My Macbook Pro won't let me put my password, after it has been locked in icloud

Hello.

I have a Macbook pro to the end of 2013. I locked using icloud with a four-digit code. I forgot the code and had several attempts trying to remember her and now I think I found it, but it won't let me put the code in another attempt. the message on the screen says 'wrong password. try again"but there is nowhere for me to try again. someone can help me. I tried to start upward into recovery mode, but she still needs the code for it, and when I get it it takes me to the screen locked again.

Hello

You will need to contact Apple to unlock your Mac: https://getsupport.apple.com/?caller=psp & PRKEYS = PL104

Tags: Notebooks

Similar Questions

  • my laptop won't let me put a password, he said: error 0 x 0

    He said: error 0 x 0

    Hi well I just turned on the morning tried to put in password wouldn't start of restoration did so, but still not clearly cannt problem gets a list of back to back to an earlier time

    Hello

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    And this is the Information from Microsoft on the problems of passwords;

    You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    Malware can also cause problems with passwords:

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See you soon.

  • I forgot the security questions and it won't let me put rescue email

    HI, I forgot my security questions and it won't let me put a rescue emai. What should I do?

    You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

    (143279)

  • In early 2011, MacBook Pro won't start

    In early 2011, MacBook Pro won't start

    Is-ti connected? Fully charged?

    Give us some facts!

  • MacBook Pro won't start - runs in a loop

    Hi guys,.

    After a few days trying to figure this painful problem, I am at the end of my home and hope someone can help.

    I have a 2011 MacBook Pro, which has recently started having problems to start. During a game session (SIMMS), he all of a sudden to stop and refused to restart, and since then I have been unable to use it at all. The MBP has a new installation of El Capitan on it, but it has been working well for the past two weeks since the installation.

    I tried the safe mode, mode of recovery etc, but it would not boot in any of these either. Finally, I put it target mode and reloaded El Capitan of another 'companion' MacBook Pro. This process went smoothly.

    After loading it, I started from the MacBook to make sure that the operating system works OK, and it was 'companion '!

    I restarted the "Companion" MBP and ejected the defective MBP and tried to restart it normally. No go, would not even boot even with the new OS.

    I tried a number of things so he can begin as a result of this new facility, but all that happens is that he'll do the Apple Logo, try to start, stop, and then go around in circles.

    Finally you will stop on the gray screen and the fans will start and keep running.

    I'm at the end of my knowledge, so any advice would be welcome!

    Thank you

    Have you tried SMC and NVRAM resets?

  • Tor Browser won't let me set master password

    Tor Browser won't let me set master password

    Thank you FredMcD for your time and effort. I spent all morning going through the number of entries in the link you provided. Unfortunately, none of them could solve the problem--directly.

    However...

    I learned so much about all the obscure and esoteric settings available and how to handle that I was able to synthesize a solution intuitively:

    • First of all, I carefully removed all traces of Tor with an advanced uninstaller.
    • After reinstalling, the browser made his usual routine of Premiere and opened.
    • An information bar first time upward offered access to privacy and security.
    • I AGREED and unchecked the first box (disabling Private Browsing).
    • The program itself given running and I was able to set my master password.

    Private browsing, but also permanent Private Browsing, can be manipulated, turn it back on, then back to the convenience of the user, according to the needs of any particular situation. Note, however, that, under any form of PB, storage and use of password is removed.

    Note that I did all the steps above (and many other things) throughout my diagnosis, but only AFTER I had already started using the browser (by playing and by checking the various options), which I think automatically some of my preferences of profile defined until I could do it manually. Alternatively, it could be a bad installation in the first place (questionable), or a combination of these factors. Whatever it is, it worked.

    Regarding support in Mozilla, I am impressed by the volume and diversity of the information contained here, as well as the good Samaritans like you caring nature. However, almost all the documents that I have met is Firefox/Thunderbird-centric.

