my laptop does not start and gives me the error, load the required DLLs for kernal

Similar Questions

• I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now my Photoshop does not start and gives me a messa

  I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @

  You must click on this link 150:30 blue and start with message 11.

  Don't forget to leave a space after sudo python before submitting the script.

  Remember that you will not see your password when you enter it when calling to make.

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Firefox 11.0/12.0 does not start and gives no error message, how do I fix? Windows 7/8

  Running Windows 7 on one partition and Windows 8 Preview of consumption on the other, Firefox does not open for either.
  Firefox crashes when opening without error message. I reinstalled and deleted manually the profile information. If I create a new profile, it works up until I got close and try to restart I have to make a new profile.
  I tried removing/reinstalling java as well (in case), which I had been to some of the java edition of my Windows 7 partition installation.

  As I run Firefox, if I look at the Task Manager, Firefox.exe appears for a moment, but disappears almost immediately.
  No files appear in the directory "C:\Users\[Username]\AppData\Roaming\Mozilla\Firefox\Crash reports" with the exception of the file "InstallTime."

  • The information posted in the "Troubleshooting information" section below comes from the partition of Windows 8 Preview of consumer. There are errors with my display not updated correctly, driver - Firefox was working on Windows 8 Preview of consumption until recently, so I guess that it is not part of the question.

  Why not instead to downgrade a Firefox exist for earlier versions, consider trying several installs.

  Portable Firefox is designed as an easy to install using Firefox as a browser extra process.

  • He's probably still available in versions http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released

  Familiar with your facility manually several versions of Firefox will be easier, simply use separate unique profiles for each version. Use the built in the Profile Manager or the standalone version to help you. These tests do not require all other partitions and must do not include changes to the firefox installs and existing profiles.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox#Using_new_profiles_in_secondary_Firefox_installations
  • http://KB.mozillazine.org/Profile_Manager
  • https://developer.Mozilla.org/en/Profile_Manager (standalone app)

• I updated firefox 3.6.10 to 3.6.11 and rebooted... when back connected in firefox does not start and gives an error saying 1.9.10 aren't compatible wth 1.9.11

  This is the full error message
  "Error: platform version ' 1.9.2.10 ' is not compatible with
  minVersion > = 1.9.2.11
  maxVersion < = 1.9.2.11

  Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.

  Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  
  Do not remove personal data during the uninstallation.

  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  You can skip the step to create a new profile, which is not required on this issue.

  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Tecra S1 does not start and hangs at the splash screen (boot)

  Tecra S1 model PT831E-107EQ-GR

  Problems started a month ago. Randomly, he didn't not started. After some power or off attempts it finally started and worked properly. I bought a new hard drive (Toshiba 40 GB) because it happened more often. I got Acronis True Image and planned to clone a disk to the new disk. The problem is that a cell phone now won't start any more so I can't boot from a CD or hard drive. It stops at the logo 'In Touch... "with text" Press [F12] for boot device selection menu ' and does not react any key. I tried to boot with no CD, no disk hard - the same thing. I also connected internal HD using ATA to USB adapter - even. This means that it is not a disk problem but motherboard, or other components? Is it possible to get into the BIOS before boot selection screen?

  Kind regards
  Jacek

  Hello Jacek

  Try to enter the BIOS to ESC settings initially upwards.
  The question is strange and I do not think that anyone here can offer the exact diagnosis. The fact is, you can use multiple bootable devices but if there is something wrong with the motherboard HARD drive CD/DVD doesn't work. CD/DVD or HARD disk controller is maybe defective.

• HP G60-126NR: laptop does not start unless that removed the CMOS battery

  I have a HP G60-126NR laptop. One day she was cold stone when I press the power button / stop. I unloaded the mothboard.  I then installed a new CMOS battery. I use the power supply to the power supply adapter. When I press the power button, I get nothing toally dead, except to show the light of connection. If I remove the CMOS battery, then discharge the motherboard again, then plug in, and the portable lights without power button / stop touching and goes into the Configuration screen to access in time. After time, it starts in Windows without a problem. SFC Windows scan shows no errors. If I stop, not sleep, the laptop died again unless I dump the motherboard and start from the square. In addition, I would like to say that when Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite change 'what happens when I close the lid. My diagnosis tells me that it needs a new motherboard.

  PS: I flashed the BIOS off HP site thinking that it would solve my problem, but it has not...

  The problem has been resolved. The jury of ciruit combination touch pad for power and WiFi was broken and has been replaced. Normal unit operation.

• Re: My laptop does not start, it cannot detect the hard drive

  I'm having the same problem but a bit different. I noticed that the support said to replace the hard drive and that's what I did with a disc Windows 8.1 and I took a step after test and see if my hard drive is not really usable. I put it in another computer that is also running Windows 8.1. It worked but my origianl computer still does not work, it says always "no drive detected". What the heck!

  think at this point, the best thing to do for you what we call. It is perhaps that the computer is a little less than a year and is still under warranty. Whatever the case, a technical support professional phone can certainly discuss your options with you.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• OS does not start and screen with the error (root) system32\hal.dll windows is damaged or missing black

  I was trying to stop some HP programs to start when I start my desktop computer. I did the following: start > run > msconfig.  Click on startup and unchecked HP four applications. Restarted my desktop computer and immediately had a black screen with the following message:

  The window could not start because the following file is missing or damaged:

  system32\hal.dll

  Please reinstall a copy of the above file

  I can't do anything in Safe Mode or one of the other options. Cannot re - install Windows XP Home Edition because Windows or Internet Explorer 8 will not run. Only the black screen and the message mentioned above.

  I use a desktop Dell Dimension 8400 computer.

