My iphone gets hot when the loading is this normal?

Similar Questions

• BlackBerry 8530 BlackBerry Smartphones gets hot when it comes to this topic.

  I recently got a BlackBerry Curve 8530. After having to speak on this subject 15 minutes on the phone started having hot, wifi is discontinued and theres no dowloads on it what so ever. This could be a problem serious or - is this normal for this type of phone? My old Curve 8330 never got that way. Please answer this question then I can decide to send the phone in for a replacement.

  Hello

  Here are a few tests that you can run to determine things...

  I recommend that you try to start in Safe Mode, which will remove the automatic enforcement of all 3rd party applications function and the module:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charged battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem. Carefully note please that 'new' and 'know' are not necessarily the same things. Although rare, a 'new' battery could certainly be defective. On the contrary, the easiest (and cheapest, btw) method to perform this test is to find someone with an identical BB which has no problem... trade in batteries and see what happens. You can also run these tests in normal mode and safe.

  Good luck and let us know!

• Satellite L655 is hot when the games

  Hello

  I just bought a Toshiba Satellite L655. It has 4 GB of RAM, Intel Core i5 480 m, card ATi 5650 graphics and Windows 7 Home premium. There is a good graphics card to play games high-end however my laptop seems to get hot when you play the older and I think that my laptop overheats if I played all the top end of the game because when Iam, playing old games the cpu is at 60 degrees celsius in less than an hour.

  What should I do?

  Hey Buddy,

  > the cpu gets to 60 degrees celsius in less than an hour.
  How did you check the temperature? Such a tool from Toshiba is unclear to me that tells you the exact temperature.

  In addition if the CPU would really reach 60 ° Celsius it normal s behavior all at stake because the CPU runs on 100% usage and other components like the graphics card, motherboard, RAM, etc. also produces a lot of heat. Don t worry about it, the laptop is much more warm while in game.

  Have you noticed problems like the black screen or a stop? If this isn't the case, everything is ok with your laptop. :)

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• I have a webapp when the load list page I want to get the list with a default filter

  Hello

  I have created a Web application, load when the page of list of webapp, I want to list page showing items with a default filter, how do I get it?

  Thank you

  CAD

  It goes like this:

  -set up your categories or classifications in admin

  -Add a class module to your page by example/format of lists, in the following

  {module_webapp, 12345, c, 98765} where 12345 is the application web and 98765 id is the id of category (if you are using the Add-ons Manager, he will do it for you

  -create links witht in the following format:

  /listings? CategoryID = 12345

  /listings? CategoryID = 67890

  and so on.

  When you land on this page /listings with the category id in the url, the web app module filter elements of web application and view only those who belong to the category of the URL id.

  I hope that helps!

  Mario

  www.twoblokeswithapostie.com - help BC partners since... forever!

• iPhone 5s stuck on the loading with the apple logo bar

  my iphone 5 s is currently blocked on the loading with the apple logo bar, my home button does not work (I normally use assisstive-touch), ive tried connecting my phone to a laptop and then connect to itunes, but when I connect to itunes it say «to allow access, answer on your iphone» I don't know what to do and need my phone. Help, please.

  You must get the repaired Home button in order to connect to iTunes to sync or restore data.

  Help here > repair - official Apple iPhone Support

• iPhone 5 s watch the load but will not load

  My iPhone 3 months 5 s done this time in ten days. When the charger is plugged in, it shows the loading sign. But the percentage has not increased and finally the battery gets drained. After that, it shows the screen below. I tried to charge the phone after that continuously for more than one day and not luck. Instead forge the phone for a day or two and plug the charger - it comes up with the apple logo. And behaves a good boy a week before the issue resurfaced surface again. Tried all the settings I found on the internet and no luck. It does not start in safe mode as well.

  

  I took it to the istore. They tried to Flash, check the battery performance. Everything was perfect reported. After a day with them, he would be back to normal and they return saying that the problem is solved. They seemed helpless. However, I managed to show them the question to live when he did not, and showed support. It has been three times I gave the phone to the istore and had back in the same State.

