my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

Similar Questions

• How to disable the automatic updates of windows and to update on demand

  At the same time, I had disabled the automatic updates of windows and updated on demand by opening windows update.  Where is the place to activate and deactivate the automatic updates of windows.

  It worked.  Thank you!

  I wasn't able to get automatic updates to download a microsoft windows update.  The fix for microsoft in default mode indicated that he needed to be repaired and that fixed it.  When windows update was used again the update has failed once again.  The fix even that it was then run in aggressive mode and with a recheck has failed to correct the problem.  At each restart, automatic updates took the time to start producing a yellow shield and then pop-up reminders.  So thank you to help us with these questions to disable the automatic updates of windows.

  Thanks for posting the results of your efforts, I don't know they will be read and appreciated.

  UTC/GMT is 15:27 on Thursday, October 6, 2011

• My computer installs the automatic updates for Vista Home Premium, but fails to set them up.

  original title: Microsoft updates

  My computer installs the automatic updates for Vista Home Premium, but fails to set them up. I'll through in circles, trying to figure out what the problem is. Everything was fine until a week ago. Help please

  Thanks for trying to help. It was too complicated for me to fix, so to get help in. happy to say now, all right.

• I updated my computer and after that my news feed on Facebook mobile will not appear. Help!

  I've updated my Javascript and after that, I lost my facebook newsfeed. How can I get that back?

  Hello

  Access Facebook from a computer or device that took place (mobile phone) of hand?

  If the problem is specific Facebook News feed, then I suggest you to send your request to:

  http://www.Facebook.com/help/

  http://www.Facebook.com/help/mobiletexts

  If you are using Windows mobile, then you can also post your query to:

  http://answers.Microsoft.com/en-us/WinPhone/Forum

  Hope this helps and keep us posted.

• I can't turn on the automatic updates give me a message that the Security Center could not change the Automatic Updates settings. Please help me...

  Automatic updates not turn off why, I already scanned my computer for viruses and found nothing, I have already install service Pack 3 and did not work. I turn on manually but when I go on the center of Panel and the security of the control still appears off the coast.

  Maybe try the Microsoft Fix It solution found on this page http://support.microsoft.com/kb/971058

• The automatic update Windows Vista just eliminated all my files on my hard drive

  Last night, I closed my laptop with the ability to install the business Windows vista update (as I usually do when there are updates available).

  When I turned on the laptop this morning (May 17, 2013), he went through the usual update and installation.

  However, when it finished I noticed that the Office was clean (not so many icons on the screen). Then, I went into Firefox and noticed that all my favorites have disappeared - I imagine the same for Internet Explorer and Opera too (although I haven't checked). Then, I went into My Documents and noticed nothing - all my files on my hard drive (with the exception of programs and software dreamweaver for example microsoft, office, etc) were totally wiped out.

  It is serious - help!

  Fortunately, you can restore all your data files from backups that you do on a regular basis.

• How to regain possession of the file on my Vista PC after that it has been hijacked by my Windows laptop, 8...

  I plugged my external drive to backup on a laptop Windows8 and Windows8 cell phone apparently took possession of the file that I accessed from the external drive.  Now I can't access this file from my Vista PC.  He tells me that I don't have permission to access the file, even though my account is administrative and the file was written from Vista computer!

  Help!  These are image files and as a photographer, I need to access the files on the hard drive on my Vista computer!

  Type in the start - Help and Support

  appropriators

  I installed a new version of Windows and now I can't open a file.

  This problem may occur because some of your user account information has changed, even though your user name and password have not changed. You may be able to solve the problem by taking possession of the record.

  To take ownership of a folder

  1. Right click on the folder that you want to take control and then click Properties.

  2. Click the Security tab, click Advanced, and then click the owner tab.

  3. Click on change.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Click on the name of the person you want to give to the property.

  5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  6. Click OK.

  What help does not say, it is after taking possession, that you actually need to give yourself permissions to access the files. Use the permissions , rather than the owner above tab tab.

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• I get the Windows Update error 8024402C error after that reinstall full of Windows 8 on my laptop HP-have tried everything

  It keeps giving me this error: the system is to reinstall a totally new - the first thing I did was to go to windows update and this is the error I get.

