My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

Could not open the MS Sites

My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

Hello

Please let me know if:

1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

All other websites work well. problem only in trying to gain access to www.microsoft.com

2. What is the operating system that is installed?

Windows XP Pro.

3. are you aware of the physical RAM installed?

1 GB

4 and it meets the minimum requirements of the browser you are using?

For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

Provide answers to the following questions.

a. also mention the name of the operating system that you use.

Windows XP Pro

(b) is there an error message that is displayed when the site no longer works?

trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

c. What is the browser you are using?

Tried it on IE, mozilla and chrome.

I tried to change the size of the memory virtual and also changed to the size of the managed system.

formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

tried to change the physical memory.

Tried with different browsers.

at the top does not a little luck. :(

Method 1: Please visit the following link to change the size of virtual memory

Change the size of virtual memory

http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

Method 2:

See the following links

http://support.Microsoft.com/kb/967897

WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

http://support.Microsoft.com/kb/972034

Tags: Windows

Similar Questions

  • When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all

    When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all, the homepage remains open, but the other page start for no reason at all in another tab

    It's very consistent, he arrives a few minutes? In this case, I suggest this test:

    To find out if one of your extensions is the culprit, could you test mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    Not all add-ons are disabled: Flash and other plugins still works

    After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

    Any difference?

  • Laptop will not load web pages for a few minutes after sleep

    HP M6-1045dx, Windows HP 64, SP1

    After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

    I've tried to follow several times:

    Disabled/enabled wireless adapter

    Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

    Did a clean install of the operating system.

    I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

    Thank you.

    Download and install the latest Intel Wireless driver

    Intel Wireless Driver version 15.2.0.19

    I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

  • LaserJet Pro M201nw: M201nw LaserJet Pro no longer meets the ePrint requests, a few minutes after connecting to the network

    I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.

    I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.

    But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »

    When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.

    Local networking features of the printer such as network printing and web interface do not seem to have any problems.

    I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.

    Anyone else had problems with this printer model?

    Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.

  • After format and install Win XP Home and SP3 why can't open the Microsoft web sites?

    Need help, guys

    I had to replace my HARD drive in my computer. I installed my Windows XP Home SP2 disc. After installation, I used my SP3 upgrade drive and my drive to upgrade to IE8. After you install all my drivers, I tried to get Windows dates and discovered that I could not access the Microsoft web sites. I get Internet Explorer cannot display this page. I tried to find out why this is happening and how to correct the situation, but have not found an answer that works yet. Can someone give me an answer to this question.

    I have another (used) computer that I formatted the HDD installed and on Windows 7 and have had no problems to access the Microsoft web sites on. It uses the same modem cable like the other computer so I guess that everything is ok with my Internet connection. This problem seems to be only with Windows XP Home SP 3.

    Think in advance for any help

    Btk (billy the kid)

    Please do not share in the whole "BOLD". Which makes it hard to read!

    Please check that SP3 is installed:
    Start | Run
    Type:
    winver
    Press OK.
    Also, tell us what you mean by "trying to get Windows dates" since there are two ways to do this!
  • Windows XP Professional installation with SP3 OEM CD applied but updates from the Microsoft web site does not-2011

    August 22, 2011 I just do a fresh install of Windows XP Professional formatting the hard drive. I then applied SP3 for an OEM CD, I bought from Microsoft several years (part number X 14-60166-02). Even if it is now at the level of the SP3, the automatic updates from the Microsoft web site will not work. If I bought the latest version of the SP3 CD-ROM, which will be the same as what I have now, or it will integrate all of the fixes that have taken place in recent years? Thanks for any help on this.

    Run SFC/scannow

    File system (CFS) auditor checks that all the XP files are where they should be, and that they are not corrupt.

    WHY: You want to ensure that the base operating system files have not been damaged or changed.

    How to fix and check the integrity of the XP system files with System File Checker: SFC/scannow

    http://support.Microsoft.com/kb/310747>

    08/22 / 1104:49: 20:00 UTC

  • Cannot correctly display the default Microsoft Web sites text only

    Since "redevelopment" of Windows 10, Firefox cannot correctly display web pages of MSDN, Technet, or most other Microsoft Web sites. All I get is text based websites, no visuals at all.
    There was once a way to have Firefox Web sites meet and pass off as internet explorer or Chrome... has this capacity disappeared or is it the fault of the web programmers at Microsoft screwing around with their code?

    Found the problem...

    EFF privacy Badger blocked MSDN. I reported to EFF the problem, please help everyone in this.

  • Cannot access the microsoft Web site using any browser

    Access Web sites

    Try all 3 browsers... Chrome IE7 and Mozilla. I can't to any microsoft Web site. No problem to do anything else.

