my iphone 6 is disabled. can I recover the data

my iphone 6 is turned off after that I entered the password OK 'evil' has little time. I can recover the data that I didn't use icloud or itunes?

I searched on the internet and there are some applications that claim to be able to recover data lost on the iphone 6. These applications true or is it a case of me having to throw this phone and get an android who has all the drama of itunes and iclouds?

Advertisement

most of these applications is authentic, but you must first unlock the iPhone...

If you only enter the wrong password several times, wait until you enter the password again, and then put it in the correct password.

If you do not or you have forgotten the password, there is no alternative to 'restore' the iPhone as a sense new, you lose all the data on it. When you have no backups, they will be lost for good.

Here's how this (method 3 recovery mode):

If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

After that, here's how configure the restored iPhone:

Start with the iPhone, iPad and iPod touch - Apple Support

Lex

Tags: iPhone

Similar Questions

  • I accidentally deleted a volume in Windows 7! How can I recover the data?

    I accidentally deleted a volume in Windows 7! How can I recover the data?

    I created a retractable partion on "D" Drive and later to try to remove it and accidentally I clicked on "D" drive instead of the new partition! "."
    Any ideas to recover data?
    Thank you
    Amal

    Hello

    You can try this free program; no warranty if.

    http://www.Piriform.com/Recuva

    See you soon.

  • P20: Can I recover the data after the recovery procedure?

    Hello
    I have a toshiba P20, when I buy, I made 2 partitions, C program and the BONES and F to my personal data.

    I use the restore tools toshiba to restore my windows XP OS, but the restore tools has also reset my partition table and I don't know if I can restore my personal data.

    Everything is done in one step and I saw no warning to say that my partition table will be reset?

    It's just a fdisk or a format really has been done.

    Can I use a tools for restore my partition to lose data?

    I hope that there is an acceptable solution to this problem and in a near future, I'll buy an external HD to perform the backup.

    Hello Alex

    If you want to preinstall the device with the recovery media, you can do this in two different ways:
    -standard mode will be formatted the whole HARD disk and after the procedure of recovery on the HARD drive is just a single partition.
    -expert mode using this mode, you can create partitions if the HARD disk has only one, and you will be able to install the OS on the first partition (the other guy)

    Of course, you did using the standard mode and now the whole HARD disk is formatted. I'm not 100% sure, but in this case only fast format is done before the beginning of the procedure of the facilities. Try to find (Google) if there is a tool that can help you verify if all the data is gone. Using recovery media there is no way to do it.

    Drive external HARD is the right solution for the data backup.

    Good bye

  • can not recover the data in v$ sql

    Hello Experts;


    I have a doubt here. When you try to check the details of the analysis, I am facing problem.

    that menas even I had three rows, but no details about the query verifying v$ sql.

    Please see red marked below.


    A written file afiedt.buf

    1 declare

    v_display 2 varchar2 (30);

    3 BEGIN

    4: v_value: = 100000;

    5 select name from v_display of tab1 where none =: v_value;

    6 DBMS_OUTPUT. Put_line (v_display);

    7: v_value: = 20000;

    8 select name from v_display of tab1 where none =: v_value;

    9 DBMS_OUTPUT. Put_line (v_display);

    10: v_value: = 250000.

    11 select name from v_display of tab1 where none =: v_value;

    12 DBMS_OUTPUT. Put_line (v_display);

    13 * END;

    SQL > /.

    ****

    ****

    ****

    SQL > select sql_id, plan_hash_value, parse_calls, executions, sql_text from v$ sql

    2 where sql_text like ' select name in v_display of tab1 which no % ';


    no selected line

    Thank you

    @ someoneElse

    Thank you!

    SQL > select sql_text, executions of v$ sql where lower (sql_text) like '% % tab1 ";

    EXECUTIONS OF SQL_TEXT

    ----------

    Select sql_text, executions of v$ sql where lower (sql_text) like '% % tab1' 1

  • DataGrid: can I recover the data, BUT it does not show the datagrid control

    Hello

    Hi - I've traced data through php mysql in actionscript but it does not show the datagrid control. Here is my code.