  Have disabled virus and firewall, and does not use a proxy server. Have tried most of the suggestions but no use. Have reinstalled windows three times with the same problem. Never had a problem before. Please help if you have any ideas.

  http://Support2.Microsoft.com/kb/971058/en-us

  How to reset the Windows Update components?

  If the fixit does not work, refer to the manual procedure.

• How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

  Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

  With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

  Download & install, create copy, send a copy to the other pc to share its use.

• Only when I try to connect to the hotmail Web site, internet explore said that he can not access the Web site?

  I was able to access hotmail account every day except today I tried several times to connect to the site on the Web page, but internet Explorer comes up with the error message that it cannot connect to the Web site.  I tried a diagnostic check on my end, and nothing seems to be wrong.  I can access other Web sites.  I tried the suggested methods to clear my browser which has been online on the microsoft answers site.  Nothing has done so far.

  Status of Hotmail:
  https://status.live.com/detail/Hotmail

  For now, it is said there is a problem:
  "Hotmail is having connection problems. You might see an error message when you try to connect. »

  You can try to check your email at a later date.

  For the taking in charge of Hotmail:

  http://windowslivehelp.com/product.aspx?ProductID=1

• I enabled MapsGL to the Google page and after that I can't watch the cards without that Firefox does not

  I can't disable Google MapsGL before closing

  Described in http://maps.google.com/support/bin/answer.py?answer=1630790

  «.. . visiting http://maps.google.com/?vector=0. If you use a different domain, replace .com with your current domain name. »

• I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?

  I bought a new laptop with Windows 7 installed.  Whenever I restart it, it has installed updates which can take up to an hour or freezes.  You can ignore the automatic updates of Windows 7?

  You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need to know how stop the automatic updates, secondly how do I substitute him "you can't run this program on this pc?

  First of all, I need to know how to stop the automatic updates, second how to replace him "you can't run this program on this pc?  I SWEAR THAT IF HE SAID THAT HE AGAIN THAT I WILL BREAK IT INTO PIECES. Then I'll go buy an android tablet.  Surface, hate hate 8

  Yes running of programs that are not on the store is not possible. It is not a parameter or artificial, it's just that the RT line uses what is called an ARM chipset, also known as RISC (Reduced Instruction Set Chip).  Literally, he cannot read the compiled code of complete programs.  Same reason you can't run Adobe Photoshop on an iPhone, just CPU cannot decode the program.  But on the good side of things, it cannot launch virus either, so he made the first version of Windows that cannot get 'gunked up' over time. It works like an iPad and have a continuous and consistent performance for a lifetime. I'm sad that they abandoned it so fast, I know a lot of people who could use this service.

  Anyway, you can skip the connection at startup.  There is in fact in two ways.  Unless you do a lot of "full stops", I recommend enter Power Options and setting by turning off the "password required when you wake up sleep."  Which will remove the requirement for password of sleep/wake, but if the device never complete a boot will always be a password.  This is a good compromise for safety and security, so if the device is lost or stolen, it eventually crashes when the battery is dead.

  But if you want to delete this, you should be able to do it by running the command NETPLWIZ, as described here: https://www.youtube.com/watch?v=sOYmY-6Wd3Y

• Automatic update of Vista SP2 won't let windows not load? !! 0xC0000102! 3125/4933 (inkwatson.exe) this is where its decisions

  My Vista Home Basic which is pre installed on my Asus laptop computer did an automatic update to SP2 and then ask to reboot the computer, now I can not start vista it stops to! 0xC0000102! 3125/4933 (Inkwatson.exe). I tried to boot into safe mode (each of them listed) and cannot it stops at Loaded:\windows\system32\drivers\crcdisk.sys. I even tried to use my recovery disc but nothing comes even after pressing F9 only said memory and windows vista boot check in the Tools section... someone can tell me what to do
  I want to reformat the system but can no longer Hat
  Thnks in advance

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, , but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or repost in the Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or you can try this:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here's the General information regarding the use of the recovery disk:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then restart with the recovery in the drive disc.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  See you soon.

  Mick Murphy - Microsoft partner