My keyboard is not recognized by windows when connected to the USB ports.

My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

Original title: keyboard problem

Hi Caragata,

Perform the steps from the link below and see if it works.

Tips for solving problems of USB devices

Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

Good day!

Tags: Windows

Similar Questions

  • Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

    Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

    Disconnect all USB storage.

    Run this tool by do right click and choose 'run as administrator '.

    Of course, all first extract it:

    http://www.Uwe-Sieber.de/files/drivecleanup.zip

    If your XP is 32 bits, use the Win32 folder.

    Reset.

    If you still can't find the drive, assign it a drive letter in disk management.

  • External 2.5 "HDD cannot be recognized when connected to the USB port

    I have a Toshiba drive aluminum 2.5 external hard "which is not quite 1 years old yet and my pc is no longer picking up as a hard drive, I tried it on several other PCs then it goes blue after about 30 seconds, but still nothing happens

    Can you let me know what I need to do?

    Kenney

    Hmm, looks like a HARD disk crash
    Eventually it s a HARD hard drive work if the HARD disk access is not possible
    This damage of s and I doubt this is repairable ;(

    In my option, you will need a new HARD drive

  • Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

    Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

    Windows 7 Professional 32 bit.

    Hello Graboots,

    Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • My laptop does not recognize that anything that is connected to the USB ports

    Help, please. My laptop does not recognize that anything that is connected to the USB ports.

    Moved from feedback

    Original title: problems with USB ports

    Hi Alba.

    1. who is the operating system installed on the computer?

    2. What is the brand and model of the computer?

    This issue may be caused if one of the following situations arises:

    • The currently loaded USB driver has become corrupt or unstable
    • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
    • Windows may be missing other problems hardware or software updates
    • Your USB controllers may have become corrupt or unstable
    • External drive can enter selective suspend
    • Your PC motherboard may need updated drivers

    I suggest to connect the USB device to a different USB port and check.

    You can run the Fixit provided in the article and the Coachman.

    Reference:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems

    You can also try the steps in the link and check if it helps:

    Reference:

    Tips for solving problems of USB devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Note: Apply to Windows 7 as well

    Hope this information helps. Response with status so that we can help you.

  • How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

    Orifginal title: Aggrevation

    How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

    Hi ElginCarelock,

    You can try to restart the computer and check.

    Uninstall all USB device manager entries

    a. Click Start and typedevmgmt.msc and press ENTER.

    b. expand Bus USB controllers.

    Note: You will need to scroll down to find this point.

    c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

    d. Repeat steps above for each controller USB is listed under Bus USB controllers.

    e. restart the computer and check.

    Hope this information is useful.

  • iPod 4th generation not recognized when connected to a USB port.

    Original title: question

    When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

    Hello

    Check with iPod Support and Forums for more information if necessary.

    -IPod support
    http://www.Apple.com/support/iPod/

    iTunes and iPod Support
    http://www.Apple.com/support/

    Each iPod - iPod help & Technical Support (part 3)
    http://www.EveryiPod.com/iPod-help/index.html

    ---------------------------------------------------------------------

    For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

    Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
    (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

    Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
    drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
    computer. Change the MP3 in MTP mode - it power off and plug it in.

    ======================================

    There is a plugin to let WMP sync music to an iPod:
    http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

    WinAmp supports iPod
    http://www.Winamp.com/

    How to use Winamp to manage your iPod
    http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

    WinAmp - Forums
    http://forums.Winamp.com/

    6 ways to synchronize your iPod to computer without iTunes
    http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • HP Officejet 8500 A909g is not recognized by my computer when plugged into the usb port

    I received an email from HP recommend I install new software for my Officejet Pro 8500.  I downloaded the software and installed.  The printer was working, but it would not scan. I got an error message telling me to re install the software because the analysis part has not been installed. I have downlaoded software again and installed it. During installation, the mode had to unplug the printer, so I did. (It is connected using the usb cable directly to the back of the computer).  When installation instructions came at a certain time, it told me to plug the printer. I did, but it was not recognized.  I checked the box to install all the software and install the printer later.  Now is back, and the printer is still not recognized by the computer.  Help, please.

    Hi Steve_finch,

    What operating system you have installed on the computer?

    Have you tried a new USB cable or a USB port on the computer?

  • HP 10 more 2201RA not recognized under windows 7 connected via usb

    As the title says. Receive connect the tablet to my computer via the USB port nothing happens. The device is not displayed. I followed the instructions in the troubleshooting section (Manager of peripherals and USB Root Hub etc.).

    The SDA device appear the first time that it has been connected, last night. However this morning... nothing.

