my laptop msi restarts error message 0xc000000eg

Similar Questions

• Receive vc system tray restart error message. How can I stop this on my laptop?

  Hello

  Get VCSystem plateau is restarting error message. How can I stop this on my laptop? My laptop model number is

  VPCEB4AFX.

  Hi nagk98,

  I'm sorry to hear that you are having problems with your laptop. The plateau of VCSystem is a process used by the VAIO Care program. To solve this problem is that you need to upgrade your VAIO Care program. You can uninstall and re install the program if VAIO update fails. You can check this link for more information on the VAIO update utility. I hope this helps.

  Thank you!

  Sean

  If my post answered your question, please mark it as "accept as a Solution.

• I get the following when starting my laptop Dell - stop error message: 0x000000ED (0 x 84308900, 0 x 00000000, 0XC000009C, 0x00000000)

  Hello

  Since last night I get the above error message on my computer at startup.

  I can not start in any other mode and tried to use the recovery console (starting on the DVD) using FIXBOOT and CHKDSK /R but still no luck.

  I also tried searching on the error code with no luck.  I recently bought an IPOD but was already using itunes and the computer worked very well after the IPOD synchronization.

  I'm stuck and would be grateful if someone could help me solve this problem.

  THX,

  Eliot

  It is proably a record broken. Restart your computer and press F8 when Windows starts to load. Select the last known configuration of God in the menu, then press OK. I had the same problem, and that it resolves. Maybe a program to train register is broken.

  ---------------------------------------------------------------------------------------------------------------------------------
  If the answer can help, mark it as "useful". He he has solved the problem, mark it as 'reply '!
  Andy

• trayapp.msi c6180 error message

  Hello all I've had so many problems with this printer. I'm running window 8 64-bit and all of a sudden my printer had disappeared. I tried to re install and I get the MSI error message. My solutions Center continues to come up with this error, soultionscenter.msi. and trayapp.msi.  I'm at a loss and computer savy at all. Help, please!

  HP took care of it thank you!

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE

• Photoshop CS5.1 on a laptop Presario 2570US: error message on the graphics card

  I just installed PS CS5.1 on my Presario 2570US for the first time. The first time I launched, he froze. After a reboot, it launched but gave an error message "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software. "

  The display driver is the Radeon IGP 345 M, the driver from ATI Technologies is v. 6.14.10.6436, dated 15/05/2004. Update of reports of driver that it is not just recent, better driver.

  What should I do?

  CS5.1 is compatible with the 2570US?

  Since posting my request, I went to Adobe PS help forum and searched. There is a LOT of discussion of this error message, which seems to have emerged since CS4. Seems to be triggered by a variety of unrelated things: too little RAM for their tastes. wrong settings of Open GL in PS (parameters vary with the video driver card); driver is installed. All user comments, apparently no gurus from Adobe. If it doesn't seem to be a problem of HP.

• error message "cannot load the main class.

  I ran windows update yesterday and installed the recommended updates, restarted my laptop today the error message "Unable to load the main class" appears in a box and I couldn't do anything until I had closed this box, after the loading of firefox it displays a message not responding, then a bar indicating that plugin adobe did not start successfully so I clicked to reload page Then, I rebooted my laptop to see if this solves the problem, but the same error message appeared and firefox have responded in the same way, someone has an idea how I can fix this problem?  I run anti-virus software and malware from comodo and my OS is windows vista 32. I also downloaded an update for adobe flash yesterday but the problem has not produced until after I had done the updates of windows.  Thank you

  Hello Fiona,

  Thank you for your response.

  You are facing this problem might because of Java program on your computer.

  I suggest you perform the clean boot and check the status of the issue, which will help you identify the problem.

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section:How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Hope his helps.

• A single application preventing the closure of the displayed error message...

  Hello

  When I closed my laptop, the displayed error message one application preventing closing down.

  as directed by your previous post, I have set up my laptop with it, but this problem yet and still occur.

  now the error message saying Windows host prevents your stop down.

  Please, help me to overcome this problem.

  Hi Regis,

  Thanks for posting your question on the Microsoft Community forums.

  I understand that you get the error message so that the closure of the system. However, I would like to know some more information on the issue to provide you with better assistance.

  1. Who is "previous post" you are talking about?
  2. What is the exact error message you get now on "Windows"host?
  3. You did it any significant hardware or change software on the computer before this problem?

  The question may arise if certain services (including background Windows services and other third-party application services) are still in operation when you try to shut down the computer.

  The applications or programs sometimes have ongoing services which are still ongoing even if you close your programs. Properties of an instance, there are many third party messengers that require you to sign in to use the application. Thus, when you close the application, the corresponding services are sometimes even functional whereby the program restarted in less time and log into the self-signed.

