My laptop is connected to local and internet when I use the wired ethernet connection to the router. I can't connect to the network this same router wirelessly.

Similar Questions

• Internet connection is lost in computer laptop and Xbox when I fill the network.

  Original title: the network bridge is being gay

  well IM one of the problems with my network bridge that I connected to my card built into my laptop and im for my throu xbox wireless bridge the LAN, and unless he is satisfied, I have internet but when I fill my connections he said: no internet access and I can not access the internet on my laptop and now my habit of Wi - Fi allow me to connect to what anyone I don't have the shared option on check and my connection is really horribly slow and its never been this slow before

  Hello
   
  1. when the question is is produced?
  
  2. you remember of any changes to your machine before the question?
   
  I would like you to follow the steps mentioned below
   
  Step 1:
   
  Instead of bridge, you should be able to share the connection from your laptop.
   
  a. Click Start, click Control Panel
  b. go to your network and sharing Center.
  c. on the left side, click on manage network connections.
  d. right click on your wireless network adapter, click Properties, click the sharing tab, mark the tab to share this connection
  e. click on apply, then try to connect to xbox with your ethernet cable, either incidentally, it must be a crossover cable in order to function.
   
  Step 2:
   
  Disable all security software temporarily and see if the problem still occurs.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• No internet when you use the Ethernet on WRT54G port

  Router worked OK in hours, but in / op later that day. Ethernet light works when it is plugged in it, but not of the internet on the desktop computer. Get free WiFi on laptop. Unplugged Ethernet port to #2 and can get internet. The parameters seem to be the same, but I'm not an expert, so who knows what happened. Tried rebooting, turning all power off and went to brouser 192.168.1.1 page to see if something has changed. Also, the USB connected to my Tivo shows a signal but is more connected to the network. Any ideas? I have Windows XP. Also I have updated drivers WRT54G after that was the problem.

  The computer has an active PPPoE connection. Connect directly to the internet without going through the WRT via ethernet or because connection that your modem has a USB port added through which your computer connects to the internet, effectively blocking any other connection.

  You must cancel the PPPoE connection. Select "Internet Options" in the control panel. Tab connections make sure you select "do not establish connection" (below the list of configured connections). OK the change. Then, disconnect your connection PPPoE ("Centurynet") in the network connections Panel.

  After you have disconnected the PPPoE connection, you should be able to connect again to http://192.168.1.1/. Your router must also be able to connect with PPPoE now. Check on the status page. If necessary, press Connect. It should if you have correctly configured your router to your PPPoE connection.

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• How can we change the text and fonts when you use the feature "painting".

  I use the "feature of the paint to the text of the announcement for the pictures, but I can't understand how to change the size of the text or characters.» The 'help' in the painting says that you can do both, but they don't say HOW! Help?

  Hi PTWG,.

  If your using Vista or XP while in the painting after that you drag the text window will come the possibility to change the font and size. If you do not see this option click on view and be sure there is a check box in the text toolbar.

  Does this solve your problem?

• Wavy vertical lines distort up and down when I use the scale to the size of the frame in CS6

  In recent days, while I import images HD to SD comp and use the scale to the size of the image now I have these wavy vertical lines at the bottom and the top (instead of black). I have a problem when images are suspended, when I play it's ok, and also the problem appears when I export images. I have to reduce my images manually in some 62% and then it's just the way it should be.

  See the image below (to LEFT - when I read my clip, RIGHT - when it is paused)

  

  This bug should be fixed in the next version of NVIDIA. Try to restore the previous version of the driver.

  Peter Garaway

  Adobe

  Premiere Pro

• How to set the user name and password when you use the class for SOCKS5 Proxy?

  Hi all
  
  I use the proxy class for SOCKS5, so need to set the user name and password, I can't find where I put the value. If the API support.
  
  Thanks in advance!

  Exactly how to repeat the question five times ater, we told you the answer would erase anything? A: this isn't. This irritates just the hell out of people. Irritating the hell of those who's trying to help you is not rational behavior either.

  I have no idea on the support of third-party for transmission by proxy via NIO.

• How to escape the quotes and commas when you use the command of the coil

  I am creating a file .cvs with data in my database. I call the function of coil and below select stmt
  
  ' Select ' ' ' | ID | '","' || name | '","' || Description | '","'
  
  I want everything to be separated by quotes and commas. Description data can have quotes and commas so how I get away from them in my queue code so that when I use SQL Loader data will get entries in the database correctly.
  
  Thank you!

  Hello

  If the field is closed, so there is nothing else you need to do for the column separator (en).

