my laptop will not be closed. I have xp proffessional__

Similar Questions

• My laptop will not be closed unless I have press and hold the power button

  Computer laptop MU shut unless I press the power button. There is no closing

  Go to control panel-> Power Options control. Click on choose what the power button and the click of the left mouse.

  Look at the options. Select other options to test.

  Also, see the documentation that came with the computer or the web site of the manufacturer for other possible options.

  It is possible that the laptop tries to install updates and the process is blocked somehow.

  Tom Ferguson

• laptop will not be closed

  1/16 installation and custom close aso do not have a restore point I can do?

  HI pintsize,.

  Please take a look at the similar post for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/laptop-wont-shut-down/678eafa8-154F-47d1-97f7-3ba0c115f585

• My laptop will not be closed.

  nothing happens it just on my wallpaper. As my message of periodic report remains in the lower right screen and I can't get rid of it.

  Hello

  (1) operating system do you use?

  (2) since when are you facing this problem?

  (3) have you made recent changes to your system?

  (4) you get a specific error?

  (5) you have security software installed on your system?

  Disconnect external devices and try to shut down the computer

  Try to start in safe mode and try to stop

  Step 1:Boot in safe mode.

  Follow the steps and check if you're able to get into safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode If you are able to stop in safe mode, and then perform a clean boot.

  Step 2: perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Check if the problem persists.

  I hope this helps.

• computer Vista laptop will not be closed and not close some pages will say there was a problem of hardwear too

  the net does not very well and immediately said still in the corner with errors

  Hello
   
  Try to turn off the computer by disabling all programs not Microsoft currently running on the computer and check the result. To do this, try the following steps.
  Step 1: Read the following article and follow the steps mentioned below to find the culprit that is causing the problem: http://support.microsoft.com/kb/929135/en-us
  1. follow "step 1: perform a clean boot ' to disable all non-Microsoft services. Restart the computer, and then click shut down the computer to see if the problem persists.
  2 If the problem does not persist in the boot, try "step 2: enable half the services" to "step 6: resolve the problem" to find which is the origin of the problem. When you have found the culprit, uninstall it.
  3. follow "step 7: reset the computer to start as usual.
   
  Step 2: Restore Internet Explorer settings.
  1. Click Start, type inetcpl.cpl and press to enter.
  2. click on the tab advanced and then click Reset.
  3. click on reset.
  4. When you are finished, click Close, and then click OK.
   
  For more information, see this link: http://support.microsoft.com/kb/923737
   
  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  Return message details, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• My labtop will not be closed to the right.

  My laptop will not be closed down to the right, the power button works, but the close menu button start menu is not, he will tell disconnected for a short time then say stop for a few seconds, then the screen and the power button will go black but then 3 other buttons start flashing and it lights up immediately I tried the msconfig method and when I press OK it asks me to restart my computer, I have windows 7, please help.  I also tried system mechanic, and I have no virus.  If more details are needed on my laptop please ask.

  Hello

  1. do you get an error message/code?

  2. you made any hardware or software comes to the computer before the show?

  3. What is the brand and model of the computer?

  Method 1:

  Disconnect all external devices connected to the computer except the keyboard and mouse, and then restart the computer. Check if the problem persists.

  Method 2:

  Run the troubleshooter of performance since the link and if that helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3:

  Download and install the hotfix from the link:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Also check the link for more information:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

  Hi David,

  1. what exactly happens when you try to configure Adobe Air?

  2. you receive all of the error codes or error messages?

  If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

  Adobe support

• My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

  My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

  Husband confused,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  06/15 / 1104:36: 37 pm

• My HP laptop will not wireless networks resume. I have an ethernet cable plugged in to get internet.

  I tried to install a network and it will not be the wireless networks list when he worked later than yesterday. My wireless works well because I have other connected devices work correctly. This computer just stopped to pick up the wireless network.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to check if the wireless on the laptop HP switch is turned on. If the wireless switch is off of your laptop will not pick up and wireless networks.

  Method 2
  I suggest you try all the steps from the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also: Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Pavilion dv6-1350us Entertainm: Pavilion dv6-1350 us running Windows 7 will not be closed

  Have not used my laptop for the last 45 days and have not installed anything new. W7, 64-bit running. Just used on these days and it will not be closed. When I stopped it just hangs and displays that says: "if it please do not turn off or unplug your machine. Installation of update 1 of 1 ". This can last for hours.

  I stop it manually with the power button which of course translates message when I start again that «Windows did not close properly»

  I thought that since I had not used the computer laptop or literally turned on for about 45 days, that maybe I was missing a few important Windows updates, but when I go to Windows update via Control Panel and click on Windows Update to search for updates, it "just hangs" it thus, showing never updates available. Last update of the W installed was 26/03/16 and laptop worked OK.

  Any ideas?

  I downloaded ccleaner pro (first edition) and scanned the hard drive. I checked 'fix all issues' and it worked! Whatever files or conflicts on the register or wherever was causing the 'hang up' were eliminated obviously that my laptop was able to stop. :-)

• Z30 satellite will not be closed

  New laptop for my daughter will not entirely closed and seems to be stuck at the stage of closing.
  I tried pressing so that hold power button for 5 seconds.

  It seems to stop even if the power led on the touchpad still slowly flashes orange.
  When you press power button / stop again, the "Stop" screen is still there.

  He did this for more than a half.

  Hi Judy

  As I see that you've marked your thread as answered. Is everything OK?
  If so, send us your short comments please.

  If I m right of your laptop is not switch reset so brief description how it works, you can find on http://aps2.toshiba-tro.de/kb0/FAQ3500560002R01.htm

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• laptop will not print, the problem is PRINTUI. Missing DLL

  Hello. My computer Windows XP laptop will not print, and I found that the problem is PRINTUI. DLL is missing. I have a backup file on my hard drive, but I don't know which folder the file goes to. I have Windows XP Home edition SP2. Does anyone know the correct folder, that this file will?

  Hi, Jtmcc,

  Adding printers without interaction from the user in Windows

  http://support.Microsoft.com/kb/189105

  Is the common path: C:\ System32\ printui.dll WINDOWS\

  What is printui.dll?

  http://DLL.ParetoLogic.com/detail.php/printui