My jams of mac pro early 2015 on pressing enter and back button

Similar Questions

• Mac Pro early 2009-7950 HIS Itceq Turbo / 3GB

  Hello

  I bought a GPU 7950 HIS Itceq Turbo / 3GB GDDR5. I tried with the Mac Pro early 2009 (10.9.5) and a 4K monitor, but it does not work perfectly.

  The DVI output is good, but the max resolution only 1080 p. If I use with cable MiniDisplay, and view the right side monitor scratches and horizontal 5 seconds noise appears on 60 Hz. The monitor works fine on 30 Hz. I tried SwitchResx app for the best refresh rate, best rate exceeded the 55 Hz, but the horizonte noise not.

  The other problem, the boot music played twice each time, so pluged the DVI. If the MiniDisplay cable was plugged music start playing around and he played with white screen. The only way to start if you connect the cable

  The seller never try it with a 4K monitor, so I do not know is the card works well.

  The 4 K is Acer BX320HK. It works very well with the MacBook Pro late 2013 (10.10.5) with Nvidia GeForce GT 750 M 2048 MB same MiniDisplay-Display cable.

  Is there someone who uses this card with MacPro and 4 k monitor?

  Thank you!

  The specifications of the card say:

  2560 x 1600 per display (DVI Dual-link)

  You use a dual-link cable?

  I can't find the manual so I don't know what input DVI resolution lets you get.

  What version of OSSX on the MacBook Pro? If more Mavericks try upgrade to the same version of OSX, you can do a test on another HDD for testing with installation.

• My Macbook pro early 2015 keeps "freezing".

  Hello fellow Macbook users,.

  I have a problem with my Macbook pro early 2015, that bothers me. I've got El Capitan installed 10.11.4.

  Maintaining Mac freezing randomly and soon after the touchpad turns off as well. I have no other choice than to turn it off using the power button. I can't find a model by the problem, it's just a coincidence. I am a fairly new Macbook user and I don't have that much knowledge about the product, still.

  I really appreciate all the kind of help I can receive.

  Best regards

  Enes

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information

• Mac Pro early 2008 OS 10.6.8 at 10.11 on a new SSD upgrade

  Hi all!

  I want to spend my Mac Pro hard drive to an SSD with a new installation of El Capitan, but I also want to continue to use Adobe CS3 (I can't afford a new version... > _ <).  I read that some people have a lot of problems after upgrading their operating system, even when you use the legacy of Java 6 to CS3.

  Someone at - it good tutorials step by step to install a new OS on a SSD?  I have the adapter for my Mac to use the SSD drive also.  I'm not * that * tech savvy, so I don't want to spoil anything!  :\

  Would it not be possible to keep my current hard drive with Snow Leopard and run Parallels or Fusion for Adobe CS3 on my SSD?  I've never used Parallels or Fusion (preferences?), so where the Snow Leopard operating system to be need?  On a partition on the SSD or can it be on its own hard drive (the one I'm currently using)?

  Also do not know when I improve my OS, how do I tell my Mac to start El Capitan and not Snow Leopard so I keep the older operating system on its own hard drive?  It is system-> startup disk preferences?  Is that how I can go back, if I need to?

  Here are my specs:

  Mac Pro early 2008 (MacPro 3,1)

  Quad-Core Intel Xeon 2.8 Ghz

  16 GB RAM 800 MHz DDR2 FB-DIMM

  HARD drive 500GBx2 (one is currently my Time Machine, I'll use it as a backup of my photos)

  500GB SSD (no not in my Mac still installed)

  4 TB HARD drive (will have Time Machine on half)

  El Capitan would be really slow on my Mac Pro or should I go with the Mavericks or Yosemite?  I'm just trying to extend the life of my Mac as long as possible!

  I'm really sorry for all the questions!  Thank you very much for any help!  ^____^

  ~ Christina ~.

  -Unless you have already "purchased" Mavericks or Yosemite is is not available for download.

  -I just download the installer of El Capitan from the Mac App Store and run it and order that EL Capitan to be installed on the new SSD. You can then by pressing the Option key at startup to choose which version of the OS you want to boot from. You can set either as the default startup in system preferences > startup disk.

