaps/novels (pdf/ebub)

  should both work without removing other sync

  Is it possible to do?

  It will not work.

  For synchronization purposes, you can have 1 'master '.

  You can use iTunes to synchronize a selection of content and for the other icloud.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Message came up with, "Windows has detected another computer with the same IP address on this netework."

  A message came that said, Windows detected another computer with the same IP address. "... or similar message to one, that could just be the functioning of the laptop for the wireless?

  MurrayJoe:

  > Mean someone has or may have access to my PC or laptop?

  You mentioned a wireless laptop. Do you get this message at home (when your laptop is in communication with your own wireless router), or that you get this message when in a public hotspot?

  If at home, then I would be not too concerned (what security options enabled in your home router?).

  If you get the message while using a public access point, this does not necessarily your computer has been hacked... but it is a warning that you should not ignore. In general, I would not go to any site that has my financial data, or any other sensitive data, a public hotspot. There are too many ways that a public hotspot may be compromised.

  Your original post said that "a message came that said, Windows detected another computer with the same IP address.

  There are several reasons this could happen... some innocent people and some not so innocent.

  If your network is configured for the most common way, then your router uses a feature called Dynamic Host Configuration Protocol (DHCP). You can read about DHCP here...

  http://en.Wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol

  Basically, when a device on your home network needs an IP address, he asks your router and your router assigns an IP address... technically, "rents" the router address for a given period (one day). Once this period has elapsed, the device must 'renew lease'.

  DHCP stops you from the hassle of having to assign a static IP address to each device on your network and then don't forget to retrieve that meet if/when a device are removed from your network.

  Sometimes the process DHCP can be confused and assign the same address on multiple devices. If/when this happens, communication between devices on your home network may be confused. Windows is smart enough to detect that another device on your home network has the same address as the computer where Windows is currently running..., but Windows can not solve the problem.

  You can determine the IP address of the computer that is running Windows (and posted the message you saw)... by entering "ipconfig" (without the quotation marks) at a command line prompt. Then you can check the IP addresses of all devices on your network until you find the other devices with the same IP address. Then you could say either every device to get a new IP address of the router (or restart the device). Alternatively, you can try just stating the computer that is running Windows to get a new IP address (by first entering "ipconfig/release" then "ipconfig / renew" in the command-line invite him... all orders without the quotes).

  But since you said that you are not very tech savvy, my first suggestion was the easiest... just shut everything in your network, and then restart one at a time by starting with your ISP device, router, and other devices. If the problem persists after that, then more troubleshooting (as described in the previous paragraph) would be necessary.

  I hope this helps to clarify the issue for you. If you have any questions, please post them and I'll try to answer.

• rise of Nations pc game United gives an error: "could not initialize services make sure that your video card and drivers are compatible with the game.

  Hi, I recently installed rise of nations pc game but does not work because it says "could not initialize services make sure that your video card and drivers are compatible with the game. What should I do, how can I fix this to get the game to work.

  Hello

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the links and check if it helps.
   
  Known graphics issues in Rise of Nations
   
  Card video known issues
  Known graphics issues in Rise of Nations: Rise of Legends

   

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/