My laptop locked after I use it for several minutes.

Similar Questions

• When Windows starts it is always a dialogue box that flashes on the screen and the CPU usage high (above 50%), after I connect sometimes for several minutes.

  Original title: at the start of Windows there is always a dialogue box that flashes on the screen, but I've known idea what it is.

  How can I determine which program is using this dialog box? I also don't expect high utilization of the processor (over 50%) after that I connect sometimes for several minutes. I see not all applications running in the Task Manager. The amount of CPU utilization in the services tab doesn't match what I see compared to what the gadget is read in my sidebar. Any ideas?

  Thanks in advance

  Hi Soan,

  1. What is exactly mentioned in the dialog box?

  2. when the problem started?

  3. did you of recent changes on the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can read the following article and perform a full scan of security on your computer.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. You can take a backup of important data before performing analysis.

  Method 3:

  You can also read the following article and try to optimize the performance of Windows Vista.

  Optimize the performance of Microsoft Windows Vista

  Hope this information is useful.

• Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, he

  Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy ecc ecc. Tried all that but I'm stuck. any help, please? Thank you.

  Hello

  Please try following steps depending on your operating system

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

  (MAC)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• I've used photoshop for several months when I login, I lost all my fonts and actions... it says that I have zero days left on my trial...

  I've used photoshop for several months when I login, I lost all my fonts and actions... it says that I have zero days left on my trial...

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• When I connect windows, the hard disk works for several minutes

  Hello

  A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

  What windows software using the hard disk with log in?

  Thanks in advance

  motasemsadelghi

  What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

  Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

  http://support.Microsoft.com/kb/310560

  The foregoing is for XP, but also applies to Vista.

• Icons displayed incorrectly at startup, the computer is unusable for several minutes

  My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

  When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

  This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

  http://support.Microsoft.com/kb/929135

• Since the update Firefox 6.0, some websites do not load correctly. I suspect it has to do with the Java being disabled because of the compatability modules. When I try to go to Tools/Add-ons, I get the message "Loading" for several minutes without chang

  Update Firefox 6.0 is useless to me because many websites I visit are not displayed properly, I guess because the Java modules are disabled because of incompatibility. They appear correctly in Internet Explorer.

  In addition, the add-on from Trend Micro is not compatible, which leaves me with a positive feeling.

  When I try to check to see if these modules can be updated, the menu item Tools/Addons just goes to a page with "loading" and stays there for several minutes without change until I close it.

  I would like to know the procedure to regularize this version of Firefox to my previous version that worked.

  Firefox 5.0/5.0.1/4.0/4.0.1 and earlier 3.6.20 all contain questions of security and stability that will not be corrected. You put your system at risk by using any version of Firefox that 6.0 or 3.6.20. Any person who displays a link to other versions is to be irresponsible, in my opinion.

  Java
  
  If the incompatible extensions in Add-ons > Extensions are Java Console, you have no need them unless your doing Java development. Most of the users have not yet installed, but Java will install Java Console with each update. You can delete them manually:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  The only thing that affects the functioning of the sites/Java applets on the web is the plugin (Add-ons - > Plugins) "Java (TM) Platform SE (version)". Do not forget that it is enabled and that you have not all extensions which affect/block "scripts".

  • Check commonly used plugins: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Update or install Java (aka, next generation Java plug-in for the Mozilla browsers): install or update Java in Firefox

  Trend Micro
  
  You must contact Trend Micro or go to the forums on their website to inquire about their plans to update the add-ons/toolbars they install in Firefox.