  -During installation, you use the configuration wizard to migrate SN drive stuff. YO can also do it later using Migration Assistant but who has created a new used with the migrated data.

  -With 16 GB of RAM and an SSD El Capitan will be fine

• Replacement for trust Mac Pro early 2008

  Hello

  Looking for a replacement for my very reliable and expandable Mac Pro early 2008.  I got it in 2009 after the death of my PC and on the eve of Apple, highlighted the 2009 model.

  Looking for a replacement and do not know whether to go for high spec 27 "iMac or Mac Pro.  Welder instead of videographer professional seriousness.  All I get will be faster than the current Mac Pro despite many improvements over the years.

  Thank you

  Matt

  As an amateur, I think you should seriously consider any movement until the 2009 model or later. Same factor form except the processor and RAM are on a shelf at the bottom of the Cabinet.

  They are faster because of some of the architecture changes, accept more RAM and still have the PCIe slots that allow you to add upgrades.

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• MAC Pro early 2008 display goes off during execution of CPU

  My Mac Pro screen turns off at random. I have two screens. Most when it goes out when the system processes more than workload, but he died sometimes even its not working any program. Any help would be appreciated.

  Details of the system

  MAC Pro early 2008

  2 2.8 GHz Quad - Core Intel Xeon processor: 8 strands

  32 GB OF RAM

  ATI Radeon HD 3870 - VRAM: 512 MB

  Cinema HD 1920 x 1200

  Cinema HD 1920 x 1200

  Note the time of the next problem. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of the problem. Suspicious message here.

  Also check the fan on the video card. It runs smoothly and free of dust?

• I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan.

  I want to exchange a larger HDD (Mac Pro early 2009) and at the same time improve Cougar to El Capitan. What is the best way to do it?

  I think the best would be a new installation of El Capitan on the new HD and reinstall the applications on the new HD, and then migrate the data and setting for the previous version of OSX. In this way the least unused stuff enters the new OSX version

• Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade

  Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade.

  The only option I have found is to click again on the download button, but the circle of download rest bike for a long time and ultimately that nothing happens.

  See if that helps...

  Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.

• Mac pro (early 2008) suddenly doesn't recognize RAM

  Model: Mac Pro (early 2008), 2 x Quad Core Intel Xeon 3.2, 20 GB (should have been 24Go - only recently realized that Genius bar replaced RAM they lost with bad spec, so we have to work outside 20 GB for now), NVIDIA GeForce 8800 GT 512 MB, startup disk 500 GB SSD, 1 TB SATA 7200 RPM, 2 TB SATA 72 RPM.

  O/S: Yosemite, 10.10.5 (14F1509) (to date). Waiting for the seeds with Adobe in El Capitan to be ironed out before the upgrade.

  Background: Mac runs slowly, and the fan is constantly on high even if Mac is not that much. Checked, only 16Gb 20 Gb showing, which then deteriorated to 12 and finally 8 GB of RAM.

  Checks / actions so far:

  -C' IS good RAM for this machine, IE 800 MHz DDR2 FB-DIMM, provided by Apple.

  -All the RAM recognized before (he's been there more than a year and the last time I looked, it was see 20 GB, which is what is inside).

  -DIMM is properly matched on boards.

  -Boards are fully seated in the riser.

  N ' had not moved machine or s/w recently updated.

  -Removed and replaced DIMM, which dumped first tips of handling static etc. carefully according to the instructions from Apple. This resulted in reduction of recognized with 12 GB of RAM.

  -Again re-allocation of places 2nd; It resulted that 8 GB being recognized.

  -Same report (8 GB) I look under > memory or under Activity Monitor > memory

  -No obvious problem with DIMMs or connectors; No dust, scratches or crud.

  -Replace the LANDAU and SMC

  Now at the end of the straps with a job to get out (and Lightroom being a bigger dog than usual with only 8 GB of RAM. I read all the posts I can find on this point, can't find anything I did not... Ideas please people?

  The FBDIMM used in these Macs run hot and die. You did probably nothing wrong, and there is none of the extrinsic factors that prevent your RAM from functioning. DIMMs indicate does not are diagnosed properly - they're dead.

  You can buy more if you want to run more.

  Make sure that you buy DIMM modules with the huge heat sinks and Apple has approved the temperature probe, or they will die sooner.

