My iphone 6 flashing more gray and white

My iphone 6 flashing more grey and white lines that slide down from the top of the screen, the screen no longer responds, open
applications on its own. I sent to the allowed and EXPECTED service center
12 days then they return it claiming they were put back up touchpad
Flex and the device works well, but I faced the same problem again. Apple needs to find
solution and support for this issue

Had this same problem for about a month. Tried to get the Genius Bar to replace the phone, but it was out of warranty. Cracked, it opens and when looking at phone from there is a chip near top right corner connected with Ribbon on the touchscreen cable. Tighten the screws on the chip in it and it works without problem since a few days now.  Hope it lasts until September.

Tags: iPhone

Similar Questions

  • I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

    I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
    OS El Capitan

    This can help:

    Reboot safe mode (it is a slow process):

    -stop of the mac

    -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

    -When everything started, connect

    -Once connected, stop the mac once again, nothing else is necessary.

    -restart normally.

    Lex

    PS: This clears all system caches.

  • Cannot display images in browsers - diagonal stripes of gray and white

    Some of our users reported issues where they cannot see the images on websites in any browser (firefox, chrome or ie).

    All they can see are gray and white stripes diagonals, in the area where the image should be. Web pages are fine as I can visualize without problems on other computers running the same software. I suspect this is due to an update of windows as this problem seems to be that slowly moves through our network.
    Anyone seen this before?
    Thank you, Kevin

    Hey Kevin,

    ·         What version of IE are you using?

    ·         Is the problem only with browsers or other applications?

    ·         The computer is on a domain network?

    ·         How long have you been faced with this problem?

    ·         Did you do changes on the computer before the show?

    I suggest you try the steps listed in the link below and check if it helps.

    Images are not displayed on Web sites in Internet Explorer

    http://support.Microsoft.com/kb/283807

    Hope this information helps.

  • When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

    When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

    Windows? Update your driver from the website of the manufacturer of the GPU video card.

  • My gradient does not work.  He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can it go back to black and

    He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can get it back to black and white and it will not change... it will not change if I click on any of them.  I think it might be a bug?  Any ideas will be appreciated.  I tried to reset them as well.  Thank you!!

    Check your Options bar.  You have the opacity set to 10%.  Easy to do.  Just hit the 1 key while the gradient tool is selected, and it's done. By pressing the 0 key will take you back to 100%

  • Page has changed from white to gray and white checkerboard background.

    13-03-2011 SNAG- 01.png

    For some reason, the page has changed from white to gray and white checkerboard background.

    How can I change this back?

    Best wishes

    Edit > Preferences > Page Display > untick 'show transparency grid.

  • How to change the gray and white checkerboard background to white?

    I was working on a card with a score of layers. The layers were all fair paths with a white background and I wrote the names of street on them. Just cut and paste, I hit something on the keyboard as now all the origins of the layers of gray and white checkerboard background (which might have something to do transparency, I'm not sure...). I'm not sure what I pressed on, and I'm trying to get the background to white for all layers instead of the checkered gray and white boxes. Any help would be greatly appreciated. Thank you!

    View: Hide the grid transparency (Cmd + Shift + D)

  • Remove the gray and white grid background?

    Hey,.

    I installed Acrobat 9 Pro, version 9.4.1 a week ago. Since then, each pdf document open to one-and-white-grid-bottom appers gray (see figure below).  Normally, I'd expect a white background, which I get under this power only, if I change the background manually to white. How can I change this setting to get the white background, normally by default? Support is warmly welcome - training_needed

    grid.jpg

    Edit > Preferences > Page Display > see the transparency grid

  • Satellite A200-195: TOSHIBA Flash Cards 'black and white cards' does not

    I was wondering if someone can help me.

    Recently, I restarted my Satellite A200-195.

    I found that my flash cards for my function FN hotkey buttons disappeared and are not pop up on the top of the screen more.
    However, I am able to support the other function keys on the keyboard part F1 - F8, one that allows the mouse F9.

