My logitech keyboard will not work and its new brand

IM typing on keyboard on screen, I just bought a new keyboard and it won't work at all

The drive itself seems to be OK - but you had some fairly significant problems that CHKDSK has settled, and there are perhaps still benefits from that.

SFC - SFC System - Instructions
Click the Start button
type in the search box
CMD. EXE
Right-click on the single file that is

Select run as administrator
-the elevated command prompt window should appear
At the command prompt, type

SFC/SCANNOW

and press the Enter key
 
Wait for that analysis at the end - make a note of any error messages - and then restart.

Tags: Windows

Similar Questions

  • Satellite 200-170-keyboard does not work and the keyboard stops working

    My U200-170 2.5 years, I have the following problem:

    When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

    Thank you

    AJAN

    Sounds like keyboard problem.
    The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
    But one thing is really strange; the yellow exclamation mark in Device Manager

    Eventually it s only a problem of software in such a case, a system restore can be useful...

    Have you checked if the keyboard works in the BIOS?
    Do this!

    If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

  • I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

  • now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

    Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

    Here are the current models of Brother products which are supported.

    http://support.brother.com/g/s/ID/OS/Macintosh.html

    If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

    Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

  • I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

    I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

    CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

  • 13 elements will not work with the new camera, it will not be updated raw 8.7.1

    13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

    Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

  • Satellite keyboard is not working and flashes the command prompts

    Hello world. I hope someone can help... my laptop has suddenly decided to some how turn off the keyboard. No key does not work. The touchpad mouse seems to work very well. Started once w7, a lot of windows boxes flickers between them. Command prompts to do the same thing and I cannot click on any admin agrees with the cursor ect.

    He will not simply accept. I tried the system restore ect but cannot place orders, when similar probs in Device Manager. For example, the cursor jumps oddly at the bottom of any list that I pull up and I can't ride him. The same things happen with another hard drive in the laptop. I scanned with several brands of security too... clear at all. IM wondering if its hardware, not software.

    I even re formatted the hard drive of w7 since another laptop and started again but still the same thing. I have also attached another keyboard to the live system with the same problem. USB keyboards work but still control problems. USB mouse even.

    Thanx

    I understand your question, the internal keyboard does not work, but you can use the external USB keyboard properly... don't you?

    Well, in this case, the question is clear to me: the problem is caused by the fault of the internal keyboard.
    From my point of view of the few he has no alternative option but in order to replace the internal keyboard.

  • The Tecra A2 keyboard will not work

    When I turn on my pc the keyboard does not work! Usually, I have to turn off and on again several times until it is operational.

    I checked the Device Manager and there is no conflict of interest.
    Help, please! Very frustrating!

    Hello

    I agree with chain. If you can not use the keyboard from the first moments when the laptop starts it is probably a hardware problem. Try it also with the external keyboard.

    It will be very helpful if you can describe the situation more precisely.

  • Compaq 610 functional keyboard then not work and therefore in a circle

    Good greetings to all members of this forum .

    right, a strange thing, when I turn on my laptop all the keys work fine, then after 3... only 5 minutes from the navigation keys will work. in this case I would restart the laptop, so again, it will work. But also it happens even if I restart it it will not work until the next reboot: s

    I was wondering is - this keyboard or something with my motherboard. OT, I doubt that belongs to software problem? Hope there will be some solution to do this, thank you.

    I have updated the bios to a more recent, but still the same problem. It is now the only one left for me to try to unplug/disconnect internal keyboard and connect an external.  Iwill try it tomorrow, and after that I have come back here to tell the news, I give thanks to you now help a lot.

    EDIT: It works well with an external keyboard (while the internal one is disconnected), now it's only upward on me to buy another keyboard. Thanks to UNIPROG for helping me!