  [1] Just finished everything on your step 10. I went with the Microsoft Security Essentials.

  [2] I still need to download site driver Dell trying to correct this "floppy seek failure pilot 1,2 and 3 not found: ATX, SATA 1, 2 and 3' problem"

  [3] I just got e-mail from Microscoft response that the thread that I created has been deleted, so I answer to you of a past replica.

  Wanted [4] Thank you for your time and patience to help me. Is there something else to do for me, you can recommend?

  A1. Wise move IMHO. The computer seems "snappier" now?

  A2. I can't imagine that another owner of a Dimension 8400 (or 4800?) has not encountered this problem before. Discover (i.e., search) the Dell office equipment forum: http://en.community.dell.com/support-forums/desktop/f/3514.aspx. If necessary, start your own new thread (registration required).

  A3. If you start another thread on the computer, I have posted a reply to this & you asked to publish a follow-up replies to your original thread. [?]

  A4. Welcome & thank you for your comments.

  In fact, there is something else you may need to do: it turns out that KB2607712 is replaced by the KB2616676 in Vista & Win7; Windows XP needs to have both installed [despite the mention you referred in your post on September 14, above] !!!

  => So if Update for Windows XP (KB2607712) is NOT listed in Add/Remove Programs, you will need to manually download/install a revised version [long story, involved - you don't want to know]:

  ~~~~~~~~~~~~~~~
  ACTIONS:

  1. open Internet Explorer to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27244 & click on the button CONTINUE.

  2. after VALIDATION, download the installer for KB2607712 & save it to your desktop - NOT run again!

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #2 above to install the update. Follow all the instructions (reboot required).

  5. check that the Update for Windows XP (KB2607712) is now listed in Add/Remove programs.

  ===============

  PS: If you have NO Office or Silverlight or any installed Windows Live Essentials application, I can tell you how to start your Windows XP computer & full load more quickly.

• Windows Live Photo gallery does not open and gives me the error 0x8007000b

  Windows Photo Gallery does not work, I can't open it and have access to my photos. The error code is 0x80070000b

  No guarantee... but following Microsoft "don't fix" may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

• XP does not start, unable to run the command line for the clean boot

  Hello

  For the last two weeks, I've been unable to boot XP, caused by a virus, I think. I can get into safe mode, but stopped to run antivirus software because I said that I don't have the appropriate privileges. There is no system restore points available, and I think that my computer is too old for me to ask the manufacturer (HP) for an OEM drive.

  Now that I found this forum, I decided to try the suggestion of the thread stickied for a clean boot, but I can't even click on RUN and load the command prompt. I click, but nothing happens. Many programs in safe mode did the same thing for me.

  Is there another way to enter the guest so I can try to get a clean boot? Is there another way to access msconfig? I read here that I can click on F10 to try HP and XP 'factory re - install', but the HP splash screen is no longer, perhaps due to a new card mother MSI, I put a few months ago. Any help?

  If all else fails, I buy a Windows 7 Upgrade disk and which will still work? Or would I need to buy the complete installation of W7 to "clean up" my system?

  Thank you.

  Jacob S.,.
  Thanks for posting with us.  Have you tried to run MSConfig from safe mode?  If the immediate window does not work, you can right click on your taskbar and start the Task Manager.  From there, you can select file > new task > and then type msconfig in the window.

  With respect to obtaining OEM disc, you may be able to buy them from HP, but since you have replaced the motherboard and then the OEM disc probably does not work.  You should check with HP on this one.

  If you buy the upgrade to Windows 7 you can do a clean install, but it should be started from Windows.  You insert the DVD in the drive so that the desktop, and then select the custom Setup to perform a clean installation.  It will validate your XP before you start the installation.

  Now if you think that your PC has a virus (which it sounds like it might) then you can try using a free online virus scan.  You should be able to run one of them without blocking.  Also, make sure that you log on with an administrator account.  Here is a link to a scan online, that you can try, or you can search bing for others that are out there.
  http://OneCare.live.com/site/en-us/default.htm Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop does not start and the sources of LED lights blink

  1. number and product name

  Product name: HP Pavilion dv4-2140 us mobile entertainment

  Product number: WA888UA #ABA

  2 operating system installed

  Windows 7 64 bit

  3. error message

  n/a

  4. all changes made to your system until the problem occurred

  None. I use it only in some browser games / flash games on facebook.

  I use it just to browse in facebook and had a few facebook games before I SLEEP.

  And when I woke up this morning, the laptop won't boot anymore.

  * There are two LED flashes continuously.

  Done the following (as suggested in the HP website):

  Hard Eman

  The reinstallation of the memory module

  Clean the dust (with compressed air

  Thank you

  This widget could not be displayed.

• HP Dv6 6 c 50: laptop does not start after interruption of the upgrade of windows 10

  I was upgrading my system Windows 10 free upgrade offered by Microsoft. After completing the download of the system has been installed. When close to 50% of the installation is complete the computer turns off because the battery has been cut. "When I connected on the power of the screen said" back to your previous version of windows. Then a message popped up that PC start up failed and u first "Startup Repair". I went for the option and a widow open saying: "Startup Repair is checking your system for problems... Attempt to repair ". This is the case for the last many hours and there is no progress. If I have to cancel it is said that Startup Repair cannot be cancelled. Please can someone tell me what I'll do. I created back to the top of one of my data.

  Thanks in advance

  Hi @Faiza1,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Pavilion Notebook dv6-6c50se and the system failed on Windows 10 upgrade. Here is a link to perform a HP for Windows 7 system recovery. In this document, it shows you the screen I need immediate help, this section, use the Microsoft System Restore.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Please let me know how it goes.

  Thank you.

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K