    I already uninstalled and installed the added value package, support Flash utility and even tried to update the Bios, but it seems that my Bio is already the latest version.
    After all, that I seem to be able to activate my mouse F9 key, but my other function keys don't work anymore and the flash cards still do not appear like they use to.
    Is this what can I do to get my flash card pop up on screen without having to bring my laptop back to factory default?

    Have you tried to restart Flash cards?
    Start > all programs > Toshiba > utilities > restart Flash cards.

    You can also try is to install the Flash cards support utility if you can find it on the download page of Toshiba.

  • Gray and white table for all other records (line)

    I have the page that queries records db and outputs to a page to display (html)
    I want to know if I can get an output that shows a slight difference for every other row (record). For e.g. first line would have the lesser gray color and the second line would be white color. This is repeated.
    Thank you
    What I write.
    It is in html, cf?
    Like the cells below:
    Like the coldfusion forums page. (for clarity)








    Something like that;


    column headings


    stuff of detail
    closing tags

  • Why can I I see more black and white mask thumbnails in view levels?

    I think it's simple, but I have since the last update until 2015 for CC PS my thumb nails in levels discovered a mask appear more as black or white.  All I have is an empty circle inside a rectangle... I can't say when I paint on the mask I could before... What Miss me?

    See if changing the size of the thumbnails another layer panel None/No thumbnails arranged.

    Right-click on an empty area in the layers panel under the thumbnails.

  • Overview of the issues - gray and white checked

    Hey guys I have the following problem: the Preview on my macbook does not show me the pdf normal documents, but it is totally ok when I get the mac as a guest. The image is down below. I had already reinstalled OS and I still have the same problem. Can someone help me answer to how remedy? Thanks in advance.

    Please, back up all data. Leave the preview runs.

    Hold down the option key and select go ▹ library in the Finder menu bar. In the library folder, delete the following, if they exist:

    Containers/com.apple.Preview

    Containers/com. Apple.QuickLook.UI.Helper

    Group Containers/com.apple.Preview

    Preferences/com.apple.Preview.LSSharedFileList.plist

    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

    State/com.apple.Preview.savedState request registered

    Sign out and then sign back in. Launch the application and test.

  • My MacPro will not start. I get a gray and white screen. Continues to try to restart, but never done! Advice please.

    Care of my MacPro is lower from a previous post.  It does not start, but keep train.  I get the rope to music if I stop and start again.  Advice please.  Thank you very much.  Allan

    Material Information: ℹ️

    Mac Pro (early 2008) (data sheet)

    Mac Pro - model: MacPro3, 1

    2 3 GHz Quad - Core Intel Xeon processor: 8 strands

    8 GB of RAM expandable

    DIMM Riser B/DIMM 1

    1 GB DDR2 FB - DIMM 800 MHz ok

    DIMM Riser B/DIMM 2

    1 GB DDR2 FB - DIMM 800 MHz ok

    Riser DIMM A/DIMM 1

    2 GB DDR2 FB - DIMM 800 MHz ok

    Riser DIMM A/DIMM 2

    2 GB DDR2 FB - DIMM 800 MHz ok

    DIMM B/DIMM Riser 3

    1 GB DDR2 FB - DIMM 800 MHz ok

    DIMM B/DIMM Riser 4

    1 GB DDR2 FB - DIMM 800 MHz ok

    Riser A/DIMM DIMMS 3

    Vacuum

    Riser DIMM A/DIMM 4

    Vacuum

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en2: 802.11 a/b/g/n

    Video information: ℹ️

    NVIDIA GeForce 8800 GT - VRAM: 512 MB

    HH281 1920 x 1200 @ 60 Hz

    DELL3007WFPHC 1600 x 2560

    System software: ℹ️

    OS X 10.10.2 (14C109) - since the start time: 20:27:26

    Disc information: ℹ️

    ST3320820AS_P disk0: (320,07 GB)

    EFI (disk0s1) : 210 MB

    Disc 1 - system (disk0s2) /: 319,21 GB (17,69 GB free)