  As a preventive measure, you can use a third-party program to modestly increase the fan speed.

• Stop guard my Mac Pro (early 2008) and it is difficult to restart.

  I have a Mac Pro (early 2008) still works after the installation of El Capitan. The problem is that after a few hours he will leave, and to restart, I have to switch off/on power and try to restart several times. Sometimes, the fan runs at full speed. What could be the problem? Help, please!

  Have you blown dust lately?

  It starts better if left to cool for one hour about?

  If get you it to work again to get MacFanControl to see all time & the fan speed may adjust higher if too hot...

  http://www.CrystalIDEA.com/Macs-fan-control

• Mac Pro 2013 become hot, not answer and stop.

  Hello

  I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.

  I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.

  

  Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:

  I also used for better CPU and GPU thermal compound I found on the market.

  

  BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.

  The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?

  Best regards

  Which component was 48 c?

  What was the hottest component?

  It's not hot at all.

  From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750

  • Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

  Apple cannot help you because you have disassembled the Mac.

  You already reset the SMC to take part. try resetting NVRAM/MRTP memory

  How to reset the NVRAM on your Mac - Apple Support

• A Dell U2414H can work with a mac Pro 3.1 (10.9.5) and an ATI Radeon HD 2600 XT?

  Hello

  Here's my dilemma. I recently bought a Dell U2414 as a 2nd monitor to replace my old 2407FWP Dell (has died) with the understanding that the new monitor would work (via a DVI to mini displayport cable). I bought a high quality 3rd party DVI to mini display port cable. Obviously, the monitor does not. I can't get a direct Dell response if this will never work. My hunch is the graphics card can not simply to manage this monitor and it won't work with my system.

  FYI: I also have an old DELL G2210 (resolution: 1680 x 1050 at 60 Hz) on the other DVI port. So I'll still need a DVI port.

  Here are the current video card info:

  ATI Radeon HD 2600 XT: VRAM (Total): 256 MB

  Here is my Mac info (on 10.9.5):

  Model name: Mac Pro (early 2008)

  Model identifier: MacPro3, 1

  Processor name: Intel Quad - Core Xeon

  Processor speed: 2.8 GHz

  16 GB OF RAM

  Firstly: If someone can give an answer as to if the monitor works with this graphics card, just to settle this matter and move?

  Second, assuming that no, my choice appears to be:

  1. return the screen and try to find another 24 "that will work with the original map (someone there suggestions for what is currently still deployed that would work with such an old graphics card?)
  2. upgrade the map so it can handle the new monitor but still run the old.

  I chatted with OWC on this subject and they suggested 2 possible upgrade cards but they will not be returned since they could not guarantee that they will work with this monitor there is a risk.

  Dell has been pretty useless (I have no one said yes, the other doesn't).

  Here are some suggestions from OWC (see below). Can someone comment and tell me if or the other will definitely work or offer another solution? I would really appreciate it!

  ATI Radeon HD 4870

  https://eShop.MacSales.com/item/Apple/MB999ZMA/

  Or more likely: ATI Radeon HD 5870

  https://eShop.MacSales.com/item/Apple/MC743ZMA/

  I know there are more expensive options (Saphire?), but I don't want to spend $500 for a graphics card on a 8 year old computer.

  Thank you!

  Best,

  Joel

  This is a screen with a displayPort, a DisplayPort outside and a Mini DisplayPort connector, in 1920 by 1080 max resolution.

  You are WAY overthinking this. A mini DisplayPort to mini DisplayPort or a Mini DisplayPort to [size] DisplayPort should do all the work for about US$ 10, no conversion.

  You don't need another card unless your is dead.

• Adobe first Pro CC 2015 support direct import and editing of sequences H.265?

  Hello, please let me know if Adobe first Pro CC 2015 supports direct import and editing of images H.265. If not, when?

  Hi dchakalov,

  Hello, please let me know if Adobe first Pro CC 2015 supports direct import and editing of images H.265. If not, when?

  First of all, we don't know what will be called the new version of Premiere Pro. We will not support this format in the next release of Premiere Pro. We cannot say exactly when the feature is applied, but please, leave your request here: http://adobe.ly/feature_request

  Thank you
  Kevin