my laptop will not connect wireless

Similar Questions

• Laptop will NOT connect wireless, my drivers ARE up to date

  My Windows Vista laptop, USED to connect to my router wireless very well. Now it won't, it doesn't even recognize that a network is available. I looked for answers and have updated all my drivers on windows suggested and still not connect wireless. My blackberry to connect to my router very well... Help, please!

  Hello

  Turn off the router and the Modem - wait 3 minutes and reverse. Restart the computer.

  Some systems have a power switch on the front or side. If a laptp or a PC that uses embedded
  WiFi check/configuration settings (BIOS/CMOS) as you start - often F2 then warning screen - select-
  boar without wireless/WiFi. If the PC of a kitchen separated and system maps turned OFF and try to remove and
  replacement of the card - in fact remove - do not just tight.

  A manual update or re - stall your drivers by using these methods, do not use only the driver update as
  You must refresh the batteries of any driver.

  Actually try updating your driver and disabling the network logon. Use a wire or download drivers
  on another computer and use removable media to transfer to your system.
   
  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Laptop will not connect wireless

  My Toshiba laptop with Windows 7 does not connect to the internet.  I get the message that the problem lies 'problem with wireless adapter or access point '.  I unplugged and rebooted several times.  Help, please!

  Hi SherryConrad-Proctor,

  Thanks for asking this question to Microsoft Community!
  I understand that you are unable to connect to the wireless network.
  I suggest you to consult the following Microsoft article and check if it helps.
  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Setting up a wireless network: http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
  I suggest you to install the latest drivers of network from the manufacturing site.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• Windows 8 will not connect wireless automatically and sfc/scannow error

  Hey,.

  I have a problem and I hope that some of you may be able to answer. I have a desktop running Windows 8 x 64 which, no matter what I try, just usually don't forget I connect WIFI at home. Every time I start the PC I have to go into the details again once I tried everything (several times), new drivers and virtually all of the suggestions emanating from the research on various forums.
  I say this because when I tried to run the "sfc/scannow" in an elevated cmd, it comes up with an error.

  http://www.Neowin.NET/forum/uploads/monthly_05_2011/post-336322-0-01396700-1305440203.jpg

  Error is the same that above, looking in the CBS.log newspaper he does not mention that it is unable to repair the files of numerours including some relationships Wi - Fi so I don't know whether they are connected or not.

  The wireless network card is the USB - N13 by Asus.

  The wireless works fine on my laptop and my GFs Macbook.

  Anyone has any idea as how to fix WIFI details don't forget not the "sfc/scannow"?

  Kind regards
   
  Jens

  Hello

  I would have you try responses in the thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Also applies to Windows 8.

  We know how it turns out for you.

• Laptop will not connect to the wireless network

  I have a Toshiba laptop with windows Vista, and it does not connect to wireless internet at my father's House. My father and my sister have the same exact computer, and both of their computers work perfectly well. Mine will work with an ethernet cable plugged in, but when I try to connect wirelessly, it does not work. I've never had this problem in my mom's house or anywhere else. Can someone help me please?

  Hello

  This is a security feature of each wireless router I've ever seen, although I wouldn't be surprised to discover that some router didn't do it. You need to check your router admin pages to see if mac address filtering is in effect. Address filtering Mac prohibits access to the router by any unauthorized network device. All network devices have a unique mac address which you can find through opening a command prompt (click Start, then type cmd and press enter) and then typing ipconfig/all. The output refers to your device Wireless 'physical address' (mac address) and will be in the format hh-hh-hh-hh-hh-hh, where hh is a hexadecimal number (A - F and numbers 0-9), dashes are not important and may not be required when you enter your mac address in the router configuration.

  Tricky

• Equium A100-147 will not connect wireless Internet!

  Hello
  For these last months that my cell phone was able to connect to internet, I think I must have downloaded a virus that deleted the necessary drivers for the wireless card to work, it is still all access points, but it does not connect.

  I tried to reinstall the operating system (Media Center) a few times - that didn't work, and now I have some drivers that I got from my computer on a toshiba Web site - they don't work anymore.

  I'm stuck now because I've tried everything I can think of and nothing works, so I hope I can get some good advice on here :D
  Thank you

  Hello

  I really put t understand why the installation of the OS is so hard :(
  You have received the Toshiba Recovery CD. On this CD all the drivers and tools are already preinstalled.
  You insert this CD into the CD/DVD to boot from the CD drive and the installation will begin. After 10-15 min the installation will end and the laptop should be ready for use.

  Then configure the WLan access again (encryption, SID, MAC address, etc.) and enjoy.

• Computer HP laptop will not connect to wrt610n

  Hi all just a quick question, I just bought the wrt610n and made the new frimware update him. My xbox360, girls I have mac HP printer wireless netgear wireless printserver find all the router and connect using wep very well. my HP with brodcom a.b.g./bluetooth wireless card will find the router but when I try to connect to the network in a box just telling me that I need to go into the details to join this network. I click on it and a box comes in asking for username, password, and domain. I have not configured this I have the network key and thought at first, that's what he was going to ask me to but no.

  To check to see it that would work the wireless I have cut the WEP key and it is connected to the network very well. a unit of games on the laptop to connect to my 10.100.1000 and it connected to her fine any ideas

  Thank you

  Mark

  Your HP laptop to work with WEP security on your router, you must create a profile on your HP laptop to your wireless network. As on your HP laptop IEEE of authentication is turned on, which is why its asking you additional connection information. Follow the steps to add a profile on your HP laptop wireless.

