My M4 Aqua rear camera is not available

Can anyone help? My mistake of the camera back. And his camera said is not available. But the front camera is fine and can be used. Can anyone here know the answer?

I can't promise anything, but if there is a system problem that causes these problems a software repair must solve. However, if it's a hardware problem software repair obviously would not solve her and she must be sent to a service center instead.

Tags: Sony Phones

Similar Questions

  • Camera is not available because the SD card is mounted on a PC. Unplug the USB cable to move forward.

    I tried to download pictures from my phone.  She does not quite sure why, but the main problem is I can't access my camera or the photos on my phone now.  I get messages like this:- camera is not available because the SD card is mounted on a PC.  Unplug the USB cable from proceed.  I have tried several things and finally just manually disconnected the cable, but not luck. and now also message as follows:- your content is not available because your phone is used as a USB storage device.   Disconnect the USB to access your content.  Would appreciate help!

    Hello

    1. What is the brand and model of the phone?

    2. have you been able to access (or discovered) files on the computer?

    3. what error do you get when you try to copy files to the computer?

    4 you did changes to the computer, before the show?

    Method 1:

    Check out the following link.

    Tips for solving problems of USB devices

    Method 2:

    Connect the phone to another computer and check.

    Method 3:

    Check if the phone includes settings to disable the USB connection.

  • A1-713 rear camera is not working

    WHY my iconia tab7 A1-713 back camera is not working do not? Only the front camera can I use... Please help me

    Unable to swith camera backpack... Only use the front camera

  • Camera not available in 6.16

    Hi all

    After the update of Skype to the latest version 6.16, two problems have occurred:

    (1) camera was not available for use and after reinstalling its driver.

    (2) everything was ok, but after about 15 minutes to speak, the view of my camera in Skype my friend just stopped. It happened several times and I'm really be annoyed.

    Before the upgrade, the unit worked perfectly.

    Please, help me!

    Problem solved. I had both the device drivers installed (I don't know how and where this extra came). I uninstalled one of them, then changed in Skype preferences. It worked

    Thank you very much for your help!

  • Error! Camera not available!

    My phone frequently returns a message "error!" Camera is not available! "at the opening of any application that uses a camera. In this case, especially when applications that analyze bar codes them are used ('AT & T-Scanner of Code","OK Scan"), but not exclusively. Among the applications, bringing the camera to an accident there are some reputable, like for example "perfectly clear." In emergency mode, the camera works OK.

    The question is the same as in this thread for Z1, but it disappoints me that the same thing happens to Z3 which is much more recent.

    Support advised me to erase the data from the camera (Applications menu) and restart the phone. This helped a lot, so it is advisable to reset the phone to factory default. I did it twice, cause from the first time I've found exactly what apps has caused the problem. It took me a day to put everything back in the original state .

    Subsequently, the camera has been blocked by 'Perfectly clear', a decent application written by a "best programmer." I was depressed.

    However, there is a solution: the simple clearing of all applications running in the background (['three permanent key down' |]) "two rectangles | (all erase], or [an icon with a green brush]). This allows without rebooting.

    I hope that Sony issues a correction for analogue to this post for Z1 Z3 as soon as possible.

    IT FIXED! problem with the camera not available error AND flashlight missing has been resolved by installing the new camera. It is a HARDWARE PROBLEM, not a software problem. Clear your cache all you want, it won't help. Removing applications will not help. Physically change the camera worked. Although the factory seal is gone so now it is probably more waterproof.

  • Rear camera of the iPhone does not

    Hello

    I use Iphone black 5s and it is still in the warranty period. A few days ago, I updated ios 9.3.3 . But after that the back camera does not work. even the Flash app when to switch on the camera app, it's totally dark.but front camera works properly. even when switch to the rear camera, the upper left corner with traffic sign says "iphone must cool before you can use flash"

    I restore the phone, downgrade the software, the hardware reset but nothing helped.

    Please advise me on this

    The battery or other parts of the phone been replaced recently?

