My laptop came with Windows 7 Home premium 64-bit

Similar Questions

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• Cisco VPN Client with Windows 7 Home Premium 64-bit

  I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

  Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

  Any suggestion would be appreciated.

  Hello

  You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

  Thank you

  John

• How to upgrade the graphics card drivers sony vaio laptop computer vpceb45fg Windows 7 home premium 64-bit?

  How can I update the graphic card drivers in sony vaio vpceb45fg laptop Windows 7 Home premium 64-bit runningt?

  Hi simran1976,

  Use the link below to download and install the video drivers:

  http://www.Sony.co.in/support/product/VPCEB45FG#

  http://www.Sony.co.in/support/product/VPCEB45FG#

  If my post answered your question, please mark it as an "accepted Solution".

• Update for my laptop Inspiron 1525 Windows Vista Home Premium 32-bit to Windows 7 or 8, then at 10 Windows

  Hello

  I searched for a solution upgrade my Inspiron 1525 notebook, pre-installed with Vista Home Premium 32-bit when I bought it.
  The goal is to prepare the way for upgrade to Windows 10.
  I need to start with Windows 7 or 8.

  I couldn't find a way on the Dell Web site.

  Thanks in advance!
  Isabelle

  Hello

  Please write to us!

  We would like to inform you that the Inspiron 1525 has not been tested for windows 10 and we do not suggest that you upgrade to the version of windows

  Nicely private message the service tag and your email address.

  Thank you

  Robin

• Activation problem with Windows Vista Home Premium 64-bit edition

  Recently, I had a problem with my office that was running Windows Xp Pro.   After having tried to reformat the computer with my installation disc, something was holding me back upwards.  Thus, recently bought a laptop with Windows vista on it I used the disc that comes with it.  Note: I ordered this laptop for Windows 7, vista is no longer running on this laptop.  Everything installed very well on my office with the exception of one problem it won't let me activate windows.  Now, it's my copy of windows vista that I paid for.  It runs on a single computer in my office.  I have validated my software on my desktop and it's been validated.  Now why not activate Windows Vista?

  If Vista is preinstalled on your laptop, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• HP laptop with Windows Vista Home Premium (32 bit)

  I believe I bought this laptop in 2007 and have recently had problems with updates for windows that doesn't.  I finally restored the computer to the factory settings, all installed updates, and am trying to install SP2 so that I can maybe be updated IE to 9.0.  Without the 9.0, the browser gives me a message that says that I can't go to Microsoft.com as my browser is obsolete.  My question: I don't want to buy a new computer, if not necessary, then, what do I do?  Try to upgrade windows or how long can I stay with Vista?

  Hello

  You need SP2 as a condition of system for IE9.

  Sort service packs, then download IE9.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@

  https://www.Microsoft.com/en-us/download/Internet-Explorer-9-details.aspx

  It is support from Microsoft for Vista SP2 until 2017.

  See you soon.

• Samsung laptop computer with Windows 7 Home Premium. Scrolling touchpad stopped working with Firefox (but still works with Internet Explorer). I tried to 'restore' to several previous dates, but still does not work. Any ideas?

  Do not use this laptop very often. I had done several updates at once (including the Windows updates and the latest edition of Firefox).

  Check if there is a PDF file open in another tab. My Samsung R580 scrolls the PDF (which was open on another tab) instead of the tab that is currently open.

• I have a HP Pavillion G620012EU laptop with windows 7 Home premium 64-bit

  . I had it for two months and restarted several times and it still restarts fine

  Recently I didn't let the machine till the day the day and the next, I got the error message "no boot device found". If I look in the event viewer, he said "it was an unexpected stop.

  I have service pack with all updates

  It restarts so very well

  If it is only two months, return it for replacement or repair under warranty. Make sure that you back up your files before sending.

• my laptop came with windows media center vista 64-bit, please help to install the same OS that I don't have installation dvd or I restore partion work.

  I bought the laptop United States & the model no is Pavilion dv4-1120us. Pls help me to restore or to get my system back BONES & also let me know if I can upgrade to windows 7 or not, once I am able to recover my original OS.

  Hi Pavan,

  Please answer these questions so that we can properly diagnose the problem, and to help you, as a result.

  1. the operating system does not work properly? What exactly is the problem you are having?

  2 did you receive any disk partition recovery with the computer?

  I suggest you contact HP support to obtain the recovery partition disk and for aid to restore the computer to its factory settings.

