My ipod is not recognized when I connect it to my USB port

Similar Questions

• USB device not recognized when I connect my iphone to my computer

  Original title: USB device not recognized

  I get the error message "Unrecognized USB device" when I connect my iphone to my computer.  It is the same as the one I use for months.  Same computer.  Same sync cable.  I have changed everything, including hang iphone to my wife instead of mine and get the same message.  I also did a restore on my computer that doesn't change anything.

  Hello

  At this point, I think it's a good idea to run a scan for viruses/malware on the PC with the anti-virus software that you have installed.

  Also, if you haven't already, I would try removing the USB controllers and restart again, now that the updates of Windows are installed. Don't forget, you can even download the drivers directly from manufacturer support site for your PC, if they install automatically when you restart after their removal.

  Finally, take a look at the thread I linked below. The first answer is quite similar to that mentioned above in this thread, but there are also a few other really good measures listed there as well. Then take a look at the linked thread and see if that helps at all.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

• I have an android Tablet and my usual laptop recognize it when I connect it to the usb port

  my laptop recognizes my usb webcam but not my pc android tab

  Hello

  1. what operating system is installed on the laptop?
  2. do you get any error message when the tab android PC did not get recognized?
   
  
  Method 1: perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
   
  Method 2: Check the tab pc android with another computer and see if it is recognized.
   
   
  Hope this information helps.

• WHY MY USB DOES NOT SHOW WHEN IT IS PLUGGED INTO THE USB PORT?

  I use my USB key, windows7 ultimate 32 bit is not show I have uninstall all and restarted my computer (laptop), but still does not work, I downloaded some readers but still does not he continues to show me this in Device Manager, I have used several USB but it still doesn't work do not? I'm going to enjoy anyone who helps a lot thanks

  

  Hi Ali,

  Thank you for the update.

  I suggest you to run the next Fixit and check the status.

  Automatically diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  What it fixes:

  • When you install a hardware device, it is not detected
  • Determine if your audio device is plugged
  • The driver updates are not installed automatically by Windows Update
  • You receive one of the following errors:

  Click on run Fixit.

  Please let us know the State.

• automatic password is not recognized when I change the password, but in vain

  automatic password is not recognized when I connect in outlook express. He saw the day without obvious reason. I tried to change the password, but to no avail.    A ny comments or solutions?  Jong

  Hi Jong,

  ·         What is the full error message?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  Save the password setting will no longer exist in Outlook or Outlook Express

  http://support.Microsoft.com/kb/290684

  I hope this helps.

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  Hyperlinks don't work in the presentation on the projection screen, not 'View presenter' on Mac to display.

• The dial of the watch is not recognized when I touch it or by scanning

  Sometimes the dial of the watch is not recognized when I touch it or by scanning. This could be the cause?

  Hello

  It can help to restart your iPhone and your watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  original title: I see questions but no answers. Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  I have vista on my dell desktop pc. Some how I managed to disable the fast user switching and I wan't to reactivate. I see this same issue, and it implies that the answer to the question, but I see no real response. I see online that using 'gpedit.msc' will open a window to access the problem, but my computer can't find it. Can you please help.

  The Group Policy Editor is not included in the Home of Windows versions. You can use one of the other methods in this article:

  http://www.Vistax64.com/tutorials/89939-fast-user-switching.html

• My gmail does not refresh when I connect to my account.

  Original title: gmail is my sign into account but will not regenerate

  my gmail does not refresh when I connect to my account. I know I have mail in my Inbox because it is there on my phone.

  If your gmail email address is your user name Microsoft Account, it is not actually going to receive incoming emails by default.  For example, you can go to www.outlook.com and sign in with your Microsoft Account (your gmail address), but there is no email because the email is really going in the Google Web site.  There is one step more that it takes to get your gmail emails flowing through them so you options for how do.

  1. Configure your Microsoft account to 'pull' your gmail emails
     This method sets the upward so that the Microsoft Account connects to Gmail, downloads email and then displays them on your computer Windows 8.  You make this unique facility of inside Outlook.com.  I've written about how to do it on my blog here (I wrote it for a different purpose, but the steps are identical).

     If you perform this step, you can also delete your Google account from your phone and setup of your phone to synchronize with Outlook.com instead.  You will always get and send emails with your Gmail address, it uses just Outlook as server.

     or

  2. Add your Gmail for Windows 8 Mail App separately
     This option is easier to install, but I do not personally (just because of how Gmail behaves a little different). But there is no problem with him.  I've written about how to do it also with a video demonstration: Use Gmail in Windows 8.

     If you use this option, go to your Mail application settings and uncheck the "E-mail" to your Microsoft Account (the first listed email account) so that you do not have two accounts showing in your email application.

  I would like to know if you have any questions or problems.

• my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  Return to the previous MAC OS until it's resolved.

  Lightroom and El Capitan | Mac OS 10.11

• Why not the serial number is not recognized when I got Adobe?

  Why the serial number is not recognized when I got Adobe? I have an upgrade of CS5.5 Design and Web Pre3mium worm. CS6. I use the CS5.5 serial number.

  using cs5.5 serial number when you are prompted for the serial number of the 5.5 version or when you are prompted for the serial number of the version 6.0?

  If cs5.5 is already installed, you will be invited to the series of 5.5.

  If you are sure you entered the correct serial number at the OK prompt and always having a problem, contact adobe support: www.adobe.com/support/chat/ivrchat.html