    A search for Tor showed very little data and nothing similar to my case. By its very nature, a software like Tor would naturally by default an option like private browsing. But how many people know that it kills so the ability to use passwords? Even if the Tor Project is based on the Mozilla engine, I think that the people who run the project should be implemented their own support system or lend a hand here and may not return the ball to well-intentioned donors like you and your employees.

    But in any case - problem solved, thanks to you and those who, as lend you time and advice to a complete stranger.

    Now all I have to do is to find extra time to monitor these pages so that maybe, someday, I can return the favor.

    O

  • My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

    My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

    It also won't let me select "Exceptions" or "Change master password"

    Thank you

    You can check that you are not Firefox running in permanent private browsing mode (don't remember history).

    • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
    • : Uncheck the [] "always use the private browsing mode.
  • I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

    I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

    Hello Varshil07,

    Thank you for using communities of Apple Support.

    If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

    1. Choose the Apple menu > shut down.

    2. After your Mac stops, wait 10 seconds, then press the power button.

    3. As soon as you hear the startup tone, hold down the SHIFT key.

      You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

    4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

    To exit safe mode, restart your Mac, but no press during the startup.

    OS X El Capitan: start in safe mode

    Have a good.

  • IPhoto to my Macbook Pro doesn't let me play video clips (usually taken with iPhone). I get a message: "Error OSStatus-54."  Anyone know how to fix this? Thank you!

    IPhoto to my Macbook Pro (old version) won't let me play the video clips more (it was). They are mostly of clips to iPhone. When I try to open them I get a dark white page with an error message:

    "Error OSStatus-54".

    Someone has seen this and someone has suggestions on how to fix it?

    It's so frustrating because with most of these clips, that is the only place where I stored them - some clips I get from family members as well... (In iPhoto, I see a picture of the first frame of the clip, but the clip does not play). Even when the new version of iPhoto appeared on my computer, my old version slept and I continued to use the old because I liked it is better (more familiar).  The videos were still on the old version when I got the new version, but they stopped play several months ago. Help! Please? Thank you!

    What version of iPhoto? The operating system?

  • Mid-2015 MacBook Pro won't start every 2 weeks, need to restore from a backup.

    Hello all, big problem, Apple says that it is not material (although I'm not sure), but if not, then there must be some sort of conflict between my installed software and the new model of MacBook Pro mid-2015. Help!

    The problem here is that I've been running EXACTLY the same configuration on a MacBook Pro 2012 since, well, 2012, without any problem. But when I received the new machine in December, I migrated everything on (using Migration Assistant), I have installed a Bootcamp partition, migrated my old installation of Windows on the use of WinClone, and everything was fine for about 2 weeks. This is the same process as I did when I upgraded the machine from 2009 to 2012 also machine well.

    Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

    I called Apple, went to two Apple stores, and we all tried to run disk utility to fix the problem. But every time I find myself with a message "Invalid node structure. The volume could not be completely checked. File system check exit code 8. Updated scores of start-up of the volume as required. File system check or repair a failure. Operation failed... "The topic on this bed,"first aid process has failed, if possible, back up the data on this volume. »

    The idea of first re - install the operating system didn't work... apparently there was a problem with the volume at this point so he would not restore. The next option was to completely erase the partition and then restore the backup. That worked, but then the entire process repeated two weeks later.

    I have been through this process 7 ~ 8 times since December! It seems to happen every two weeks and no one can tell me why it's happening on this new machine, but I have NOT had the problem on the old machine running the same configuration.


    Apple said it might have something to do with execution Tuxera NTFS on Mac (if I can share documents across side Windows). I have not removed... Tuxera two restorations there is no change.

    I also use Paragon HFS + for Windows, because most of my material is actually stored on the Mac side. I have NOT yet removed this (current running Windows 10) because I have NO idea why or how something running on the Windows side could affect the operating system volume on the side of Mac... especially when everything I do is opening and closing things as Word documents.