    HD (disk0s3) [recovery] recovery: 650 MB

    WDC WD5000AAKS-41YGA0 disk2: (500,11 GB)

    EFI (disk2s1) : 210 MB

    System install disks 1 and 2 (disk2s2) / Volumes/installation discs for systems 1 & 2: 16.11 GB (4.40 GB free)

    Disc 2 (disk2s3) / Volumes/disk 2: 483,52 (291,34 free go-go)

    Hitachi HDS721010DLE630 disk1: (1 TB)

    EFI (disk1s1) : 210 MB

    3-1 TB (disk1s2) Dist/Volumes/Dist 3 TB: 999.86 1 GB (328,00 GB free)

    USB information: ℹ️

    Prolific Technology Inc. IEEE-1284 controller.

    Hewlett-Packard HP LaserJet P2055dn

    Hub keyboard Apple, Inc.

    Logitech USB receiver

    Apple, Inc. Apple Keyboard

    Apple Inc. Bluetooth USB host controller.

    EPSON USB printer

    Guardian: ℹ️

    Mac App Store and identified developers

    You still have OSX 10.5.8?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk if Lion or higher

    OS X: on OS X Recovery - Apple Support

    Otherwise start from the installation DVD and keep the boot disk

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    Run the Apple hardware test. You will need one of the original installation discs

    Using Apple Hardware Test - Apple Support

    You may have a bad graphics card. The NVIDIA GeForce 8800 GT - VRAM: 512 MB are prone to failure

  • How can I get my image in psc6 all I see gray and white spots?

    Ive downloaded this twice because I thought it was an error with my computer but I get the same problem. I can't see my image. Please help as I am a beginner when it Carlo in ps.

    Hello

    Looks like it's maybe a graphics driver issue.

    What operating system and the make and model of graphics card you have?

    In the case of photoshop cs6 under (Edit) Photoshop > preferences > Performance you uncheck processor chart use and then restart photoshop cs6, does make a difference?

  • Is anyone elses iPhone on iOS 10 or above show grey stripes and white when you try to restart the appliance just before it stops?

    I restared my Iphone 7 more because I tried to update 10.0.2 and just before it turned off my entire screen turned stripes gray and white goes horzitonally on the screen then powered back and its been working fine since. I tried this on an Iphone 6s and he did the same so, the iPhone was in version 10.0.2. Can someone tell me if this has happened to you? Try to restart your phone to see if it happens. If you have an iPhone 7, you must hold down the power button and the volume at the same time as the home button is virtual now.

    This happened to me on my Mini 4 and my iPhone 6. Both of them work fine, but I noticed the same problem that you have indeed. Must be a bug in iOS 10.

Maybe you are looking for

  • In addition, no trouble with iTunes and QuickTime recovery partition

    T couldn't find the post I put forward...My Qosmio E series (I n know where to find that one is) had a recovery partition, as said in the title... hard disk and I got it to factory settings, and so now, it seems that he doesn t have a recovery partit

  • Simultaneous use of different channels the same Module

    I use DAQ 9178 chassis to control several module, 9421, 9481, 9207, 9263 and 9213. I wonder if I can call two or more different channels of the same Module at the same time without getting an error of conciliation? For example, DAQ assistant1 use 921

  • DVD - RW won't read disk 2 of the installation of the game AION (all no longer then my drive auto ejects cd)

    Hello people, I thank you advance for reading and considering my problem.My problem is trying to install the AION game.Installing the game is separated into two discs. Disk 1 installs perfectly, when you are prompted to enter the disk 2, I go into th

  • Screen pop-up problem in scrolling Manager

    Hello This could be a simple, but one don't know'm stuck. I'm trying to implement a popup screen (mainly for the EULA screen) who has a Manager (Vertical), a RichTextField and a button. I want the EULA text to display in the Manager and only Manager

  • Epson stylus sx425w printer does not

    RECENTLY arrived in heaven and as accepted printer sky but the connection between the computer and the printer is any printer connection is wireless and I have joined usb leads to different time buit still does not are you able too help please.