my laptop is hp 3020ee I update the hard disk of 500 GB to 6 GB patriot ram can I use recovery disk

Similar Questions

• HP 15-F039WM laptop: how to replace or reinstall the hard disk HP 15-F039WM

  The laptop was dropped and detach the hard drive.  Need to reinstall or replace, but this thing is like fort knox!  Can someone explain how to go to the hard drive on this model?

  Your manual:

  Manual

  Page 46

  These videos are for a very similar model and may be useful:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c04324972&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0011

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP G62: I have hp g62 laptop that I need to replace the hard disk but I don't have a lap desk

  I have hp g62 laptop comes with windows 7 Home premium and Microsoft last year offered 10 edition windows Home premium.
  Suddenly the windows closed was a message "hard drive does not exist" or "boot device not found", said another time.
  I need to replace in the old hdd but I don't have a lap desk. The recovery file was recorded in a single partition on the old hard drive.
  How to get started with the new hard drive and recover the old windows, I need help please thank you.
  
  Concerning

  computer laptop laptops installed new hard drive there is message "no partition active" and "no boot device" what I need to do to install windows 10.
  I have no office to boot, I used to run the wind. last summer and 7 MS offered upgrade to the wind. 10 how premium and activated, of I need help thanks
  Concerning

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• When I put my Vista laptop to sleep (or hybrid sleep), it turns off the hard disk completely?

  The reason why I ask, is that if the hard drive is completely off then I'd feel sure put my laptop in its case and then walk with it (possibility of jerking around as if he were completely off), but if the hard disk is still spinning and then I don't want to treat it as if the computer is running.

  essentially, this question is not whether my information is stored in memory or on the hard drive, what power I am saving, etc..  I just want to know, standby or hybrid sleep in windows vista on a portable computer, the hard drive always turns?

  The hard drive (and monitor) turn off during the sleep or hibernation mode.  The only thing is that some things can take the system into "sleep" or hibernation mode (some connectios network can do if configured to do so) how the hard drive and maybe the monitor turns on.  If you pay attention to set up your power options and network options, this should not be a problem for you.  Here's a great article on the problems of Power Options and Sleep Mode so that you can check to make sure that you have none of the problems listed and can be corrected if you: http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html.  I suggest you carefully read this article if you intend to be rude with your laptop, because you consider the closed disc.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  I know PC never fade completely everything, so if there is a way to get personally, I'd really like the head upward on the how to do?  I would be better for me to download all this information on a PHDD, rather than handing the portable real in question so that its content of forensics experts, because current 'Communications Network serious security' we have been subjected to.

  Here you go:

  1. Use an imaging program to create a clone of your hard drive.
  2. Delete the original from your PC hard drive and keep it somewhere safe.
  3. Put the clone in the PC.

  It is the only way to really keep all while still able to use the PC.

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA

• How to: update the hard drive and memory

  Original title: what are the steps to replace my XP hard drive and improve memory? Still use XP.

  How do they manage the software requirements? I have an external hard drive. How to start the computer after the equipment is replaced? The company I bought the machine from five years ago and recently new parts is not provide much information, since their site or their non-English natually Tech.

  Hello

  · What is the number and the model of the computer?

  To replace the hard disk, you must open the computer case. I recommend you contact the manufacturer of the computer or any local technician for assistance.

  Upgrade memory, can be found: RAM: add more memory to your computer: http://www.microsoft.com/athome/setup/addmemory.aspx

• T400 problem booting from the hard disk, blinking cursor on the top left corner of the screen

  I have problems with T400 (2765-TDG). He struggled with the Setup, which requires power 5 minutes/disable to propely operating system boot.

  Computer laptop is less than two months, entirely properly the driver being up-to-date, then after that, nothing's been done about it to user or system administrator. Problem occurred suddenly after two weeks of mentioned maintenance.

  Symptoms:

  • After initialization of the mouse, screen goes black, and the upper left corner white cursor starts to Flash
  • There is no key keyb which can contine begin the process, wait for the reboot
  • There is no other device connected to the laptop, even mouse not
  • We have several, sometimes 3-4, sometimes even 10 times, to restart with the power button in order to get the boot of the operating system
  • When he is successful, just before the start of the operating system, the boot in diagnostic mode to start (with fast start disabled) I can hear only a single beep

  What I tried to do:

  • I changed the BIOS setting to force booting only from hard drive, cut off from any other starting device.
  • Also, changed from AHCI mode to compatibility for hard drive, but without help.
  • Turned off the coast of quick start, but during the startup process, there is no specific error indicated
  • Updated version of BIOS to 2.03 - 1.01 but with no help
  • Restored the default BIOS, no help

  Done some diagnostics generals, and here is what I noticed:

  • After changing the settings in the BIOS, save & exit, the computer hangs with a black screen. I have to turn off and on in order to continue the initialization. The settings in the BIOS are registered correctly.
  • When I was able to boot into the operating system (XP), graphics card sometimes is not recognized, not even by the original driver installation. In Device Manager, I have two graphics card drivers recognized traffic sign with "Intel management engine interface" device with warning sign
  • In Event Viewer, and then only error line is "Problem with HECI driver communicating with firmware" or something like that
  • Operating system is not able to enter in standby mode, it justshows white screen and I have to turn off the laptop by pressing the off button longer

  Any help appreciated. Thank you! I hope I can cope with this before I send laptop to the authorized service.

