My laptop starts to turn himself :(

Similar Questions

• Webcam starts to turn himself.

  my webcam starts to turn himself.
  somebody's watching me?
  I could not find any virus or Trojan horse.

  Hello!!

  Sorry for the late reply... but he tool some time to analyze all the stuff... now that I have gone through the report and read on the support sites... you Webcam is not officially windows vista supported and your drivers are in compatibility mode... That's why your drivers are giving a conflict to the USB system and the power is cut through again... the only way to stop this by changing the webcam...

  but you can try to do one thing... Please go to Device Manager (-> right click computer-> properties-> Device Manager-> continue-> universal serial bus-> check each displayed items properties to check which port it shows your installed webcam and deselect the option to turn off the device to save energy...)

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• laptop starts to turn on and off

  When I turn on my laptop computer hp sign then turn off and on. This process keeps repeating. Help please

  Dear customer

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you're Intermittent shutdown and not power issue sometimes with your laptop

  We will surely help you with this

  According to the error message you posted, I suspect that there could be a hardware problem on your laptop

  It is possible that the hard drive on the laptop might be corrupted or it might have bad sectors

  Please perform the steps as shown below:

  1. power off the laptop

  2. turn on the device and keep tapping the button exhaust when departure upward to access the Start Menu

  3. now, here, please select as well in advance or the diagnosis tab option [F10]

  4. you should find the possibility to run tests on the hard drive and memory

  Note: Please perform these tests and post back with any error message details

  Please click on the link below to find the steps involved in running a hard drive Test

  http://support.HP.com/us-en/document/c00439024

  http://support.HP.com/us-en/document/c01443317

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• My laptop starts to turn on at startup repair and it says tht something's wrong with the C:\ drive

  I have a Sony Vaio laptop and before it worked fine, but then all of a sudden all the applications I turn kept which crashing then crashed the computer laptop everything I restart the laptop everytime that happens and now it only when I turn it on do Startup Repair open saying tht there is a mistake with the C:\ drive and I need to contact the administrator then turns off, and the same thing is repeated when I turn it on reapair start again. If someone could help me please I would be very grateful, thank you for your time

  First test the hard disk for physical errors. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Why has my laptop started to randomly stop before turning off

  Original title: computer power questions

  Why has my laptop started to randomly stop before turning off? I had no problem with this computer at all for more than a year. I tried to run all the updates available, but of course, it turned off before she finished. Sometimes it will run fine then others that it is a nightmare. can anyone help please? I would be very happy to help!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check with these utilities to see if information may be collected: BlueScreenView run to see if
  There were some BlueScreens and MyEventViewer at the time, check if the stop (or a little
  seconds before) see the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  =========================================
  =========================================

  More if needed and you think that the closure could related to the Options of food or sleep.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• G7-1070us Pavilion: laptop starts but the screen is intermittent

  laptop starts up ok and the display is available on the external monitor or a hdmi to the tv. turn top display backlight lights up but the screen is blank.

  Hello:
  
  Yes, it was what I thought. I do not understand how the same pilot worked as a temporary solution.
  
  Decide for yourself after you have identified the cause of the problem. If it's just a matter of cable, I think it's worth repair. Otherwise, I have no idea, maybe it'd cost you big.
  
  Give it to get it repaired in a good local computer shop.
  
  Concerning
  
  Visruth

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• I have a message that is displayed on my laptop whenever I turn it on it is C:\Program Files (x 86) Arcadeweb\arcadeweb32.dll

  Registry cleaner

  I have a message that is displayed on my laptop whenever I turn it on it is C:\Program Files (x 86) Arcadeweb\arcadeweb32.dll the last time I had one of these errors, I did nothing about it and lost my computer.  If you don't want do us to use a registry cleaner then how I get this error fixed? I could use all the help I can get. Please, I beg you.  Thank you.

  Hello

  Registry cleaners and system optimizers who attest her can solve many questions are simply too hype
  powder of snake oil. More likely to damage the system to fix anything.

  Good luck which is malware then please do a thorough check. Following message will show how to remove as
  a startup message.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Laptop starts up when the lid is opened

  I spilled some water on the laptop. I used AC power with no battery attached. When this happens, I quickly pulled the plug. I knew that the warranty does not damage the water so I dissamble each component and put them in dry box for a week. Then I used alcohol to remove all stains left behind.