    Import fl.controls.DataGrid;

    Import fl.controls.dataGridClasses.DataGridColumn;

    Import fl.data.DataProvider;

    Import fl.controls.ScrollPolicy;

    Import fl.managers.StyleManager; necessary to format the text in cells

    import flash.display.MovieClip;

    import flash.net.URLRequest;

    import flash.events.Event;

    import flash.events.MouseEvent;

    import flash.net.URLLoader;

    to import flash.net.URLVariables;

    import flash.net.URLRequestMethod;

    import flash.net.URLLoaderDataFormat;

    Create a new instance of the DataGrid component.

    var aDg:DataGrid = new DataGrid();

    var myDp:Array = new Array();

    var myData:URLRequest = new URLRequest ("http://www.cambridgekids.es/kglad/php/getUsers.php");

    myData.method = URLRequestMethod.POST;

    var loader: URLLoader = new URLLoader();

    loader.dataFormat = pouvez;

    loader.addEventListener (Event.COMPLETE, dataOnLoad);

    Loader.Load (mydata);

    function dataOnLoad(evt:Event) {}

    for (var i: uint = 0; i < evt.target.data.cant; i ++) {}

    myDp.push ({number: evt.target.data ["firstname" + i], Apellido:evt.target.data["lastname"+i]});})

    / / trace (evt.target.data ["firstname" + i]);

    }

    myDp.dataProvider = new DataProvider (myDp);

    }

    aDg.dataProvider = new DataProvider (myDp);

    aDg.columns = ['number', 'Apellido'];

    aDg.setSize (800,300);

    aDg.move (150,200);

    aDg.rowHeight = 40; / / allows 2 lines of text in the default text size.

    aDg.columns [0] .width = 80;

    aDg.columns [1] .width = 30;

    aDg.resizableColumns = true;

    aDg.verticalScrollPolicy = ScrollPolicy.AUTO;

    addChild (aDg);

    DOH! I thought I was in the flex forum so ignore my previous answer.

    You must set the dataProvider on the dg after completing the dataprovider with data so spend aDg.dataProvider = new DataProvider (myDp); at the end of the dataOnLoad method

  • How to recover the data file in Oralcle 10 g...? No backups and no newspaper archiving

    All,

    I need to recover the data file 2, which is for the undo tablespace and it is in the State to recover and I need to recover the data files now.

    But the bad news is we have no backup at all and we have no archive logs (log archiving is disabled in the database)...

    In this case how can I recover the data file...?


    SQL > select a.file #, b.SID, a.status from v$ datafile a, v$ tablespace b where a.ts #= b.ts #;

    FILE NAME STATUS NO.
    ---------- ------------------------------------------------------------------------------------------ -------
    1 /export/home/oracle/flexcube/product/10.2.0/db_1/oradata/bwfcc73/system01.dbf SYSTEM
    * RETRIEVE /export/home/oracle/logs/bw/undotbs01.dbf 2 *.
    3 /export/home/oracle/flexcube/product/10.2.0/db_1/oradata/bwfcc73/sysaux01.dbf online
    4 /export/home/oracle/datafiles/bw/bwfcc73.dbf online
    5 /export/home/oracle/datafiles/bw/bwfcc73_01.dbf online

    SQL > archive logs list;
    Database log mode no Archive Mode
    Automatic archival disabled
    Destination of archive USE_DB_RECOVERY_FILE_DEST
    Sequence of journal online oldest 4940
    Current log sequence 4942

    Hello

    First, you must open a ticket with oracle Support and explore the options

    You can use this note to fix:
    RECOVERY OF A LOST IN A [ID 1013221.6] UNDO TABLESPACE DATA FILE

    If you are unable to drop Undo tablespace as Undo Segment recovery must

    You can download the trace file following the opening of the ticket

    SQL>Alter session set tracefile_identifier='corrupt';
    
    SQL>Alter system dump undo header "";
    
    Go to udump
    
    ls -lrt *corrupt*
    
    Upload this trace file
    
    Also upload the alert log file
    

    Kind regards
    Levi Pereira

    Published by: Levi Pereira on November 29, 2011 13:58

  • Tecra M10 - How can I recover the XP PRO key product?

    My TECRA died with the BSoD and it has been well used for the label of the product key as well as the brand and model, and labels it S/N are all well carried away and not readable... I have the product details and s/n of the Bill, BUT how can I get back the XP PRO key product?

    >.... BUT how can I recover the XP PRO key product?
    What do you do exactly?
    You want to reinstall Windows XP Home on your Tecra?
    You want to use the original Toshiba recovery or clean operating system installation disc?

  • Can I recover the pictures that I sent to the trash by mistake?

    Can I recover the pictures that I sent to the trash by mistake?

    Hello

    Have you looked in the trash?