    After using the connection to synchronize from the MyDocs toGO application, I unplugged the unit. I do not however the disassemble everything first.

    Thanks for the responses...

    I went with... done AirDroid work, works great and is wireless.

    See you soon

  • Devices not recognized unless it is connected through a USB expansion port

    Came to use a scanner that was not used for some time and unrecognized device.  Tried reloading drivers, but still no good. Bought the new scanner/printer combo, but not recognized after loading software.  Finally managed to make it work via WiFi. Thought, I'd better try another material... iPOD touch... "unrecognized ', Sony e-raeder..." not recognized '... panic!  Has finally got the devices to be recognized by the connection via an expansion Belkin 4 port hub.  Any ideas on how to solve the problem of USB ports not recognize my hardware when connected directly.

    Have you tried to update the drivers from the chipset manufacturer of PC or motherboard manufacturers websites?

  • Satellite M30X powers off the power when you touch the USB port

    Hello everyone, just registered and it is the first problem:
    As there is no general hardware forum, I post my problem here.

    I got it twice, my laptop
    (Product: Satellite M30X, Version: PSA72E - 008010GR) just went completely off.

    Motherboard:

    NorthBridge: Intel i855GME
    SouthBridge: (ICH4-M) of 82801DBM LPC Interface Bridge
    Motherboard model: Toshiba EAL20

    USB:

    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI controller #1-3
    Version: 1.0
    Interface: UHCI
    Frequency: 48 MHz

    82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI controller
    Version: 2.0
    Interface: EHCI

    I have the latest Intel Chipset drivers installed and Windows XP Home SP3 with all updates.

    Once when I hit just the back USB ports with a USB plug, the other time when I unplugged my bluetooth key (climbing din't remove it).
    There was no blue screen or message of any kind, not even in the registry after you start the system again or this fatal system error box when you start after a system error.

    Just a total failure. But it works fine the rest of the time. I also tried to remake the script, but it didn't work.
    I have cleaned with a vacuum cleaner to remove dust and has taken a good look, but saw no difference to the side track.
    Maybe the clamps of the wand to shield a little more out to the contact pins on the rear.

    What bothers me a bit, it's some time ago, I had the laptop one computer my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.
    Still works well. Now for me, that I broke the USB port Insider somehing.
    I could not determine also the loose parts or unfirm at all.

    Y at - it there, diagnostic software that measures the motto of the port or power problems?
    I have a multimeter, fetch short-circuits with it?

    I saw a package of drivers Intel for USB 2.0 over there, but I can't find it on their page, advice?

    Thank you very much for your help, I just wanted to update my RAM and now I am not so shure if my laptop will last the next week.

    Fabian

    Hello

    I put t know any diagnostic software that could analyze this question, I think that a technician of the ASP may be able to provide exactly this question results

    > What bothers me a little is that some time ago, I had the laptop and my knees and I forgot that a memory stick has been connected to the rear. The stick was pushed up and was slightly damaged.

    I think this might be the reason why the laptop stopped while you touch the USB port eventually ports were damaged by using the memory stick, this could cause the laptop off

    However, what we can do is to provide some suggestions and assumptions
    It you want to know why this is happening exactly, then you need to contact a technician laptop for a control.

  • CarPlay audio quality of the voice when it is connected through the USB port is poor vs Bluetooth on Pioneer AVH-4200NEX

    Hello!

    I recently installed a Pioneer AVH-4200NEX unit, I was super excited to improve my car with the support of CarPlay, and everything works great except for one thing.  When I connect my iPhone (6s +) to the unit via a USB cable and a standard phone call, the audio quality is very bad - hail, very downsampled, and metallic sounding compared to the use of Bluetooth via the unit to pioneer for the same phone call (I'm on LTE, using HD voice, although the quality difference is quite noticeable on the calls not HD and on the 4 G calls).  I looked for an answer to this question, but the best that I can find mention of limited USB bandwidth and try to juggle than the bandwidth for the rest of the CarPlay experience, although I don't buy not because audio via the iPhone connected with USB playback is just as clear that it is through Bluetooth.  So my question is: How can I submit a bug report Apple about this behavior and (b) do you have other CarPlay users also be known this recent problem on a unit of Pioneer NEX (AppRadio included)?  It would be great if this is a bug of Pioneer for which they can release a firmware update, I'm just worried that it is a codec problem specified by the CarPlay, so non repairable.

    Thank you!

    -Seth

    Hello served,

    Thank you for using communities of Apple Support.

