My MacBook won't start properly...
Hello.
My MacBook Pro (with El Capitan) does not seem to start correctly... I've updated the DIVX program and after that, the pc restarted just by itself (there is no nessage that a reboot was iminent)... However there has been music of reboot, followed by the Apple logo and the loading bar (at this stage there was already something weird... the white color background and distorted)...
After some time of loading this bar, she evacuated, background color standard, but then the pc will turn off by itself (before getting to the part of authetication)... If I turn again the same things happen...
Does anyone know or can tell me one any solution to this? Is anyway to start the pc in safe mode, before that, so I could try to fix it?
Thanks for the help.
Kind regards
Tiago
- For safe mode: immediately after the tone, hold down the SHIFT key for a few seconds.
- for the singleuser mode: immediately after the tone, hold down the command key AND the s key.
- To start with messages: immediately after the tones, press and hold v for a few seconds (verbose)
Let us know what is happening, last 10 or if lines of verbose would be useful if you can intercept them.
Tags: Notebooks
Similar Questions
-
MacBook won't start - completely back screen
2015 12 '' MacBook
My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).
Nothing happens when I press and hold the power button.
Any suggestions before I take it to the Genius Bar?
Here is some information that might be useful.
After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.
However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.
-
I have a MacBook Pro 2011. It does not completely start. A little more to halfway through the progress bar to become white, and it seems to freeze. I cannot start in safe mode, but was able to boot into recovery mode and ran first aid on the hard drive. It looks ok, but still does not start. I was also able to do another backup via disk utility (I think) - last prior backup via time machine was 2 weeks and there are... Any suggestions? The hard drive is faulty?
aktricia wrote:
The hard drive is faulty?
It's a possibility.
Run Apple Hardware Test:
https://support.Apple.com/en-us/HT201257
Note that an error free AHT is inconclusive.
Try SMC and NVRAM resets:
https://support.Apple.com/en-us/HT201295
https://support.Apple.com/en-us/HT204063
Try an start secure;
https://support.Apple.com/en-us/HT201262
If no success, start the recovery partition as you did before.
Run disk utility > first aid again and try to reinstall os x.
If the installation is successful, try a start.
If still no success, make an appointment at a bar of genius Apple store for a FREE evaluation.
Ciao.
-
MacBook won't start or load in single user
Hello. I hope you can help
My sons MacBook primer is more. It happened a day after that that he has uploaded a large number of movies on iTunes. Not sure if there is a connection. It shows a gray bar after typing in his password - stop down after half of the bar is filled.
I tried everything I can find on the forums.
It does not start in safe mode
It will start in recovery mode. Disk utility, says that everything is ok on the hard drive. However, it is also said that it is 100% full of 'other' files.
It does not start in single user mode - gives me the error:
Builduser error (): construction of a user of type 0 error x 20010008
I have reset the NVRAM
FileVault is not enabled - at least the so-called recovery mode
any other ideas?
THX
Brad
You have another Mac, you can use or borrow? You could try booting the Macbook target disk mode and connect it to another Mac.
The hard drive should appear on the other Mac, and you can try to remove some of the films to get about 10 GB of free space on the disk. Then try to start it normally.
Share files between two computers with target - Apple Support disk mode
If you need to borrow one, try to see if the Macbook target disk mode - I don't see why he shouldn't, however.
-
Hi, I have a Macbook late 2009, 4GB, El captain. Since last year it started to slow down a bit, then applications are beginning to freeze and the beach ball are gone and... for ages (in hours) and even if I try to force that, I couldn't because everything has been frozen. So I had to force shut down the computer. Then, after a while, I couldn't start the computer and when I went to recovery mode, disk utility, the hard drive was still there but nothing about this, so I reinstalled from Time Machine. Was OK for a week, then again the same thing. For these last days, everything was ok, restart this morning I could not at all so I reinstall it again from Time Machine. I verifier check with EtreCheck, run first aid and everything seems fine. What is going on? Someone had this problem? Thanks for help.
Why not publish the report of EtreCheck?
-
In early 2011, MacBook Pro won't start
In early 2011, MacBook Pro won't start
Is-ti connected? Fully charged?
Give us some facts!
-
MacBook Air 11 "2012 won't start
My MacBook has been in place and become Finder does not always whenever I try to watch my files.
So I decided to restart and now it won't start, the startup would always freeze in the middle of the progress bar.
I tried:
Repair/check disk + permissions - no problem
Reset NVRAM memory - still does not start
Reset SMC - still does not start
I tried single - user drive is quite well
Reinstalling OSX - cannot run due to 'this article is temporarily unavailable.
