my iphone 6s unexpectedly close and do not restart?

Similar Questions

• Please advise? My 6s close and does not restart.

  Hi there my iPhone 6s + death randomly on me. It is around the age of 3 months and I had no previous problem with him. Any advice?

  Force restart your iPhone...

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, charge the battery to 100% and then restart. Do not use the iPhone while it is supported. It will load faster.

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• I have a problem with my samsung R60plus. Whenever I am in stop, he fails to close and sometimes it restarts when it didn't close. A blue screen appears

  I have a problem with my samsung R60plus. Whenever I am in stop, he fails to close and sometimes it restarts when it didn't close. A blue screen appers and this are some of the info it shows. Problem signature: problem event name: BlueScreen the system Version: 6.0.6002.2.2.0.768.3 locale ID: 2057 of additional information about the problem: BCCode: 9f BCP1: 00000003 BCP2: 852F46B0 BCP3: 862089E0 BCP4: 85531008 OS Version: 6_0_6002 Service Pack: 2_0 product: 768_1 files that help describe the problem: C:\Windows\Minidump\Mini111211-02.dmp C:\Users\EMMANUEL C\AppData\Local\Temp\WER-36555854-0.sysdata.xml C:\Users\EMMANUEL C\AppData\Local\Temp\WERBC76.tmp.version. How can I fix this annoying problem

  Hello

  ·         You did changes to the computer very recently before that this problem occurred?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Blue screen errors can be caused by either a software or hardware problem. This article contains steps that you can take to try to resolve the problems of software only. If you can't solve the problem by following these steps, you may experience a hardware problem. In this case, you must contact your computer manufacturer or a computer hardware technician for help with hardware issues.

  How to fix bluescreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

   

  Method 2:

  Follow the form of measures troubleshooting article and check if that helps.

  "Stop 0x9F" error or "Stop 0xFE" on a Windows Vista-based or Windows 7 computer that uses certain USB AMD EHCI host controllers.

  http://support.Microsoft.com/kb/982091

• My IPad sudenly turned off and will not restart. It is fully charged.

  My IPad sudenly turned off and will not restart. It is fully charged.

  What you have tried so that he could begin until For example you soft-reset/reboot trieda? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

• My 6 month Apple Watch stopped charging and will not restart.

  My 6 month Apple Watch stopped charging and will not restart.

  Hello

  Try the following steps:

  Charge your watch about 2.5 hours, making sure you follow the instructions in charge here:

  Check your battery and load your Apple Watch - Apple Support

  After charging, if your watch has not already restarted automatically:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If it still does not start, then try force it restarts again: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• Satellite P300 question, shuts down and does not restart intermittently.

  My wifes p300 presents a very confusing and annoying problem. She is now on her 3rd replacement the last two having the same problem.

  I just turned off intermittently for no reason, a few times, it will restart but sometimes he used. So if I remove the battery and plug in the power that it restarts again however it then turns off again and do not restart unless the battery is returned. I think it may be a problem with the battery and the power cable as she said that the problem will only get worse if the computer will run on battery power for a while.

  I was wondering if anyone else has experienced this problem or had any suggestions as to what could be the problem.

  Bill has soon

  Hello Bill and please describe your opinion on this subject. Reading your first post I ve also thought it should be overheating issue, but after this second announcement, I imagine that the food may be responsible for this turn off suddenly question.

  Please post the results of the investigation. It can be really interesting to know what the problem is here.

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• I have a problem with my iPhone 6 s more battery.  When he arrives less than 30% the phone will stop and will not restart unless I connect it to the charger.  Once it reboots it shows the same battery as the entry stop percentage.

  I have a problem with my iPhone 6 s more battery.  I had to 'support' from Apple telling me there is nothing wrong with the battery, I was at the store and had them test and I had two replacements and they all did the same thing, even to start the replacement up as a new phone so that there are no applications that could contribute to the problem.  I told them repeatedly it was their software problem, but they said they had never "heard of someone having this problem.  I have not updated to the latest version of the software to see if the problem still occurs and initially it didn't, but then he was back at close to 30% or less, even if there is a power adequate to continue much longer.  I've updated to the latest version because it refers to a "correction of battery problems.  Unfortunately, it makes no difference at all.  I had iPhones for many years and have always been a fan, but my next phone will be a Samsung unless Apple admit to their problem and sorting.

  When you've got additional phones you restore from a backup or set up as a new device?  If the first case, then this is probably your problem.

  Restore the configuration as a new device / phone and be on your way.

  PS None of your fellow users on these forums really care if you get a samsung and I don't know that apple will do fine without you as a customer.

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iPhone 6s just exploded and will not respond

  iPhone 6 s.  I don't know the rest of the spec, because I can't access my phone.

  I took a picture.  A few minutes later, I tried to open my phone and look at the picture, but the phone does nothing.  I tried the home and power buttons.  No response.  He must be about 60-80% power after it loads this morning.  There is no other symptoms I can think of the report.

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• Apps will not close and will not be Mac restart

  Hello

  ______________

  MacBook Pro (retina, 15 inches, beginning 2013)

  2.4 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1536 MB / NVIDIA GeForce GT 650 M 1024Mo

  OSX: 10.11.5

  ______________

  After the upgrade to osx 10.11.5 Some Apps do not close properly. A free App Icon(with the black dot) remains on the dock. I can start the application again, which leads to an additional icon. When I run the command "killall Dock" multiple icons dead is reduced to one. It seems that for most opengl using the Apps are kept in the Dock after closing.

  After a while, some of the Apps start more. Photos.app throws an exception "invalid pixel format.

  The only thing to get rid of the icons and the problem with apps not from, is to restart my mac.

  A normal reboot or a stop will not work (so I am unable to install the latest update of the operating system).

  I have to use 'sudo shutdown-h now' or hold down the power button.

  Does anyone else have this problem or even better: a fix for this problem.

  Thanks in advance,

  Torben

  What is Wacom software installed on your Mac? If so, upgrade to the latest version. If it does not help uninstalling the Wacom software, including possible elements of Wacom/Bamboo in System Preferences > users and groups > Login.

  http://www.Wacom.com/en-us/support/FAQs/drivers-software/how-do-i-uninstall-a-Dr iver-on-mac-os-x

• My new iPhone 6s appears as the iPhone 4s in iTunes and will not be synchronized.

  Recently updated the iPhone 4s to 6 s. backup used in iCloud on the phone again the installation program.  Now, when I try to sync my new phone with iTunes, I get a pop up saying that my "iPhone 4S is not compatible with this version of iTunes.

  Hello

  What OS X you are using? iOS 9.2 requires OS X 10.8.5 or later which in turn need latest iTunes 12.3.2.

  JIm

• ESPN radio stream loads fine for 1 to 2 minutes, then closes and will not continue. works fine on other browsers/computers

  ESPN streaming broadcast radio charge very well and plays well for 1-2 minutes, then stop reading audio with no error message or warning, tried on another computer with chrome and he plays without quitting. YouTube and other streaming sites work properly with my computer and FF in the current configuration, but espn is the only one that gets me boring mornings! All plugins, modules and FF are up-to-date, I tried to disable them and test but problem persists - thank you

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences< enter > in the address bar

  Select Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.