  If you want to re - install Windows Vista, check out this link:

  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-in/Windows-Vista/installing-and-reinstalling-Windows-Vista

  If you want to upgrade to Windows 7, see these articles:

  Upgrading to Windows 7
  http://Windows.Microsoft.com/is-is/Windows7/products/upgrade

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  Please get back to us with the results.

   

  If you have questions about Windows operating systems, help us on this forum. We are happy to help you.

• Installation failed for HP Photosmart C6180 wireless for my laptop HP Pavilion (window Vista Home Premium) 64-bit

  Hello

  I have HP Photosmart C6180 all-in-One printer, that works well with my other Compaq Presario SR2001NX desktop (Window XP) wired without any problem.
  But after I bought the new laptop about a month ago, I tried to install this printer on my wireless laptop.
  I downloaded HP driver for vista 64-bit, which is not always in the final phase of installation showing big 'X' mark on the screen of the window.
  Several chatting online with HP technician did not work at all, and I couldn't connect the printer with that laptop apparently more up-to-date, which is quite frustrating.
  I know how to connect the printer wireless with router. The printer screen shows it is correctly connected to the Wi - Fi network.

  I wonder if Microsoft already knows this kind of installation problems.

  It seems that Windows does not install automatic blower for this printer. Most of the HP printers is listed on the function of automatic installation of the window, but this printer is not included.

  Hello Itnntkim,

  Thanks for posting of Microsoft Answers.

  I checked on the compatibility of Windows Vista site and this printer is compatible with the 64-bit system, but it shows there is a required download for the drivers. I've included here the compatibility site.
  http://www.microsoft.com/windows/compatibility/Details.aspx?type=Hardware&p=PhotoSmart%20C6180%2032%2f31ppm%204800x1200dpi%20Print%2fCopy%2fScan%2fFax%20NIC%20U&v=HP&uid=Q8181AABA&pf=0&pi=0&s=HP%20PhotoSmart%20C6180%20all-in-one%20multifunction&os=32-bit

  Make sure that you have all the updated drivers for the HP Photosmart C6180 all-in-One printer.
  The website below is for drivers for this model for Windows Vista 64-bit system.
  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&cc=us&DLC=en&product=1153494&lang=en

  We have downloaded the drivers, then uninstall the drivers you currently have. And then update with the new drivers.  If when you do that, you still get an error, please answer with the exact error message so that we can continue to troubleshoot with you.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I have a sony vaio cs series with windows vista home premium 64-bit.

  any help is appreciated very much!

  There is a problem with my laptop screen
  inside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.
  the line is a reflection of the top part of my screen.
  for example, now I have my mozilla open, then the line down flashes the upper part of a mozilla window.
  I tried print screen to show the line. but the screenshot won't capture it.
  Help, please! It's very distracting... There is a problem with my graphics card?
  my laptop isn't even that old (3 months)
  Thank you very much for reading!

  It is still under warranty.  Talk to Sony, it looks like a graphics problem.  They will have to replace the motherboard if the graphic chipset is integrated.

• version of directx for emachine with windows 7 Home premium 64-bit

  I have an emachine windows 7 64 bit with processor intel pentium E5800, hard disk of 1 TB, multi-in-1 card reader and is EL1852-52W and intel GMA X 4500 grafics. What version of directx should install for everyday use best game and general?

  Win7 has three versions of Direct X 9, 10 and 11, but there isn't any files when it
  moved first, if you run Web X Direct Setup to update DX.

  Download details: DirectX end-user performance

  The intel GMA X 4500 integrated graphics is, OK to use in video and on a daily basis, but unfortunately
  not suitable for games more basic graph.

  GMA X4500MHD benchmarks

  Note that less than 30 fps frame rates are undesirable and below 20 fps are usually unplayable.
  .

• Adobe Flash Player 10.3 does not work on my computer - HP with windows Vista Home Premium 32 bit and Internet Explorer 9.0 32-bit

  When I load Adobe Flash Player 10.3 he says he has successfully installed, but if you go in Panel, programs and features, it shows Adobe Flash Player 10 Active x, the date of installation, but the size of the file is empty. Also in the internet Options tag program, manage add-ons, as it does not appear. I removed Adobe Flash player and tried to download again - same results.

  Hello
  • What were the changes made before the show?
  • How long have you been faced with this problem?
  You can check this link:
  
  http://kb2.Adobe.com/CPS/191/tn_19166.html
   

• G72-250US notebook PC product #WQ666UA with Windows 7 Home Premium 64-bit

  I have a HDMI port is not working.  Any suggestions?

  You will probably need to uninstall your video drivers (graphics card), reboot, then reinstall them using the HP Recovery Manager link in your programs all the.