  I'm the only person who is faced with the question of all the lucky iphone owners?

  Should I ask for a replacement? I am facing this problem since the first week, I started to use the phone. The inconsistent behavior irritates more that guys istore says they will not be able to request a replacement. Ask a serious help in this. I don't think I can live with that.

  I think that this forum is noticed by the technicicians\officials of Apple. Any help on this would be much appreciated!

  Thank you!

  See you soon!

  Amandine

  Hello

  Back iPhone to store ask for a replacement.

  Your iPhone has had an intermittent fault

  See you soon

  Brian

• Light me back when the load

  When I arrived at the 7 1800 HP Tablet that was dead and are charged without coming on. Now that I've set up and started using it, it shut off when put on the charger. I tried set-aside

  • Turn off, then plug the cord into the Tablet (turn right back on)
  • Plug the power cord in the Tablet and then turn it off (turn right back on)
  • Turn off once it turns it self is back on (always turn right back on)

  Any way I can solve this problem that has become a daily event and prevents the tablet to get a full charge as the first load right out of the box? It's my first HP Tablet, I have a BlackBerry PlayBook and nothing like what happens to it.

  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the HP Slate 7 and HP Slate Pro 8 free of charge so I can better answer questions on the Forum.

  When you stop the charger as described by the previous poster and plug the power adapter that the slate should be charging.

  With the slate completely off and plugged adapter, press the power button and release.

  A picture of the battery should appear which reflects the current state of charge. If the battery is empty, you should see an image of an internal battery described in a very dark color.

  If the battery is fully charged, you should see a symbol of lightning bolt inside the picture of the battery on the screen for a brief period, showing that it is connected to a charging source, then you should see an image of solid battery. You will see only the image of the battery on the screen if the unit is off. If the slate is selected, you will see a text statement that displays the State of charge as the last picture below.

  

  

  Slate picture 7 fresh battery status when the unit is off.

  

  

• BlackBerry Smartphones green LED when the load

  Hi all

  I wonder if you can help me, I charge my phone in its cradle every night in the bedroom. I had to turn in bedside mode when charging. Problem is that if I keep the phone then I get notification sounds when you receive emails etc. If I turn off the phone and docked I get the Green solid light that lights up the room when completely loaded. So any info on the following:

  1. disable the Green LED when loading?

  2. can I configure bedside mode to enter in silence?

  3. can I plan a silent mode to switch at some point?

  Thanks in advance

  Creeky

  I have my bedside mode configured to turn off the wireless radio. In this way, I don't get the emails until I turn radio wireless (at the exit of the bedside mode).

  Another thing to do, is do not use the charging base, but using the cable plug and return your phone so that the light is directed downwards and not upwards.

• The default value for the elements of the page get ready when the session is disabled

  Hello
  
  I am facing this problem, do not know how to solve this problem. Basically, the default value 'elements' on the page don't prepare you when the session is disabled and I visit the page for the first time. So when I check the session for the first time, all page elements are null. But when I revisit the page, page elements sometimes gets.
  
  Don't know what I'm missing here... Someone has encountered this problem before?
  
  Thanks in advance! Kindly let me know if you need more clarification.

  Is there a way that the page element can be defined at the time the page is loaded for the first time?

  Yes. Create a "Page Rendering" PL/SQL process. That it is very early in the page rendering (i.e. "on charge ‑‑ after Header"). Set the value of the element of page here:

  BEGIN
    :P10_MY_ITEM := 15;
  END;
  

• Problem with the Accordion widget open flashing and closed when the loading of the page

  Why do my flashes of accordion, widget open and close during the loading of the page (see http://vincentballmusewebsite2013test.businesscatalyst.com/digital-illustration.html#.UVDr Ehx7JyII) tried everything to solve this, and Adobes customer service is terrible, they don't get back to you when they say they will.

  Please help me someone,

  Thank you
  

  We have a difficulty which will be included in the process of testing for version 5.0. Except for a few unexpected correction main side effect, it will be part of 5.0.