    That your phone is still under warranty, do verified by Apple or an Apple authorized Service provider near your place.

    Launch a service request

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

  • Portege Z20t: No available rear camera

    Applications of the camera "Camera" and "TruCapture' on my Windows 10 Z20T B2112 do not offer the rear camera, only the front webcam.
    No idea how can I fix? Is there a specific driver needed?

    Posted by coyanis64
    Applications of the camera "Camera" and "TruCapture' on my Windows 10 Z20T B2112 do not offer the rear camera, only the front webcam.
    No idea how can I fix? Is there a specific driver needed?

    I have the same problem on Windows 7 64 bit. I can see the cameras in Skype, Acrobat Pro and MyCam - FHD and 5 M, but the camera of 5 M (rear) shows a black image. There is no error message in the Device Manager. I even tried to roll back the driver RealTek previous, but that did not help either.

    I called Toshiba tech support. The good news is that they answered the phone immediately. The bad news: they suggested initially to install the Toshiba Webcam application (which does not work even with the rear). On the second call to support they have suggested that it is a hardware failure and take the z20t it to be repaired. They have not test if they have a z20t with a rear camera to work.

    Anyone who has ever managed to get a picture of the rear camera?

  • I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

    I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

    Hi Bobsirkus,

    The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

    Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

    You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

    Kind regards

    Tanuj

  • camera raw filter is not available

    I tried this Setup plugin Camera Raw update

    installation of Camera Raw 9.1 update

    as instructed, I should be able to convert a smart object layer.

    then be able to apply a camera raw filter...

    but... the gross assets of camera / filter is not yet available.

    In addition, bridge cc 2015 - the option open in camera raw is not available...

    Why?

    why I can't access these filters... in photoshop and bridge?

    Thank you

    I restarted my iMac...

    and... It seems that this time, the Raw filter / gross assets are available...

    Thank you for watching this...

    Jack

  • I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The message says not available ove

    I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The preview not available for this DSC - ARW file message says. Whatelse should I do to see my photos? Can anyone help?

    Anita

    Support for the camera has been added in the latest version of Lightroom, version 5.7.1. After you download Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom does not use plug in Camera Raw. You must ensure that you have updated Lightroom to the latest version in order to have support for this camera.

  • Camera Raw Version 7 - LR4 want PS to have, but it is not available

    Since Lightroom 4 upgrade, if I try to edit a photo in Photoshop inside LR4 5.1 it warns me that I could use Camera Raw Version 7 for compatibility.  But the camera Raw Version 7 is not available for Photoshop - latest is Version 6.6, which I already have.

    For already processed in LR3 process 2010 photos I just say 'still open' and I don't think that at all, there are no compatibility issues.  But if I start using the process of 2012 and then try to change a raw photo in Photoshop, I presume that there will be a compatibility problem.  So I haven't started using process 2012 while you wait for Photoshop 5.1 CR7 is available.  But when will it be available?

    I have not seen any information from Adobe on this.  Since the process of 2012 is the default value for the new photos not yet affected by the 2010 process I think there must be more people just fall on this issue.  Why Adobe is so silent on this subject even after LR4 went public and is shipped? (I want to tell to shut up is helping him to research and support resources don't have any mention of the issue or the date of the resolution).

    cognitive93 wrote:

    Similarly, I'm cautious about starting of the ' have Lightroom do the rendering "-not being not not completely sure, that's exactly the same as the PS did for himself.  But this may be completely unfounded conservatism my part - is that do really identically without creating problems future or unwanted side effects?

    Yes... you must use LR to process the image in Photoshop, until you upgrade to Photoshop CS6 and 7 of ACR.

  • Front camera is not working on Samsung Android

    Hi all

    Try to solve this problem - about 3 days ago the front camera has stopped working on Skype. I use Skype every night and never had this problem before. The rear camera works fine but not the front camera.

    There is only a problem in the Skype application. I am able to use other services of video calls without any problems.

    I tried to upgrade to the latest version available (6.15.0.1126), but it has not changed anything.

