My laptop mouse does not work. I think the keyboard of stick. I bought this laptop about 4 months ago.

Similar Questions

• HP wireless mouse does not work most of the time

  Original title: problem with my wireless mouse

  I have a problem, my wireless mouse does not work most of the time it's repair turning market sometimes, sometimes resembles
  dead, what is the problem I have the latest driver updates everything was ok, but 3 days ago, when I try to use it I see that it does not work
  now I can't use it, I try to restore my computer but locks is not any point of restoration and I plug a different usb port on the port still does not, for more than 2-3 minutes sometimes work! , look at these pictures when my mouse is not working the red light does not work!

  What should I do I have this mouse for 3 months when I buy with my hp touch desktop

  
  

  Thanks so much, I change my batteries and now works seems once again, the batteries will go fast
  can u help me to fix the error, I'm showing you pictured RunDll

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• BlackBerry smartphones the * does not work to lock the keyboard

  I don't know why but the * button no longer works to lock the keyboard.

  How to correct?

  I solved it after power off and remove the battery.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• My left clicker on my mouse does not work?

  My left clicker on my mouse does not work properly. The right clicker can be used to select things. I don't know if something has been disabled, or if my mouse must be replaced. What should I do?

  Hello

  Control Panel - mouse - for left-handed. If the opposite problem on the other side
  Then, the mouse has a problem and needs to be replaced.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• 3480CT Accupoint mouse does not work

  I just bought this laptop for use at home as a small portable computer which can be connected to our wireless network and can be used anywhere around the House easily.

  In any case, I have and the accupoint mouse does not work, any more than the mouse buttons. The person I bought said he thinks its because the correct driver is not installed.

  I would really appreciate if anyone can help.

  Thanks Mark

  Hi Mark,

  I see that the Web Site of Toshiba UK does not list the reader pionting device for your laptop model. So I assume that it should use the standard version of Windows XP.

  Check in for your pointing device Device Manager to see if it is showing up with errors. Also, you should be able to run a troubleshooter for it and perhaps also a calibration tool. (You may need to move around with the arrow keys or tab).

  If all else fails, you can try to recover your system with the recovery CD and that the pointer is still not working properly, then this would indicate a hardware fault.

  Kind regards

• Satellite C855 - mouse does not work - keyboard freezes.

  Hello

  I tried several times to call on the long waiting support phone number and no answer (queued for centuries)

  I had a problem since 1 week with my laptop Toshiba as below

  The trackpad (mouse) does not work despite to remove the battery, pressing f2 and FN then f9 and f10 as mentioned in various forums

  Also, the keyboard is blocked completely several times - I checking also tried other things like BIOS - active trackpad

  And finally we have also made the SYSTEM RESTORE to an earlier date when everything was going well on laptop

  Serial number: 2D138575R
  Model: Toshiba Satellite 2F0 C855

  Help, please!

  There are a few options that you could check.
  *-> BIOS update.*
  In the case where there is a new version of the BIOS of your laptop, perform the update on your device.

  *-> System restore / restore *.
  You wrote above you already set the laptop to a previous data, but I'm don't think it is good enough. It s advisable to get the laptop back to factory settings.
  How?
  Using the previous created recovery (disk or memory stick flash) media or using the option to drive HARD recovery (power of the device, press F12 and select HDD recovery)

  Of course the HARD drive running recovery would lead to the loss of data, back up crucial data.

• New mini optical mouse does not work

  Hi all:

  I used a mini mouse optical for a few years now without a single problem. I just plugged into the USB port, and that's all. Yesterday it died on me, so I bought a new.

  The mouse does not work and the cursor stays frozen at least that I move it using the touchpad on the laptop.

  OS is Vista
  Satellite P100 series

  More information:

  -the little wheel on the mouse will allow me to scroll the page to the bottom, but it's just what works
  -the drivers are all up to date
  -restore the computer to an earlier date
  -run a full virus/malware scan, nothing came
  -USB are good; I tried all ports, including the ports where something else that works has been connected
  -After I restore and connect my mouse in I saw the computer install the latest drivers

  The only thing I can think is that the new mouse is defective but I doubt that. However, it is possible I suppose.

  Can anyone else think of any other possible explanation and how I can solve this problem. Could something changed in the BIOS? Is there a setting that has changed I have to look?

  Thanks for sharing this with us!

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.

• My mouse does not work on a game

  I got the sidki and my mouse does not work on the game. How I've implemented so it will work or is there a way I can use a Xbox 360 controller

  thomaswecker,
  We will need more information to help you with this issue.  What is the game?  What version of Vista are you using?  Is the USB mouse or wireless?  With respect to the use of the x-box360 controller, it depends on the game.  All the instructions for implementing any type of input device, be it a mouse or a game controller, should be included in the games instructions.

  Let us know this information so that we can be of further assistance.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my mouse does not work with care

  Hello

  my mouse does not work with care, perfectly.

  today when I turn on my laptop, I can't use mouse.

  I tested it with another port, but my mouse does not work.

  day 3, there is my boy take in her mouth and lower teeth but I cauth.

  my mouse's turn on and turn off several time.it, s a mouse of the lamp and the South, but it's the turn of power.

  When I turn on the top of the Tower, the mouse is unknowen.

  Thanks and respect.

  Hello

  It seems that the mouse has developed a problem. Have you tried it on other computers?
  Have you tried a different mouse on your computer?

  I hope this helps.

• My mouse does not work when you type

  Whenever I type in Internet Explorer, Mozilla Firefox, or ANY program for that matter, I try to move the mouse, and it does not work, but after I've finished typing, I can move my mouse again. I know that this does not seem like a big deal, but when I play games like Garry Mod (I try to play often, but it never works because I use A, W, S, D to move and the mouse to look around, so I can't) I can't look around, making the game practically unusable and not fun at all. I looked on the Internet for similar problems, and some have said that it must:

  «Edit the file "/ etc/default/mouseemu" and put 0 instead of 300 online»

  Code:

  "TYPING_BLOCK ="block - typing -"300"

  Make sure to uncomment the line by deleting the symbol #. Finally, restart mouseemu entering

  Code:

  sudo /etc/init.d/mouseemu restart

  in the Terminal. (http://ubuntuforums.org/showthread.php?t=353162) »

  I don't know what it means and if someone can help me in some way, it would be greatly appreciated.

  Thank you

  Sincerely,
                                         
  Alex H.

  I can't comment on the proposed amendment that has been given.

  I guess you already checked the mouse settings in case there is some fantasy in this utility who think you want that he disabled this way.  I can't imagine what that but there might be something that hides the mouse during the strike that is defective.  Disable all suspicious settings & try again - you might need to reboot to get a reliable result.

  Initial checks, I would say go into Control Panel, Manager of devices.  Search for all the warnings on the mouse & the video adapter.  Update their drivers [right-click, update drivers].

  If this does not work then check the compatibility of Windows http://www.microsoft.com/windows/compatibility/windows-7/en-gb/default.aspx and check to your PC & manufacturers of mouse support sites for advice, including Windows 7 tips & updated drivers.

  If this does not fix it then confirm the list of controls that you did & results back here.  Include your brand-model-version PC, the mouse brand-model-version, the version of Win7 & x 32 / x 64.

  Good luck with it,

• Mouse does not work after the upgrade to Windows 7.

  I recently installed Windows 7. All right, except that my mouse does not work. I tried several types: series, USB, PS/2 and wireless. I even bought a Microsoft Mouse, but while the keyboard is very well the mouse still won't play.

  Hi Jollydiver,

  Thanks for posting. You will need to contact HP to see if there is a driver available for Windows 7 chipset.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think