  This settings are for Windows Vista:

  Click Start - Control Panel - Network Center and sharing - on Sid left Click on 'Manage Wireless Network' - click on Add - then click Manully Create a network profile - typed the name of your network - security or password Type your security key - click Next - and click on "Connect To" and once you are able to see your network connected to your wireless network , Close all windows an try to go online.

  This settings for Windows XP:

  Click Start - Control Panel - card WIRELESS - make a right click on the "Wireless network connection" icon and click on properties - next to the general tab, click "Wireless network" tab and under "Preferred networks" - click on the Add button - name of sub network - Type the name of your wireless network - and under authentication of network Open, under Date of WEP encryption select - below you must uncheck "the key is provided for me automatically" and under network key and the type of key network confirm your security key and click Ok and click Ok. Once done Click right on your wireless network connection icon and click on view available wireless network - select your network and click on Connect.

  After that, you will be connected to your network and check if you are online.

• My toshiba laptop will not connect to my HP Envy 4500 printer

  Recently, I tried to connect my Toshiba laptop running Windows 8, wireless on my HP Envy 4500 printer. I am trying to scan something on my laptop, I did with the printer before. I have the remote app, and I have connected to the network the printer wireless displays in the wifi of my computer. However, when you try to get the printer to scan, using the option on the printer screen, it says that no device is connected, and to ensure that the software has been installed and this scan to pc has been activated. I opened the application on my laptop, in hopes of getting better results using what it was, but he told me that the printer is offline, if it was obviously on. I'm not entirely sure why the printer doesn't recognize my laptop, even if my laptop recognizes. I spent nearly two hours, disconnection and reconnection, as well as the printer off about three times. I'm about to uninstall the application and try to reinstall, but I'm questioning that results will be better.

  I don't see any other way to solve this problem, because there is no USB port to connect a USB cable don't, like myprevious printer and wonder if it is my laptop, not the printer, which is faulty. It works for printing, when it comes to other devices in my house, but I had problems same impression with my Toshiba before. I tried only with another scanning device: a desktop HP Pavilion Media Center TV PC computer. I'm starting to think that the scanner is broken to only other reognizing products HP and ask any advice to fix this problem.

  Hi AMakkei,

  Welcome to the HP Forums!

  I understand that you can't scan with your Envy HP 4500 to your laptop Windows 8, and I'm happy to help you with this problem of connection!

  To get help, I'll need to know the following information:

  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try go through this guide. A computer"not found" or a Message appears "connection error" during the scanningand let me know what happens!

  I hope to hear from you and have a nice day!

• Want 5540: Blue light blinks and the printer will not connect wireless

  Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

  Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

• LaserJet MFP M277c6: LaserJet MFP M277c6 will not connect wirelessly to my Mac

  When I run HP Easy Start it says that no devices were found.  And when I run the update of the HP Firmware finds it too never unit.  The printer indicates that it is connected wireless.

  My Mac connects to my old Epson printer very well.

  Help!

  If there is no printer listed, this means that there is a setting on the network to which the printer is having a problem with. To resolve this please contact your internet provider or one that handles the router and ask them to do the following:

  1. Open all ports.
  2. Select multicast.
  3. Disable MAC filtering/MAC cloning.
  4. Disable the network of comments.
  5. Make sure that the network has a band of 2.4 GHz (gigahertz).

  Please let me know the results after these parameters controlled.

• HP OfficeJet8600 suddenly will not connect wireless to my MacBook

  I bought a HP OfficeJet8600 six months. Connect with the MacBook. Works very well.

  Today, it stopped.  Printer works. Does not connect to the Macbook.

  Makes all bases, reboot etc. No luck.

  Help!

  Hi alissas,.

  Thank you for your answer!

  I recommend the following:

  1. Uninstall the software. Uninstalling the printer software.
  2. Re-install the software from the website online. HP Officejet Pro 8600 series full feature software and driver-OS X 10.9 Mavericks.
  3. Take a look at this post, incoming and outgoing Printer Ports, to ensure that the router is not blocking ports. (If you don't know how to determine this, you need to contact your router company).

  Hope this information helps, and have a wonderful day!

• Laptop will not connect to my home wireless network

  I've had my laptop for a few months and my home network wireless also. My laptop has always worked perfectly until last night, I was in the living room and my phone cut because it ran out of battery. I went to restart, and when I did, NO network could be found, and several others usually appear outside my home network. The wireless switch is turned on and I rebooted the computer several times, I ran the wizards and shooters of boredom, I started the wireless zero configuration, but nothing happens. everything he says is "wireless networks could not be found", and when I click on the message, a black box appears with a message saying "windows has encountered an illegal instruction. I don't know what to do. my laptop model is a Sony Vaio, but that's what I know. My ipod connects to the wireless perfectly, so I know its my laptop that needs fixing.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Aspire laptop will not connect to the wireless printer, he said: he can't communicate with the printer

  I have a laptop sucks and when we first put in place it would print to the printer wireless, but now he says that he cannot communicate with the printer. I know just enough to get me in trouble with computers. Any suggestions?

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. which version of the Windows operating system is installed in the computer?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you use Windows 7, then I suggest you to go through the steps in the link and check.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• My Windows XP laptop will not connect to my wireless printer or other computers.

  I have a home network, an xp connected to a router, an xp the top with wireless and a wireless printer.  Until recently all worked OK.
  My the top now connect not to do anything, not to the printer, the top or the i'net.  In network connections on the top, the network connections icon has an X on it.
  I tried several methods but still cannot connect to the the top.
  Any suggestions?
  Richard

  original title: Windows XP Home network

  Hello

  1. what exactly happens when you try to Internet or printer via a wireless connection?

  2. you receive an error message?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1:

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot a network home in Windows XP: http://support.microsoft.com/kb/308007

  Method 2:

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Hope this information is useful.