    I have log files and screenshots (I write below a few... but there are many others). Apple says "it is not a hardware problem" so they won't have to help understand if it's just software. I beg the community to help!

    Here's what I new material:

    MacBook Pro (retina, 15 inch, mid-2015)

    Intel Core i7 2.8 GHz

    16 GB 1600 MHz DDR3

    AMD Radeon R9 M370X 2048 MB

    This graphics card is the NEW one, first, that I do business with AMD

    My OLD machine is:

    MacBook Pro (15-inch, mid-2012)

    Intel Core i7 2.7 GHz

    16 GB 1600 MHz DDR3

    Intel HD Graphics 4000 1536 MB

    Any help or ideas are appreciated!

    Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

    This occurs when the drive Boot CAN get the initial Blob of the software off the drive with the boot loader, but when he tried to mount the disk with the file system, it can not be mounted. It runs a single past of [essential] disk first aid. If the drive cannot be mounted, your Mac can not do something useful, he died.

    If the problem could not be fixed quickly, you should have been advised to REPLACE this hard drive.

    This is what you need to do now and stop wasting your time. A new drive costs less than $ 100 and will solve your problems.

  • MacBook Pro won't feed - need to disconnect/reconnect the battery.

    I have a 'early 2011' MacBook Pro 17 "which does not illuminate when the power switch is pressed.    He worked normally in the last time it was used.

    I'm a PC I / specialist t so I did some fault finding.  Here are the results and measures, I tried:

    1. Power button and no indication button has been pressed.
    2. Button on the side and he said fully charged battery.
    3. Adapter a/c and LED power connector attached LED lights up in green as it is supported.
    4. You press the power button - still no indication of any attempt to power on.
    5. Let Reset SMC pressing SHIFT, control, Option, and power switch.  All released.   You press the power button - still no indication of any attempt to power on.
    6. Power button which is held down for 15 seconds, released, then no hurry once - no change.
    7. Disconnected a/c power.
    8. Removed the back cover.
    9. Battery disconnected from the system board connector.
    10. Connected a/c adapter and power button pressed - no change.
    11. Disconnected the a/c adapter.
    12. Back in the connected battery system board connector.
    13. Joint a/c adapter and the system performed a reset, then IPL upward and ran normally.
    14. System "Shut down" and then press the power button - would not be back.
    15. Removed the a/c adapter and pressed the power button - still wouldn't back off.
    16. Disconnected a/c adapter, disconnected the battery, battery reconnected to the system board.  Power button - will not turn on.
    17. Repeat the procedure which worked previously - a/c offline, disconnected battery system board, connected a/c, press button power (no signs of activity), disconnected a/c, battery reconnected to the governing body of the system, reconnected a/c and it reset and power!
    18. Let system and then "reset" (instead of closing) - it restarts correctly.
    19. Shut down the system and then I tried to power - will not turn on.
    20. Bottom line: it seems that the procedure which will get the system starts, after it is closed: disconnected a/c, disconnecting the battery system board, connected a/c, press power button (no signs of activity), disconnected a/c, reconnected battery to the system board, reconnected a/c and it resets and starts.

    OK, so you MacBook Pro experts out there... what seems to be the problem and what measures would you recommend I take?

    THX,

    Jeff

    Hi Jeffrey,.

    Welcome to Apple Support communities.

    Looks like you did some troubleshooting while trying to solve the problem with your MacBook Pro turns is not on. The article below provides some additional troubleshooting steps that should help you further isolate and resolve service installation or question.

    If your Mac will not turn on - Apple Support

    See you soon.

  • OfficeJet 8500 has 910: Macbook Pro won't find my Officejet Pro 8500 printer

    Until recently, my Officejet 8500 910 has worked very well with my Macbook Pro, desktop computer wireless Mac and iPad.  Now, it will not be printed with any of these devices. Yesterday, he worked with my iPad, but today it says that it cannot find the printer. On my Macbook and desktop computer, it is impossible to find the printer when I try to add.  You can find the scanner and fax part of my all-in-one, but not the printer. I deleted all my printers and tried to add this back.  I've stopped and restarted. I checked that my printer is connected.