  After I got everything back up, the laptop starts fine when the lid is closed and hooked to an external monitor. Can I use any program withou any problem. But it wouldn't start when the cover is open. It was as if someone was holding down the power button to force the computer to turn off.

  My question is, how the laptop detects if the lid is open or closed? It is magnetic, or is it using a switch as a reed switch?

  my laptop is HP Pavilion SleekBook 14 14-B031TU with the motherboard: DA0U33MB6D0-698523-001.

  Kind regards

  Ahmad

  Most newer laptops have a sensor (switch) magnetic in the cover of the screen bezel or the touchpad.

  You can test that by sliding a small magnet around the telescope cover touchpad area and/or.

• My laptop will not turn off...

  My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

  Hello

  ·         This happens even when the power chord is connected?

  ·         What is the brand and model of the laptop?

  Method 1:

  I suggest you to check the power settings on your laptop in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2:

  I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 3:

  I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Check out these links for help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

  Kind regards

• Laptop starts randomly (does not start first time)

  I have the HP Pavilion tx1000 for 2 years, he worked normal since now. The problem is - computer laptop starts from the second, third or more times.  When I turn it on, only the led indicators start working drive and hard, but no initial priming and the white screen. Then I would do market and randomly, it starts normally. Then will he charge system works very well. I use Debian Squeeze OS, but think there regardless of the installed system. I think there BIOS problem or a power problem. I know it's hard to help me with this, but hope someone know approximate reason and do me a favor to give a hint.

  s/n {removed privacy}

  p/n GD617AV

  Not exactly. The video chip is on what is called ball grid array. As the chip is overheating and cools down, the connections to the motherboard (i.e. Bay) become brittle and break off, so that there is no full contact with the circuit of the motherboard. It can be "reorganized" so that it becomes liquid and all connection again by applying heat evenly. The trick is to do it at the right temperature and to monitor the process. It can be done by the motherboard in the oven just cooking, but it is not reliable. It works best when you have real expensive equipment, but which does not improve with real expensive equipment?

• Laptop won't turn on after the new battery.

  A few days ago, when I got home, I found that my VAIO VPCF1290x of 3 years was dead. The battery indicator has been telling me to get a new battery, but I thought it would be enough for now.

  Problem: Laptop wouldn't turn on after pressing the power button.

  (1) with the adapter and the battery still in my laptop, by pressing the power button does not turn on my laptop. However when I press the power button, green light battery (the button itself) indicator on for about a second, then dimmed quickly.

  (2) after reading some forums, I decided to fill my laptop into the battery button for a good 30 seconds trying to turn slot WITH the adapter. It turned on my laptop, but it took a good 2-3 seconds for the laptop to make all sounds as if it was about to start.

  I have since then bought a new battery and a reason that my laptop lights at all. When I connected my new battery to condition it green button energy came on again for about one second then disappeared.

  I don't know what's the matter with my computer and would like to help. I KNOW that I should probably get repaired but would like an idea as to why my laptop behaves like a *.

  EDIT *.

  To give more information, when I have the OLD battery placed in the computer of the battery indicator is a constant flashing orange.

  With the NEW battery sony return the same thing occurs when the battery light constantly blinks orange.

  
  

• HP G62:. Hp G62, laptop won't turn on even after trying hard. Help

  My laptop won't turn. Home from work two days ago and I tried turning on but nothing works. I read through messages to hard test but failed. I don't hear any sounds on my laptop either. Can someone please help me understand what I need to do to get my laptop running. Thank you

  Thank you. . No light even after plug in the laptop. I've never seen a light on the power adapter even when he was working. Where is the light on the adapter? Please help I feel empty without my cell phone

• WiFi starts to turn on and off

  Every 15 minutes, my wireless starts to turn on and off repeatedly at a fast rate. I mean, it turns off and then over time offshore on a second and repeat this until I put the computer to sleep, then wake it back up. It of really annoying and makes the difficult to use computer.

  I have a mid-2012 13 "MBP El Capitan running.

  Here is a tutorial that can help.  http://www.switchingtomac.com/tutorials/OSX/MacBook-Pro-constantly-dropping-wire less-con You can also go to/network/advanced/airport system preferences and delete networks that you no longer use. Or swipe your preferred network in the upper slot. Make sure Remember networks this computer joined, is checked. Or you can remove and re-add your network. Reset router by unplugging for 10 seconds then restart him. Make sure the firmware on the router is up-to-date.