And finally, the verbose mode and I am skeptical behind the text following code/orders:
Dynamic code of I080211AWDLPeerManager::configure not support on this device
I080211AWDLPeerManager::getVHtCapabilityIE cannot get the vht ret 2d capabilities
EN1: enable successful "Promiscuous" mode
en0: BSSID changed to XX
Afree mode detailed of these commands would freeze too.
I tried almost everything and I don't want to consider formatting my drive, which can also not let me install OSX for the above mentioned reason. So yes, all my options are gone. It's quite frustrating that came from nowhere and that my options are now extremely slim.
To add my MacBook is no longer a guarantee and it doesn't have the AppleCare.
I'd appreciate any help, thanks!
Reinstall OS X without erasing the drive
HD recovery start: restart the computer after the ring, press on and hold down the COMMAND and R until the menu screen appears.
Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.
When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left. Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu.
Reinstall OS X: Select reinstall OS X and click on the continue button.
Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.
If you have no success with the above, try:
Install or reinstall OS X from scratch
Make sure that you have backed up your files because the following procedure will remove all of the hard drive.
HD recovery start:
Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.
Erase the drive:
1. select in the main menu disk utility and click on the continue button.
2. once the charges of THE select your boot volume (usually Macintosh HD) in the
list on the left. Click on the Erase tab in the main window of THE.
3. set the type of format Mac OS extended (journaled). If necessary, click
Security and button all the option data from scratch in a single pass. Click
the clear button and wait until the process is complete.
4 leave FROM and return to the main menu.
Reinstall OS X: Select reinstall OS X and click on the install button.
Note : You will need an active Internet connection. I suggest to use Ethernet if possible
because it is three times faster than wireless.
This should install the version of Mac OS X that you had installed it.
-
I have a 10 year old black Macbook, which does not start when a battery is installed. If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off. I got a new battery and charge it where the charger turned green, but the results are the same.
Any suggestions?
It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.
http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.
-
MacBook does not start (even in safe mode)
Hi, I have a MacBook pro that won't start. When I turn it on, I hear the ring of priming, but then the screen stays black. I tried all possible troubleshooting recommendation, that I could find on the internet, but nothing makes a difference. None of the startup option keys (start in safe mode, mode disk target, selection of the boot drive, etc.) anything. I can reset the PRAM, but nothing else has even made a difference. All I see is a black screen
Last night, I tried to install another OS in a dual-boot configuration, so I was messing around with partitions on my hard drive. I thought that the worst case scenario, I could always reinstall the OS. Can really break the complete formatting of the hard drive boot sequence? I thought that a hardware failure would prevent me from booting from a USB stick recovery.
The computer is a MacBook Pro 15 "start 2013I think.
Thanks for your time
Command-R works.
-
Error opening of Premiere Pro - "the application could not start properly. (0xc0000142).
Using 10 Windows on a laptop HP with an AMD A8 - 3520M. Already uninstalled and reinstalled does not.
I me evaluate the trial version of this app. So far, I'm not too impressed.
-
The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open
Hi Marcelo,
You may need to check this: Re: Premiere Pro 2015 won't open after the recent update
Kind regards
Navdeep Pandey
-
I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.
Hi Kingsberry and almathof,
Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update
Thank you
Regalo
-
my iphone 6s erased and won't start
My Iphone 6s erased and won't start
Hello
Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:
If your iPhone, iPad or iPod touch won't turn on - Apple Support
-
Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?
-
Equium A100-147 tried to update BIOS, now won't start
I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.
Any help would be appreciated,
Thank you.> I was updating the BIOS on my laptop and now it does not start
It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:
http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/
Maybe you are looking for
-
I can't download apps with a credit card
I need help to download apps with a credit card
-
I need the scanner software & other utilities that came with my m26nw all in one. I can't find in the downloads - only drivers. Can someone tell me if there is place to download utilities to scan or buy a replacement drive?
-
BlackBerry smartphones help me - my 8310 will not support the blackberry app download
Hello After having a bad start to my 1st 8310 I flipped to receive another ebay replacement (2nd hand) logo is O2, but it says that it has been unlocked to all networks by 3, I have a vodafone contract sim card - put it in I tried to download blackbe
-
ViewObject where Clause SET based on logged in user roles
Hello ExpertsI have a view object based on a custom query to get distinct values from a table. My requirement is to display the results as a listview. The listview is is filled without any problem. But I need to add a where clause clause the object v
-
PC only motorized on occasionally.
Hello forum HP I have a HP Pavilion 7625.uk Media Center and its become suddenly very erratic. Green power supply will be LED light at the back of the PC but the PC doesn't appear when I press the power button. If I leave the PC alone for about 15 mi