    I have same thing happened with a HP wireless printer in the 8600 series to work.  Sometimes he would find and connect.  Other times, it wouldn't. I appreciate all help.  Thank you!

    Hey @Jeanne33,

    Welcome to the Forums of HP Support! I hope you enjoy your stay here.

    I see that your Officejet Pro 8500 all-in-One Printer does not appear on your network. I can help you with that.

    1. As you only use Apple products means that the printer is no longer connected to your network or a parameter has been changed on your network. That being said, this is what we will do:
      Turn the printer off.
    2. While the printer is off, remove the power cord at the back of the router for a minute.
    3. When the lights came on the router, turn on the printer.
    4. Try to print.

    At this point if you are not able to print, then we will do the following:

    1. On the printer, click on Configuration, network and wireless view summary.
    2. If you see a line indicating connected the printer is properly connected to the network. If this is not the case, then, from the main screen, click on Configuration, network and wireless configuration wizard to add the printer to your network. Try once done printing.

    At this point, you should be able to print. If the printer still doesn't seem to add as a device for the Mac or appear on any other device and then you have a setting on the router that has changed. Your best option would be to communicate with the person who is provided with the router and ask them to do the following:

    • Open all ports.
    • Select multicast.
    • Disable MAC filtering/MAC cloning.
    • Disable the guest network
    • Make sure that the router has a band of 2.4 GHz.

    Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

    If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

    If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

  • I have a iPod Classic 30 GB. I have a new macbook pro and I managed to put my iPod, but now I can't synchronize my iTunes to iPod. What should I do next?

    iPod Classic does not sync with iTunes on MacBook Pro.

    If "reset" means you did a restore on it (to erase it), after the restoration, the iPod is set by default to use the parameter manually manage music and videos] .  If you expect not to sync automatically, you need to Sync music.

    Connect iPod and to find his button on the device to iTunes.  The screenshot below shows the left upper corner of the window of my iTunes, iPod button circled in red.

    Click this button to display the settings of the iPod summary screen in the iTunes window.  Along the left side, in the sidebar, under settings, click on music.  Parameters of music from the iPod screen to the right.  Check the box to Sync music.

    NOTE: For anyone else reading this, all the songs of the iPod that are not in your iTunes library will be lost.

    This enables automatic synchronization.  You can choose to synchronize your entire music library or a part of the selection .  Implement this screen as you want, and then click apply to sync iPod.  Further, iTunes automatically keeps iPod "in phase" with the changes in your music library (or the selected part of it), when you connect the iPod (or click sync , if already connected).

    If this isn't the problem, thanks for posting back with additional details about your situation.

  • MacBook Pro won't restart and has vertical lines that go down the scree.

    Recently, my macbook pro to update so I rebooted. To do this, the computer turns on and starts the update but there are lines running down the screen. To about 1/4 of the way through, the screen turns gray, and then shuts down and restarts the process again. I ran a test of equipment and he came without any problem. Is there a way to fix this without going through Apple.

    What model of MacBook Pro?

    Maybe this problem.

    http://www.Apple.com/support/MacBookPro-videoissues/

    Apple Hardware Test is poor to find graphics issues.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • MacBook Pro with the letter N in white on my screen!

    Hello

    I have a strange problem and that there is persistent character display on the screen of my MacBook Pro.  It is located on the left side about 1/5th of the edge left and about 1/3 down.  It is white with grey background.  Anyone know what it is?  I've seen it before and it disappeared on the last update, but came back 2 days ago.

    Can you provide a picture and a screenshot?

    Screenshot for us a see if it's software or hardware, photo, so we can see what it looks like.

    Instructions on how to take a screenshot.

Maybe you are looking for