  Vedran

  I'm sorry to tell you, but in case, can I had to send laptop to the authorized service provider. They replaced the motherboard and the hard disk (!). Now, everything works fine, but puts shame on Thinkpad T series notebook.

• Try to migrate from the hard disk for ssd drive

  Hello, 4 days ago I bought dell inspiron with windows 8.1 5748 and a 1 TB hard drive.

  I also bought samsung 250 GB of ssd drive 840EVO to replace the disk of 1 TB of the laptop. I cloned the HARD disk drive and restored the image in the ssd drive and when I mounted the SDS disc and shot to the top of the laptop I got an error that it cannot detect a drive... Press F2 to enter setup F5 for diagnostics and F1 to reboot.

  First I made sure to rise properly. After I checked I entered the bios where I noticed that the drive is recognized in the details of the system. The model was correct, the capasity as well. Fashion was ahci.

  I ran the diagnostics and they couldn't locate a drive.

  So, is this an incompatibility? I checked for updates to the bios and I see I m to date on that. The player is surelly ok as I have tested on another pc...

  What can I do?

  Thanks in advance!

  Hi Add1ctiv3,

  We recommend that you use the recovery disks that are you ready when you got your system to restore the image of the original on the SSD hard drive. Since they have the same size, it should work without problem.

• Why the HARD disk is partitioned into C & D on Satellite Pro C partition

  Why the HARD drive is divided and how to use it?

  It is important that the one that I use?
  It turns into one big disk?

  The manual says nothing about this.

  Thanks for any help

  Ken

  Hello

  The HARD disk is partitioned and contains two partitions. The C partition is the system partition that contains the Windows operating system. The second D partition contains data drive HARD recovery.
  HARD drive recovery allows you to establish the notebook back to factory settings without the recovery disk usage.

  But it s is strongly recommended to create the recovery disk! The user manual provides the info on that in case something goes wrong with the HARD drive, the recovery disk allows you to recover the laptop.

  Of course, you can delete the D partition if you want to, but before doing so, you must create the recovery disk.

  However, my HARD drive contains 3 partitions. I created an extra. In my case, the C partition contains only system and the unique software. My files private like Mp3, movies, etc. are placed on the D second partition).
  The third partition (E) contains a folder with games.

• Satellite L450 - how do you start the recovery from the HARD disk?

  Hello world

  I just joined the forum and already I need help.

  I have 2 questions (10) I'm an ODP, and I volunteer for a local blind group who all have laptops and rewrite the textbooks in braille users. Now a desire to know how start recovery from the HARD disk drive and what you should do disks for this.

  and (2) another received a laptop computer Toshiba A 100 and it does not start as soon as the Toshiba screen appears it lacks a password, we tried all kinds of passwords, tails of start and a new record of program but it does not start. Can anyone help please.

  Ken

  For instructions how to recover a Toshiba laptop with verification of HARD drive recovery procedure please this document > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  The Satellite A100, I presume that you need BIOS password. Unfortunately, there is nothing you can do about it. Accredited maintainer Toshiba can remove the password for you.

• Satellite P300 - 190 PSPC2C - water spill and the HARD disk does not appear on the Setup

  Hello

  Spilled water on the keyboard. Laptop has stopped working.
  Dried, but did not recognize the HDD start up and HDD does not Set - up.
  Moved the HARD drive to another location of the HARD drive on the laptop and it appears at startup and boot OK.
  Is there an easy way to find and repair the defective HARD drive slot?

  Thanks for any help.

  PK

  Hello

  The HARD drive slot is not repairable. It s a HARD disk controller and I guess the HARD disk controller is dead.
  The HARD disk controller is part of the motherboard and if you want to repair it, so the entire motherboard must be replaced.

  New motherboard would cost a small fortune he of not good about market 350Euros
  That's why I put t think it is s to replace the mobo only to get the HARD drive in the first location of work

  This is my personal opinion...

• Impossible to 'System' to defrag Portion of the hard disk on Windows 7 Pro or Windows 8 Pro dvt7-3000

  I have a laptop HP Pavilion dvt7-3000 CTO that has a single disk drive hard 500 GB.  The operating system has been improved in Windows7 Pro (64-bit) to Windows 8 Pro (64-bit), but the problem occurs in both operating systems.  When conducting the defragmentation of the different hard disks (C:\ D:\, HP tools and system), the percent of the "System" drive which is fragmented never changes, while the % fragmented adequately for other readers going to 0%.  Over time, the system part of the hard disk rose to 27% fragmented.  How to defragment this drive?

  Hello

  The system partition contains the boot files and recovery for Windows 7 environment and should not be défragmentée.  It will always appear to be fragmented and it is quite normal - force this partition defragment would almost certainly avoid the Windows startup.  In addition, the fragmentation in this small partition has absolutely no effect on performance.

  For much the same reasons, the recovery partitions or HP_TOOLS must be défragmentées.

  Kind regards

  DP - K