    I understand that when you use the USB cable for your iPhone in your car with the audio CarPlay is mediocre. I know how it is important for you to hear your calls clearly. In a situation like this, I recommend the steps described in the following article to help solve the problem.

    Configure CarPlay to use with your iPhone

    Specifically the section to get help:

    Get help

    If CarPlay does not work as you expect, here's what you can check. After each step, try to use CarPlay again.

    1. Make sure that Siri is turned on.
    2. Restart your iPhone and your car. Depending on your car, you can see the CarPlay home screen when you turn it on. If you do not, look for the CarPlay logo on the screen of your car.
    3. If possible, connect your iPhone to a different USB port in your car.
    4. Try a different lightning to a USB cable. Make sure that the cable is certified.
    5. Update to the latest version of iOS.
    6. Check the manual using your car. You may need to install updates of firmware for your stereo.

    See you soon

  • HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

    I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

    Hello

    Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

    The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

    Let me know the results.

  • Windows Update KB2756872 kills the USB ports

    Hello.  I just went through the update to Windows 8 Pro.  I have a big problem with the KB2756872 update.  Whenever I have perform the update all my USB ports stop working.  My motherboard is a I have an ASUS P8Z68-V Pro/Gen3.  I put updated to the latest BIOS and drivers for everything I have (except the X - Fi Titanium, which has no updated drivers).

    I went through a comprehensive process of elimination to try to find if it is a driver issue, and it appears not to be.  The problem is definitely related to the KB2756872.  Whenever he moved, the USB ports stop working.  I have to perform a restore to the restore point previous to make it work again (I get good here now).
    Help, please!

    I have an asus p8p67. In my case, I can solve the problem in accessing the BIOS and telling the computer to start from the "windows boot manager" instead of my main hard drive.

  • Projector not recognized by Windows when it is connected to the DVI port

    I have a projector with a HDMI input. I ran a cable my video card from the pc Windows Vista from the exit to the my projector DVI HDMI input. Windows does not recognize what it and the projector wont recognize that there is a signal output on DVI-d port. I plugged my regular LCD monitor in the local port, and it works very well. The problem is that for my regular LCD monitor, I want to use the RGB and DVI connection for my projector. Can anyone help?

    Hi Mauriceyo,

    Thanks for posting your query in the Microsoft Community Forums.

    I understand from the description of the problem, you have problems connecting the projector on Windows 7 computer. We're here to help and guide you in the right direction.

    I suggest to download and install the latest drivers from the chipset manufacturer's Web site and install it on the computer:
    Update driver that does not work properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Try the following steps:

    (a) open the window customization by right click on the blank desktop and choose "Customize".

    (b) in the to do list click the link "to connect to a projector or other external display.

    (c) the Windows Mobility Center displays, presentation settings box click the Activate button to turn on the projector

    (d) now your screen will be displayed on the projection screen on the big screen as well as your own computer screen

    (e) If you want to change the presentation options click the icon projector inside the box of presentation settings

    (f) the presentation settings Windows appears, if you have turned on the projector, that 'that I am currently giving a presentation' is checked

    (g) when you're giving a presentation your computer stay awake and notification system are turned off by default, the screen saver is disabled

    (h) you can also adjust the volume of system to show different wallpapera in that you usually use, then the presentation ends and you turn off the projector returns regular your wallpapers

    (i) If you are not sure what are connected click on the button "Connected displays...". "on the bottom of the existing window

    It will be useful.

    Let us know if you encounter problems under Windows in the future. We will be happy to help you.

Maybe you are looking for

  • How can I reset right click search for Bing to Google?

    For some reason a few months ago my right click search replaced by Bing Google. How can I change this back? I'm on a Mac OS 10.4.11 and Firefox 3.6.25. I got a little above my head and I tried two things, one to an article here that says. Change the

  • I have a HP officejet Pro 8500 a Premium all-in-one. It works great except for scanning.

    When I scan the docs come out with several MB in size.  I reduced the resolution of 300 DPI to 200 dpi and even smaller, but the docs are still very large.  I'm missing something here on the possibility to scan to a more normal size.  I also have a H

  • Re-install an application

    Hello I am brand new here & totally new to the thinkpad (I just it), so please be nice... I installed an app yesterday and then uninstalled. Now I want to re install, but just can't find a way to do it-please help! I should add that I have not delete

  • Windows xp monitor does not display the background image

    My windows xp screen does not show the background image. Started when I changed the photos there twice. Now, the background image is only 1/4 of the image on the left 1/4 of the screen. The rest is white for 3/4 on the right side. Other images, all j

  • System disable - password please?

    I get a message that says: Disable System and my # is 80518507 key Can someone help me understand the access code to it?