    Recover files from the Recycle Bin - Vista
    http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

    Recover files from the Recycle Bin - Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/recover-files-from-the-Recycle-Bin

    How to restore previous Versions of a file and the folder of Vista (Ultimate, Business and Enterprise)
    http://www.Vistax64.com/tutorials/122127-previous-versions-shadow-copy.html

    How to restore files and folders in Windows 7 with previous Versions
    http://www.SevenForums.com/tutorials/85679-previous-versions-restore-files-folders.html

    ----------------------------------------------------------------------------------------------------------------------------

    This could help you recover a file, or a previous version (all versions of Vista and Windows 7).
    http://www.ShadowExplorer.com/

    ShadowExplorer - recover lost files and folders (Vista and Windows 7)
    http://www.SevenForums.com/tutorials/132087-ShadowExplorer-recover-lost-files-folders.html

    ----------------------------------------------------------------------------------------------------------------------------

    Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
    map of the camera digital or MP3 player. And it's free!
    http://www.Piriform.com/Recuva

    Recuva - Forums - help here
    http://Forum.Piriform.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How can I recover the previous games loaded (Freecell, Spider, Pinball, etc.) on Win XP/SP3 in the start menu

    How can I recover the previous games loaded (Freecell, Spider, Pinball, etc.) on Win XP/SP3 in the games from the start menu. Somehow they must be deleted. If I go to the disc cleaner and click on games to again install it says for me to show the way to C:\i386 and something zclientm. I hope you understand my explanation.

    Hello

    I'm happy to help.

    See you soon!

  • flash drive crashed; Formatt required; any way I can recover the data?

    I downloaded a file to my USB key quickbooks.

    The first time that I saved the file to the flash drive errored out in the middle of recording.

    When I tried to access the file on the flash drive, I was told the drive needed to be formatted.

    Is it possible to recover the data on the flash drive?

    Thank you.

    Hi RexSweetwood,

    The problem that you are experiencing is very common, it is often caused by the pluging and unpluging the flash hard drive. In this case, you probably can't get your data from the flash drive, however, if the data in the flash player are very important, you can contact the manufacturer of your flash drive to ask if you can recover the data.

    In other words, in this case, you can easily get your fixed USB (the manufacturer can do it), but you probably cannot recover the data.

    Good luck to you.

    Gavin

  • I use Live Mail client and SSL, but I can't recover the messages in my subfolders in my Hotmail account, how can I do this?

    I use Live Mail client and SSL, but I can't recover the messages in my subfolders in my Hotmail account, how can I do this? I can use a web browser to display, but Live Mail client only update the subfolders, only the Inbox.

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • Accidentally erased administrator account. How can I recover the account?

    Administrator account

    I accidentally delete my administrator account. How can I recover the account?

    Hi desmondlau,

    ·         Did you completely remove the account?

    ·         Do you have any other user account on the computer?

    ·         If so, is that a Director or a limited account?

    Try the following.

    Step 1: Try to start in safe mode. Check if you can login as administrator.

    Step 2: If you are able to connect, and then create a new administrator account and other changes. Restart the computer in normal mode to see if you can connect.

    Microsoft Windows XP - overview of user accounts

    Microsoft Windows XP - Types of user accounts

  • How can I recover the missing titles C:\Windows\system32?

    How can I recover the missing documents?

    My problem is with silverlught. I get the error 0x64C code when you try to install the updates to silverlight.

  • How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!

    How can I recover the files and programs before a system restore?  my document folders are all empty and my programs will not open!

    I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.

    What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.

    I am a fool! I can't believe what's happening.

    Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?

    Thank you all!

    Sally in Georgia

    Looks like you did a system rather than a system restore recovery.  If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer.  Usually, a step in this recovery is to do a full format or quick of your drive.  If you did a full format, your data is permanently lost.  With a quick format, your data may still be there, somewhere but inaccessible by normal means.  Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media.  Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery.  It will be cheap and there is no guarantee.

    Impatient, remember investigate you a backup strategy for your computer and critical data.  Hard drives can go wrong with little or no warning.

    HTH,
    JW

  • Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

    Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

    Lately, I'm leaning toward the Hiren's BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the most recent version

    The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

    It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

    Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

    If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

Maybe you are looking for

  • Equium L350 - Vista fails to start after the installation of recovery

    Hello world I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said

  • noise of 9205

    Hello everyone, I'm having a problem of balancing slot chassis and signals acquisition facility space.  Systems cRIO I built in the past used maps 9219 universal to acquire my signals analog 4-20mA.  However, I found that to 4 channels per card cost

  • Samsung Galaxy S111 4 pilot Sapphire G

    G ' Day to you all,. Can anyone of you good people help out an old fart in Australia please? I'm looking for the USB driver for a samsung galaxy 4 G driver Sapphire S111. Thank you for your time. Richard. E-mail address is removed from the privacy *.

  • Lost access to docs after the PC recovery

    I hope you can help. I got my PC successfully several times using the recovery hard disk partition. Previously, I took the effort to back up all the files, but on this occasion I chose to use the recovery option standard, which is supposed to make th

  • Can I use my copy of Windows 7 on my wife's PC?

    I bought a copy of Windows 7 Edition family for my personal PC for more than one year.  Can I also use it on my wifes PC legally, the PC is not networked and if so what measures of record must consider to do?


HashFlare