  Problem with the display of the Add-ons Manager
  
  The Add-ons Manager gets in a loop of loading due to the recent update of Firefox 6 and servers being overloaded because users and update process are looking for updates to the add-on. If you stay away from the "Get Add-ons" selection on the left of the screen of the add-on Manager, you should have no problem with that. This situation is expected to resolve when the overload of Firefox 6 update is complete. I do not always use this "Get Add-ons" option, instead, I go to the website of modules and the search for what I want from there: https://addons.mozilla.org/en-US/firefox/search/?q=clone & cat = all & x = 0 & y = 0

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• After leaving HP laptop which runs for several minutes, system performance decreases

  whenever I leave my computer (about 1 year old laptop HP) for more than 15 minutes, when I come back I can not access the taskbar. I click on say windows live mail and get the little symbol that it tries to open and 30 minutes later, he did the same thing. Ctrl alt del so annoying in Task Manager, but if I click there I get a gray screen with a cursor, but it won't do anything else, no matter how long I leave it.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see these links:
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  It will be useful.

• CC police goes away after I used it for months

  I was using the Alexa Std fonts, which I synced months ago using earlier versions of CC. Today, it is there. Then tonight, he disappeared. I checked on Windows/fonts and checked that it was missing. I went to the CC, but he said that the police were always synchronized. I removed, then it resynced, but it will not even install on Windows. I left CC and then restarted. Quit Indesign, rebooted. Nothing works. I don't know why he stopped, or why it will not be installed, but I NEED. I'm almost done with my project and do not have the luxury of a big delay or having to change fonts after the customer has already approved.

  Help, please.

  I was able to get the problem solved. I contacted the support typekit team (e-mail address: [email protected]) and a good person named Molly responded the next morning. Here is the solution, what they suggested. I tried and it worked!

  • I'm sorry for the trouble. There are a few things we can check everything out right away to start debugging this:
  • -First of all, make sure that you are connected to the application of creative cloud with the same Adobe ID you use for Typekit. Account information are under Preferences > General.
  • -Then try to disable the synchronization of fonts in creative application Cloud, wait for a moment, and then turn it back on. The option to do so is under the gear icon in the preferences > creative cloud > fonts (Typekit 'power').
  • The fonts that you had previously selected for the use of sync should now automatically synchronize to the tab fonts in the creative cloud application.

• HP 15 laptop: If my system is connected to the internet and I use it for 5 minutes it will reboot.

  I really need solution to this urgent problem that gave me concern for some time, once I connect to the internet and I don't use my PC for like 5 minutes, it restarts itself and I will lost all my unsaved files and sound very bad I tried to scan I find the error, but in vain , so please I need a solution to lastin' to this... Thank you in advance. SaiTech.

  I'll be happy if this has been solved, e-mail: [personal information]

• Laptop locked after phone scam.

  Separated from this thread.

  Hello..

  Someone claiming to be an empoloie of microsoft and trying to 'help my mother' to clean his laptop hacked the mother... (Thank God it's an old laptop and something not really interesting inside to be stollen) and instaled a password when you want to resart windows... (my mother has not requested a password before)...   The problem is that it is locked and can't do anything with this laptop?

  What should do?  Throw the laptop and buy him a new one?  or try to clean everthing in the pirate laptotp and install from the beginning a new window.  ???

  Hello

  We can not help you with passwords here, due to the policy of Microsoft.

  Do not throw.

  I suggest that you reinstall the operating system.

  See you soon.

• HP Pavilion x 2 10-n011nl (Suns: laptop locked after upgrade windows 10)

  Two days ago, I bought a HP Pavilion x 2 (red sunset) 10-n011nl and immediately I started upgrading Windows 10. This medication is ok (no error message), but the first new starting system, the machine is in a loop! Only a black screen with white logo of HP and animation circular points. It is impossible to stop this, none CTRL-ALT-DEL or other. I have to wait for low battery condition (more then 6 hours!).

  And even once, he repeats the loop.

  What can I do?

  Thanks in advance

  Because it is new, maybe start to type Esc as soon as you press the button start.  That should bring up a menu before starts the boot process.  In this menu, click F11 to run the recovery.  Who will restore the PC to 'new factory' and retry the upgrade of Windows 10.  You might want to try the media creation tool page, if it fails again.