  To use the character encompassing ("") in the field, double it, the same way you use two single quotation marks to signify a single_quote into a SQL string literal:
  {code}
  ' SELECT ' ' ' | ID
  ||     '","'     || name
  ||     '","'     || REPLACE (description
  , '"'
  , '""'
  )
  ||     '"'
  FROM table_x;

• Is it possible to create a Local administrator user when you use the Profile Manager to get the configuration settings

  Hello

  We are studying the use of the Profile Manager of OS X as a way to manage our Enterprise macs.

  One of the demands made by the team, is to create an administrator user, as part of the OS X Profile which is lowered to the customer. The rationale is that this would be a way for the it team get, if the fubar user had their Mac

  I did not see this anywhere in the configuration options of the Profile Manager and so ask the people who use it as part of their everyday Toolbox, to find out if such an option is available.

  Thank you and best regards,

  Madan failed

  No, not with the Profile Manager.

  How you deploying your company Mac?  As institutionally imagery or as BYOD devices?  If image, then the image should contain a coherent local administrator account.  If the active image also the Apple Remote Desktop or SSH, you have a method of mass, control and manage the devices.  If BYOD style, then you are out of luck that the end user is the only one with the key of the device.

  You can take a look at following JAMF Casper.  Once devices are registered, you have the possibility to create accounts (However the common method is to create an account on registration).  If you deploy a BYOD approach, you should also look into DEP program Apple (https://deploy.apple.com) as more DEP JAMF (or other MDM) is a very powerful tool for light to zero touch deployment of systems.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Laptop crashes when you use the CD player

  A few days ago my laptop started occasionally crashing and restarting when I use the CD player. He only made 2 or 3 times but I've seen this happen with a previous (non-toshiba) laptop and it ended up happening all the time, even when not using the CD player.

  Is this due to overheating? Is that what I can do to sort without having to send it for repair?

  Thank you!

  What computer Toshiba laptop do you have exactly?

  Have you tested if this strange question would pass after the installation of the new OS from the Toshiba Recovery CD?
  I think that this should be done to make sure if this question isn't related software

  If this issue always happen after using recover CD, then you must contact the ASP in your country for a control of the laptop.
  Possibly defective equipment could be responsible for these accidents

  Greetings and good luck

• DB restoration and recovery when you use followed the change block

  Does anyone know of a document that explains the restoration of the database and recovery when you use the block and the incremental backups the track changes? I understand how to turn the OTC market, and how it can shorten the time to do an incremental backup. I need advice when choosing the frequency of backups of 1-0 and level level and how it affects my food options. I also need to decide if the level 1 backups update the copy of most recent data on the disk file.
  
  If the copy of the data on disk file is updated by each level 01:00 am I right to say that I can restore to point in time that this moment occurs after level 1 has been taken? If so, then maybe I don't have level 1 update the copy of the data file on disk. If I take a level 0 Sunday and daily level 1 Monday - Saturday, so I think I can restore to any point in time after the 0 level.
  
  A lot of documentation explains my backup options, but there is less material tell how my backup choice affects my food options.
  
  
  Thank you
  Bill

  BCT applies to backups only, there is no connection with the restoration.
  I think you are confused about the difference between

  (1) incremental of backups
  and
  (2) "normal incremental backups".

  In the first case (see http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmbckba.htm#CHDEHBFF), in the base implementation because an incremental backup is applied to a still image copies and you cannot go back to an earlier point in time – before the changes applied.

  'Normal' incremental backups are done after a full backup (level 0), you can return to the level 0 backup earlier.
  RMAN follows rules of detention, in the basic version of an incremental backup that is updated, you have a retention of redundancy policy 1. This means that a full backup (image of copies, which are updated by the incremental backups again and again) is available.
  Backup incremental 'Normal' in most cases after a few days recovery windows - a time window.

  Werner

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite P300: switch from Internet access to local and internet

  Hello

  I Sat P300 and zet 3 usb allows you to connect to the internet.
  But for some unknown reason, the access pass to local access only and return to the local and internet.
  This can happen every 2 minutes or sometimes not at all.

  I checked the firewall and all settings for internet and everything as it should.
  Another thing that can help the modem works fine on old pc with xp.
  No problem at all.

  Any help would be great

  > I use the modem on another pc in the House he has xp and works fine no problem at all, only on the laptop using vista do this problem

  Have you asked (Zet) modem manufacturer if certain issues are known under Vista?
  To me, it looks like a Vista <->Zet

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

• When I use the socks proxy in firefox, I can travel only and can not download any file from the internet.

  When I use the socks proxy in firefox, I can only navigate through internet and cannot download any file from the internet.

  I have no problem when using HTTP proxy servers and have no problem managing which connection to internet without proxy.

  I found this problem due to the integration of the browser evolved in the idm software, and when I turn this option off in idm problem will be solved