  • Keyboard will not work to start the Recovery Console repair function

    I would like to use the repair feature in Windows XP Professional Recovery Console when starting Onboard or USB CD-ROM drive.  My keyboard works very well to enable F12 and select boot device.  Windows Setup starts and then loads bunch of pilots - looking... but then my keyboard won't work for select 'R' to start the Recovery Console repair.  All this started because I uninstalled a Lexmark printer and it seems that the driver Lexmark LXBTtime.dll lack now but still wants Windows to start.   So now Config\System will not load.  I saw some threads in this forum recommend that my wireless keyboard does not work - so I borrowed a USB wired keyboard - but still the same problem.  Cannot select 'R' - the keyboard light turns off and of course not recognised by Windows Setup.  Any ideas or suggestions?  In addition to the purchase of a MAC (it was my suggestion of neighbors :-)   Thanks for the review!

    Hello

    In addition to the suggestion of Daavee I would also ask you try another disk of Windows XP installation and also you can try with a keyboard five General PIN and check.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Transparency will not work and Aero is dead.

    My transperacy does not work and Aero can not identify the problem, I tried web help, but it does nothing.

    The computer is a laptop DET also, so I'm not admin > it has struggled to update virus protection.

    The "computer technician" at school can't do anything to help me.

    Hello Cherries_13,

    Thank you for the question!

    I'm sorry to know that have problems you with transparency. . As I understand it the function Aero does not work properly in the computer.

    Run the troubleshooter and check.

    Open the Aero Troubleshooter

    Answer to us if you are having problems with Aero or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • Please helpppppp that will not work in my new acer recovery management disk

    Hello

    I have acer aspire laptop E1 - 531 and it don't boot.i lost all data and has never created a recovery disk

    I have contact the Acer support team and they sent me some recovery disks

    I put in to cdroom hdd and seems ok

    When slect type option is in fact asking, I see 2 possibilities, but there is nowhere to click to start the process

    only, I can click on the exit option

    so do not know what to do?

    Help, please

    see you soon

    The best thing to do is a USB to SATA/IDE adapter. It will allow you to connect a standard SATA drive (or even the older IDE type) to a USB port on a different PC.

    It also comes with a power supply. This will allow you to test whether a hard drive does not work, and you can even recover data from it. They are inexpensive and very useful indeed!

    Or you can plug it inside a desktop PC using a SATA cable and a SATA power connector.

    If none of the above is possible for you to do, you could ask a friend/family member if they can do it for you, or even ask your local PC store if they can test the hard drive for you.

  • 64-bit virtual machines will not work on the new computer running 64-bit Windows 8


    My new computer running 64-bit Windows 8. I installed WorkStation version 9 and the virtual machines have 64-bit operating systems will not work.

    have you turned on VT in the host system BIOS?

  • LCAT will not - work left for NEW win7 64 bit winxp (lr 3 for lr 3.2)

    I am moved my entire LR cat and system winxp for win 7 system images.  I installed 3.2 on the new system, but also a drobo.  All my images are on the drobo and LR 3.2 is on the internal solid state drive.

    I copied the lcat on an exteran disc and put it on the SSD itself, but when I try to "run" it won't turn on.  I tried to b click on what she and I tried to get into the catalog from LR 3.2.

    My question is does anyone know why the cataglog does not work on the new system?  I tried the newest lcat and saved a week before and the two won't work on the new system.

    The lcat should go into a specific folder, or is there a problem I created by saving it to a portable player of exteran that I'm aware of the United Nations?

    Any ideas or advice would be that popular... Thank you!

    Tony Bynum

    When you have installed LR on the Win7 system it would have created a Lightroom under folder in your folder my pictures. See the attached screen shot. The catalog lightroom to your old system must be put in the Lightroom folder. I use win7 64 bit also, so the default location of the Lightroom sub folder must be the same as the screenshot.

  • AirDrop will not work on the new iPhone 6 s

    The release feature does not work on my new iPhone 6 s 128 GB

    Can you give us more details please? What happens when you try?

Maybe you are looking for