  Therefore, usually do not completely quit us some programs when we literally close them and so we get these guests. To diagnose the problem, you can restart the computer in safe mode when only minimal services are in use, you should not get these guests so that closing.

  If you do not get these guests in safe mode, you can also try to boot your system in a clean boot, a selective startup in the third that most of the services are disabled. To do this, you can consult the following link:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need additional help on the issue, we will be happy to help you.

• Error messages appear during the priming by Satellite A100

  I tried to start my laptop and this error message appears:

  hidden, system bios video BIOS with a shadow,
  bus controllers USB PCI-card resource conflict mother Bus: 07, device: 06, 01 function
  resource conflict-PCI mass storage controller on card mother Bus: 07, device: 06, 02 function
  resource conflict-PCI PCI on the card mother Bus: 07, device: 06, 03 function

  How can I solve this prob?

  Hello

  Looks a bit like a conflict of devices on the motherboard.
  There is always a mentioned device: device: 06
  Then perhaps, all error messages are related to the same device. I m not very well what 06 device could be, but I think that it s miniPCI device and, possibly, a wireless network card.

  Try to remove the local NIC in the laptop and check again.
  But before you do this, go into BIOS and set the BIOS to default settings. Save the changes and start the machine again.
  Check if the message appears once more

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

• Media Player all of a sudden will not play the dvd. Error message: Windows Media Player cannot connect to the server

  Original title: Media Player all of a sudden will not play the dvd.

  Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.

  Hi mcraigQY

   

  1. when exactly you get the error message?

  2. you try to listen to music from any remote location or try to play a DVD?

  3 have you tried to play a different CD or DVD?
  4. what happens when you play the same DVD on another computer?

  5. for how long have you been faced with this problem?

  6. the DVD folder that you are trying to play supported by the windows media player is it?
  7. What is the type of DVD that you try to play?

  Let us know the answers to help you best.

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Error message comes up saying ' there is a problem resetting your PC has not changed. "

  Original title: reinstalling Windows

  My laptop (Dell Inspiron) comes preinstalled with Windows 8, but not working now - it runs very slowly and often takes multiple attempts to turn on. Often said 'Prepare auto repair' when I turn it on, it remains just on this message.

  It's less than 3 years old (out of warranty) so I think that it's a software problem and not material.

  I tried to do a factory reset to clear the laptop, but an error message comes up saying ' there is a problem resetting your PC has not changed. "

  I then tried to create an installation of windows on a USB media using my product key, but impossible to use my product key for retail sales.

  I am now at a loss of what to do that my laptop is pretty useless as it is.

  It's a hard drive to a failing hard drive error / failed.

  It's a DELL error code, not a Microsoft error code

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19533510

  Replace the hard drive or ask in the Dell Forums.

• HP dm1z error message: "HP Connection Manager not installed. Application will exit.

  My HP dm1z laptop shows this error message at startup: "HP Connection Manager not installed. Application will exit. "What should I do about it?

  Hi Rick,

  Try to download and install this version of the HP connection on the following link manager.

  FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52822.exe

  Kind regards

  DP - K

• "NTLDR is missing. Press CTRL-ALT-DEL to restart"is the error message I get every time I try to go on my laptop. What can I do to solve this problem, help!

  I use a Packard Bell laptop and this happens everytime I try to turn on my computer. When I restart it, the same message so I'm never able to use it. Your help will be very appreciated.

  Hi THOBO90,

  1. When did you start to question?

  This problem may occur if the MFT root folder is very fragmented. If the MFT root folder contains many files, the MFT might become fragmented to an additional allocation index is created.

  Try the following steps to resolve the problem:

  Step 1:

  Boot with the Windows XP CD in Recovery Console.

  b. Copy NTLDR and NTDETECT.COM on C: drive i386 folder.

  c. attempts to boot to the desktop.

  If not able, follow these steps.

  Step 2:

  In Recovery Console, run 8 following commands (press ENTER after each line):

  a. CD of the

  b. ATTRIB C:\boot.ini h

  c. ATTRIB C:\boot.ini-s

  d. ODILE r C:\boot.ini

  e. del boot.ini

  f. BOOTCFG /Rebuild

  g. Add to the startup folder

  Step 3:

  If you can start Windows, but get a message saying that the boot.ini file is not valid.

  a.Create a new boot.ini in Notepad and saved on the hard drive.

  EXAMPLE:

  [boot loader]

  timeout = 30 default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Edition family.

  / fastdetect

  For more information, see the following KB articles:

  Consult the 330184 KB and follow step 8.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder

  http://support.Microsoft.com/kb/320397

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.