my keyboard mouse on my Toshiba satellite C660 laptop will not move. Im having to use my wireless mouse.

Similar Questions

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Disk mode "Legacy IDE" on Toshiba Satellite C660-108

  How to set the drive mode BIOS "Legacy IDE" on a Toshiba Satellite C660-108?

  In the BIOS, you can change this option: you can find the mode AHCI (SATA) or compatible (IDE)

• I have a Toshiba Satellite C660-212, I need more RAM

  I have a Toshiba Satellite C660-212 I need more RAM but can't find this C660-212 number, can I use the closest number.

  Go here and use their memory scanner and it will tell you what you need.

  http://www.crucial.com/

• Satellite C660-268 does not start, no start screen

  My laptop Toshiba Satellite C660-268 was installing updates, then it froze for half an hour, I decided to force quit by pressing the power button.

  I tried power, portable could not wake up, I can hear the fan but screen is not black, no post/splash screen (Bios screen), turn on the led goes for a few seconds and then turn off. I tried to press the important function, but nothing could make my laptop boot or stay on. Please,

  I need your help in order to remake my boot laptop

  I think that some of the material died during update installation.
  From my point of few, it was simply bad luck that this error occurred during the update of the system.

  There is only one real solution: the troublemaker should be found and replaced.

  Theoretically, this issue can result from memory problems, but also the failure of the motherboard. The RAM modules are not very expensive and where the RAM is faulty, the fix is not a big problem.

  But in case of malfunction of the motherboard, the laptop repair could be a very costly affair.

  What could be the next step?
  I think if you have no experience of mainframe, you should seek some professional help and assistance.

• Satellite C660 - 217 Wndows 7-149 gb data (D) used

  I have restored my Toshiba Satellite C660-217, Wndows 7 laptop to the default value of the plant, but when I checked in the folder of the computer, the data (D) space (149 GB) serves all upward. When I checked the individual files in data (D), it does not add up to 149 GB.

  I was wondering why this is and can I do?
  Thank you.

  Hello

  As I m not wrong not the laptop was equipped with a 320 GB HARD drive.
  I guess it has been partitioned and three partitions are available (a very small partition is hidden and contains the files of Windows 7 repair)
  The other two partitions, C and D are visible.

  The C partition has been formatted before installation of the system. The D partition is not affected if you use HARD drive recovery option. In case you have used the recovery disk, partition D should be formatted to and recovery files would be saved once again.

• My Satellite C660-1UJ does not start

  Hello people,

  My laptop Toshiba Satellite * c660-1uj starts up.

  It does nothing when I press the powerbutton.
  When I connect the poweradapter I hear a clicking sound, as it is with or without the battery and I also see the light (led) battery flashes green.

  I think it has something to do with my motherboard, but I'm not sure.

  I would like to be sure before you buy a new.
  Does anyone know where the problem is and how to fix it?

  Thanks in advance.

  Kind regards

  Sjoerd

  > I think it has something to do with my motherboard, but I don't know.
  Yes, I think that this problem could be related to problems of motherboard.
  But this would be the worst case, given that the new motherboard is very expensive part I gues guarantee is not valid?

  But why you put the memory t-test? Faulty RAM memory may prevent startup laptop and power. Replace the RAM module is not very difficult.

  Of course, you would need to buy new modules for verification, but maybe you could visit some technicians computer/laptop to downtown who could test the device with new RAM modules.
  In this case it would be pointless to buy the parts for testing purposes only.

• Satellite C660/C660D starts not (black screen)

  So this morning after having attempted to power my Toshiba Satellite C660/C660D upward I met up with a black screen.

  The power lights both work and light, fans the vortex when I turn on but nothing ever comes on the screen, I was wondering if someone could help here?

  It is less than 3 months.

  To be honest I really don t know how to help you.
  Remove the battery, leave the laptop for a while and try to start the laptop with AC power only. Try to do several times with or without battery. If nothing is done it must be a hardware problem, so I recommend you contact Toshiba service and ask for help.

  Guarantee is valid, then there is no reason to worry about this.

• I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  Hello George,.

  I could not find this model number on the Toshiba site, so I suggest that you look at this page as a place to start your search: http://support.toshiba.com/drivers . They had a driver for a webcam, which is perhaps what you are missing. But in all cases, the Toshiba site is where you are most likely to solve the problem with the help of your webcam.

  Let me know if this helps you.

  Kind regards

  BearPup

• Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

  Hello

  I am struggling with the display of 3D on a 3d ready projector emachines V700.
  I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

  CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

  On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

  The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

  The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
  It shows 3D blu ray than 2D and 3D button is grayed out.

  I have:
  Toshiba Satellite Pro P875
  HDMI cable
  EMachines V700
  Shutter 3D glasses: Hi Pro shock

  Hello

  From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

  http://www.nvidia.co.UK/object/3D-vision-main-UK.html

  As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

  In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

• Satellite L870-165 does not work after having been repaired by their service

  Warranty Toshiba Laptop does not work after having been repaired by their service twice.
  Model: Satellite L870-165

  Computer does not start, rest with black screen showing: No bootable device - please restart your system

  After restarting the same thing happening again.
  I called incident phone Toshiba and after trying several options, I said take it for repair service.
  Told me first of all it was the hard drive, then called me to indicate this resettlement and ultimately it was the motherboard, what would have changed. The next day, being chosen computer repair returned to give exactly the same mistake, due to a malfunction only one night.

  After another call to 902 Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I arrived home the computer does not start only once, again gives the same error.

  I think this team comes with a default factory that his solution is not easy, because even the technical service told me I didn't know what to do with it.

  Sorry to hear all this. Unfortunately, we can not help you much so try please clarify this service. They help you with your laptop even if all must be exchanged.
  > Warranty Toshiba does not work after having been repaired by their service
  To be honest I don t understand this sentence. How old is your laptop? warranty is already expired?

• my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  Hi dove2k,

   

  Welcome to Microsoft Answers Forums.

  You will need to enable the touchpad on the laptop itself.

  Find the area of the touch pad, you will find a button to enable or disable the touchpad.

  If the step above doesn't, try this step.

  Go to control panel > mouse > device settings tab
  Click (or to disable)

  

  Notes:
  On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
  You can click on Reset device if none of these solutions work.

  If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.