My laptop seems to restart blue screen, and then stop automatically... once again.

Similar Questions

• System will not start completely, blue screens and then restart

  Well, I need serious help. I have Windows 7 and installed Ubuntu on my XPS M1730. Yesterday my laptop shuts off and when I went to put it back on it would start start and then blue screened and restarted, continuing the cycle. I tried to use the system restore (Gets an error). I also tried to reformat using the Windows Vista disk that came with my laptop. It does not start, it just goes to the screen where I can choose between Windows 7 and Ubuntu. My friend is here and I'm on this laptop, and we wanted to play our game together. So please help quickly (if it is a command line or other) then we can game. Thank you :D

  To boot from a DVD, positioned on the BootOrder:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• When I go to pogo my computer gets a blue screen and then turns off and rebooths

  When I go to pogo.com I log on my screen turns blue, then wrote about this, but it's on and off fast cannot read, there do not have the time

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• I'm trying to sync my iPad with my laptop. When I connect my iPad to my laptop, I get a blue screen and my laptop stops.

  I have iTunes installed on my laptop

  .

  Get code error on their website or contact Apple technical support.

• Hi whenever I turn on my laptop I have a blue screen and a search of disc it says verification system fat 32 file and then when its finished, it begins to freeze how do I fix this, you can

  everything on the internet

  I'm not sure that "everything on the internet" has to do with your topic, but it looks like your hard drive is dying.

  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• blue screen and error stop 0x00000007b

  error message appeared 0x00000007b?

  0x7B bug check code:
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  What is your computer brand and model?

  What country do you live?

  Try the last good known Configuration:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_last_good.mspx?mfr=true

  You have a Windows XP disk, or you are dependent on a backup copy of Windows XP on your hard drive?

• Blue screen and the computer goes into a reboot loop after every 15 minutes

  Original title: fix blue screen

  Computer stops automatically at almost every 15 minutes apart, the blue screen appears and is long enough to read the information to fix this.  Computer automatically restarts.

  Hi Lady Cole,.

  a. when the issue occurred?

  b. remember to make changes to your computer before the problem?

  Step 1:

  To disable the automatic restart in case of system error, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

  When a problem causes a blue screen of death or another major error that stops the system, the computer restarts automatically. Need to restart manually, and you would be able to note the error message and after return.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Step 2:

  Start your machine in safe mode and check if the problem persists.

  Step 3:

  If the problem does not occur in safe mode, I would like you to put your machine in a clean boot State in order to determine whether the problem is caused by a conflict of third party software. Clean boot helps eliminate the conflict of third party software.

  Note : do not forget to restart your machine as usual.

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• HP computer shows a blue screen and restarts.

  * Original title: Puzzle blue screen

  I tried to help a friend trouble shoot a problem. Its a HP computer, displays a blue screen and restarts. We are unable to read the message. I went through the newspaper and cannot determine the cause error. I have several possible solutions thanks to this forum, but I'd like to have someone looking at the landfill to see if I'm on the right track. It seems to me that it could be a power supply problem.

  Here is the link on Onedrive for minidump files that I found.

  Thank you.

  WPD50

  No puzzle here.  Symantec is killing netio.sys.  It should be removed and replaced by MSE

  Symantec is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• iPhone 5 shows blue screen and restarts automatically

  iPhone 5 shows blue screen and restarts automatically

  1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

  2. If you can't do it you may need to restore the phone via iTunes

  (1079)

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen and continuous restarts and repeat. Error code given: ___STOP: 0x00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)

  Today, I started my computer as usual worked well. After about 30 minutes of use it has restarted without having to provide me at all. When the computer reboots, it starts as usual, after the XP loading screen, it goes to blackscreen for a second, then a blue screen error message appears, then disappears. The error code given is:

  STOP: 0X00000007E (0XC0000005. 0X87F23B2, 0XF793D26C, 0XF793CF68)

  I managed to take a picture of him just during one of the reset and got this. Incase you need to see the full message. http://img21.imageshack.us/img21/9268/1image0421.jpg

  Initially I thought it was a stick of RAM going bad, so did reinstall each stick etc. to know who does what, and all the sticks started the computer at this point where I get the blue screen. Then maybe this issue is not a RAM? I have NO idea what this error code is... Does anyone have an idea? I did my share of research on the internet and that you have not really found any answers for my situation.

  Solved. I put in my XP CD and booted from it, press ENTER for a new installation, then to the next option, press 'R' or a repair installation. After he went on his own thing, its up and running again, and all my files/preferences have been saved too. The only thing that was wiped out was my WINDOWS folder, so I just need to download IE8 and updates for XP etc.

• PC restarts showing a blue screen and ATI RADEON XPRESS 200 graphics works only with WINDOWS 7

  (1) I have a motherboard integrated ATI RADEON XPRESS 200 SERIES
  I installed the 64-bit windows 7 but everytime I use, it shows a
  BLUE SCREEN and instantly gets restarted.

  ERROR INFORMATION
  
  Problem event name: BlueScreen the system Version: 6.1.7600.2.0.0.256.1
  Locale ID: 16393 BCCode: 1 BCP1: FFFFFFFFC0000005 BCP2: FFFFF960000D69EA BCP3: 0000000000000000 BCP4: 0000000000000000
  OS version: 6_1_7600 Service Pack: 0_0 product: 256_1

  Pls explain why this happens n solution for this?
  
  (2) I downloaded the latest updates for microsoft video card, but they are in the form of files * .cab, can someone explain how to install them.

  With the Xpress 200 integrated graphics, you will not be able to get Aero or other effects of Windows 7.

  You can adapt a motherboard graphics card: AGP or PCI-E slot there. A Radeon 3400 or other card compatible Windows 7 can be pretty cheap and would provide Aero and other effects of Windows 7.

• Crash blue screen and restart

  Hi all!

  I have a blue screen and it's really annoying.

  Maybe 3-4 days, I have reinstalled Windows because of an error on a blue screen. It worked without problem, quick, and there no crash so far.

  Here is the error code:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: c2
  BCP1: 0000000000000007
  BCP2: 000000000000109B
  BCP3: 00000000041F000C
  BCP4: FFFFFA816C18B3A0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\101712-24460-01.dmp
  C:\Users\Beams\AppData\Local\Temp\WER-27909546-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  I couldn't find any help online.

  If this can help:

  CPU: Intel Core i7 - 2600K @ 3.4

  8 GB RAM

  Mobo ASUS - P67

  Graphics card: ASUS GTX560 Ti

  Thanks for reading.

  Hello

  something about the control bug 0xC2 is here:

  http://msdn.Microsoft.com/en-us/library/ff560185 (v = vs. 85) .aspx

  Can you zip the minidump in the C:\Windows\Minidump folder files and make available (link) via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  LC