    Maybe he auto update to cause the issue? I see the other comments on the page of game google saying they are experiencing the same problem but that you haven't seen all the messages here about it.

    Is there something I need to do to make this work or is it a bug?

    Yes, there was bug fixes that would switch of the camera. I'm glad to hear that it works better for you now.

  • 6 s iPhone front camera does not work

    Anyone know why my front camera of the iphone 6 s does not work?

    The rear camera works fine, but when I turn the secondary camera, first he showed a blurred image of rear camera and then next I can see, it's a cliché of the last capture of the rear camera (which automatically captures). Is - this problem is hardware or software? I never drop my phone, but have just updated from multiple applications. I tried several solution by resetting the phone, restore to the original (new phone option) and none of them works for me. Bought the phone 2 months of the United States.

    Sorry, but if it back to factory settings without using the backup data did not return the front camera function, you need to get the phone repaired, your camera is still under warranty.

    If you are outside the country of purchase, you will need to bring him back to this country, for an iPhone warranty is valid only in the country of purchase, and Apple is not delivered at the international level.

    Launch a service request

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

  • Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus

    Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem

    You see a black screen or a closed lens

    If you see a closed lens or a black screen when you open the camera app, try the following steps:

    1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
    2. Force the application to close, then open the camera again.
    3. Restart your device, and then open the camera again.
    4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

    Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  • After printing a page, when I try to print again it says print function is not available

    I have a Canon MG6250 connected via USB. I run Windows 7 with all latest updates and the version of Firefox is currently 38.0.5. Since some time, probably about a year, starting after a new version of Firefox, I think, I have problems printing. (Sorry I don't remember which version it started happening.) Unless I'm waiting for the printer to prepare completely, although the print dialogue box appears and I click on print, often (not always) nothing happens. If I try to print again I get a pop-up window indicating that the print function is not available. If I then close Firefox and try to restart it, it tells me Firefox is already running. I have to put an end to its process through the Task Manager. Often, I want to print from several tabs already charges with the pages to print. Even if I managed to get the first tab print, somewhere along the line the same thing often happens: before I printed the tab page from the last I get the box pop up again and I have to end the process of Firefox to make it work again. I can generally prevent his happening if I monitor the activity of the CPU of my computer (via System Mechanic) and make sure that all activity ceased after printing a tab until I try to print on the other. This makes printing of desperately slow Firefox!

    I don't have any problems printing of any other application.

    Note that relatively recently, due to a failure of the system disk, I reinstalled Windows and all my software. I was hoping that a by-product of doing this can solve the problem with printing from Firefox, but it didn't.

    I would be very grateful for a solution to this problem.

    I continued to use IE with no problems printing. But then after Firefox 3.0 came out I gave it another go - and the problem seems to have been resolved. No matter how much time I spend in another tab and select print, it behaves as it should. Thank God - Firefox is so much better than IE.

Maybe you are looking for

  • Hide the splitter bars

    I know that you can't have transparent separator bars. But, I have a X Control which is set on a scale with the pane. When he grows up, things work just fine, but the splitter bars extend and it is horrible. Any suggestions? Maybe some sort of decora

  • execution time varied in image processing

    Hello I designed a vi to process the images eyes and calculate its Center. However I seem to be getting various run time sometimes 100 ms sometimes > 200ms. I used the structure of flat sequence and timers to measure the runtime of the vi. I had a fe

  • Cannot open the folder. No error message. Name too long?

    1. I'm not be able to open a file of some 2 nor can I rename, see its properties, etc.. When I right click on it, all of these options are missing. Only "open, explore, search,...) But even that didn't work. 3 - the folder is created by a download ma

  • Product key problems

    I had my laptop hard drive crash. The laptop came with Vista Basic but without recovery or any disk system. For the original Vista product key is on a sticker at the back of the laptop from Microsoft. I bought a Vista Ultimate upgrade and installed.

  • Hi, chrome works on my windows 8 (dv6) more used. He worked for the first few days, but crashed.

    He re - installs fine, but never its stats when I click the icon. Please how to fix this.