  Private for 5.0 beta program will probably start in a few weeks or more. To try the fix and/or to provide feedback on the new features and bugs that you encounter, you can join the program of private beta (Non-disclosure Agreement required) via the Help menu of Muse. Members of the program will be notified when Muse 5.0 Beta 1 is available.

• iPhone not charging when the Mac is in mode 'sleep'

  Before the OS X El Capitan 10.11.6 version update, I was able to charge my phone while my Macbook Pro was in mode 'sleep' / with the lid closed. Since the update to the latest version of El Capitan, the power to the USB ports immediately turns off when the laptop goes to sleep. Is it possible to fix this?

  Try a different USB port. There is only 1 USB port can charge the iPhone when the lid closed.

• How can I get rid of the practice (news this morning) of messages that appear at the bottom of the Inbox message list when I don't want to see them?

  Until this morning, I could the cursor up and down on my list of the Inbox for messages I wanted to open (or delete without opening). Now, each message darn, the cursor stops on - or sometimes even just past above - appears below the line at the bottom of the list of messages. This means that I can't see so many messages listed at the same time as I could yesterday.
  I can get rid of the line (and the message that open automatically below) only by moving the cursor down on the line. I don't want to do that with every message that I make a break on or exceed. If I want to open a message, I'll open - it is not so difficult.
  I imagine that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.
  Thanks for any help.

  Re; I guess that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.

  There is no such feature added, because it would be ridiculous to implement.
  The problem you are experiencing is not a problem with Thunderbird.
  It is likely to be your mouse, mouse pad or keyboard.

  Emails do not open without a statement to open. That statement comes from the mouse, mouse pad, keyboard, then this is where to look.

  Either you're inadvertently clicking or your settings are too sensitive or maybe something is stuck, your mouse/keyboard mat is recording your action and act on it.
  Action comes from the mouse or carpets to mouse or keyboard and the computer includes an action is required and performs this action in Thunderbird.

  Determine if what you are doing when it occurs, what method to use and check the settings.

  I would go in your computer control settings to get for example: mouse pads
  and check the settings for sensitivity.

  If you use a mouse pad, it's too easy to press slightly harder and move cursor is interpreted as a left click. Check the sensitivity settings.
  Maybe your keyboard should be cleaned as keys become sticky.
  If you use a mouse, then make sure that your hands are not inadvertently pressing the buttons, the checksensitivity settings or maybe the mouse begins to fail, if not too sentive.

• My iPod Touch 5 G gets hot during the use of any application.

  Hello. Get - my iPod very sweet-hot everytime I use ANYTHING. Even if it is the only application running. He sometimes unpleasantly warm to keep it. I left for a while to cool off, but heat just backup again. (Note: the top of the iPod heats up for the most. This is where the battery.) I've owned my iPod for less than a year, but I buy used off of eBay. (he was "released to nine seller") y at - it means to solve my problem, or is my battery just worn out? I don't have a warranty and do not have the money to fix it. Thanks in advance!

  Make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem. Appointment/diagnostics are free

  https://www.Apple.com/retail/Geniusbar/

• Satellite M40-265 gets hot on the left side

  I noticed it right after that I bought and went serving Marktkauf, they said it's ok. But now it's for sure NOT ok!
  I tried to measure the temperature on the left side where the warm air comes, and she was already above 42 c as the thermometer, shown error.
  The keyboard is also hot on the left side. It is uncomfortable for the hands and more I fear for the laptop.
  What should I do? How to get the service?
  I'm in Germany, Berlin, bought in October 2005.

  Thank you!

  Hello

  On the left side of the laptop, you will find the fan grids.
  I guess there is the cooling module and placed CPU.
  The cooling module produces the heat on the left side.

  Usually the laptop supports protection against overheating. This means that the laptop stops automatically if the temperature rises to the high critical level.
  If you laptop is not closed automatically so I guess that the temperature is not high.

  However, you can try to check the settings in the energy saver and change the cooling method.
  But if you think that there is something wrong with the fans or the module of cooling so you can ask the ASP in your country to help him.
  Here you will find the right service partner:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true