    With Chrome... I get OOPS! and an error message. IE7 displays a page similar to AI "browser down" page and just microsoft

    sites.

    Thanks for any info

    I can't to any microsoft Web site.

    Sounds like a DNS issue.   Use nslookup to check.   Use ping n 1 w 1 to attempt to cache a browser search.  Use ipconfig/displaydns to check if the search is cached.   A problem with many Microsoft research is that they have several alias and have very short life values.   It is very difficult to take any advantage of cached searches.  An alternative is to substitute the search using your HOSTS file, but then the IP addresses of host Microsoft tend to be transitory.  In fact, this point suggests something to check first: make sure that there are no replacement of microsoft in your HOSTS file.   Remove them and do an ipconfig/flushdns, if there is.   ; )

    HTH

    Robert Aldwinckle
    ---

  • I can reinstall Windows 7 from the Microsoft Web site free of charge, or I have to go buy Windows 7?

    I have a HP laptop about 3 years. I don't have the disks with it to reinstall.  I have trouble starting up. Best Buys geeksquad says to reinstall windows 7.

    If I can get on the internet can I reinstall from the Microsoft Web site free of charge or I have to go buy windows 7.  If I have to buy that I would be better off to buy windows 8?

    Original title: reinstall Windows 7

    Hello

    Welcome to the Microsoft community!

    You can either reinstall the computer, which means it will have ANYTHING to this topic, or you can do a system restore when it was working fine.

    http://Windows.Microsoft.com/en-GB/Windows7/products/features/system-restore

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01867418

    I hope that the above suggestions work!

    See you soon,.

    Leo

  • Windows Media Player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Web site?

    Running Windows 7 home Premiun 64 x. Click to open the program the message pop up "Windows Media Player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Web site? "that it takes to the site and there is no available media player Windows 7, installed WMP 11 does not work either. Tried to turn on and back on... did not work

    Do you remember the last time that your Media Player worked properly?  You can use the system restore (type it in the start menu to find) to go back on this point.  This restoration takes about 2 minutes and will not affect your files - no matter how far you go.  It simply restores your system files and settings.

  • Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

    My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

    Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

    See if anything here helps-

    How to recover a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    Install and use the Recovery Console in Windows XP
    http://support.Microsoft.com/kb/307654

    See also

    How to Troubleshoot Registry Corruption issues
    http://support.Microsoft.com/kb/822705

    How to fix a missing or corrupt Windows\System32\Config\System file
    http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

    TaurArian [MVP] 2005-2010 - Update Services

  • On the MIcrosoft Web site, when I put my product key, they say that this license is already in use, and I have to ask the manufacturer of PC

    Original title: WINDOWS license

    Hello everyone.

    Ive broke my PAvilion G6 core i5 laptop and now I'm going to change the internal hard drive. How can I use my old license of Windows 7. On the MIcrosoft Web site, when I put my product key, they say this license is already in use and I must ask the manufactor PC.

    I thank in advance for which will help me!

    Hello

    Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

    The COA sticker with the product key is either or in the battery compartment on the underside of the laptop.

    With a desktop computer, it's on the side, the back or the top of the computer case.

    If you have problems with Activation:

    If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

    "How to activate Windows 7 by phone '

    http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

    The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

    See you soon.

  • Lost my copy and I tried to download the iso from the Microsoft web site, but my product key will not validate, pass this message: we had a problem with the validation query

    Original title: error Windows 7 installation files

    I bought a copy of Windows 7 at Tiger Direct on 22/05/2014.  I lost my copy and I tried to download the iso from the Microsoft web site, but my product key is not valid.  I get this error message

    We had a problem with the request for approval.

    FAQ

    See for other directions:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  • Virgins of the Microsoft Web sites

    Hello

    Had a problem with www. Microsoft.com/en-gb/ and other Microsoft Web sites.  The pages would empty.  If I saw the source of the page, it showed what appeared to be good code but it wouldn't display.  Tried it on 3 computers and different browsers and finally discovered our firewall was blocking these 2 sites; optimizely.com & webtrends.com.  Additional troubleshooting led me to below errors in firefox debugging:

    Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at http://245891958.log.optimizely.com/event?a=245891958&d=222980912&y=false&s246309427=false&s246283596=none&s246529070=search&s246325475=ff&s223040836=referral&s244338170=none&s223033821=false&s223082014=ff&n=http%3A%2F%2Fwww.microsoft.com%2Fen-gb%2Fdefault.aspx&u=oeu1407491926997r0.3934455576942528&wxhr=true&t=1407497589057&f=786484282,1502690693,582790519,1500750723,773750047&g=. This can be corrected by moving the resource to the same domain or activation of CORS.

    and

    « NetworkError : 413 demander entité trop l... uest URL path too large - http://ots.optimize.webtrends.com/ots/ots/js-3.2/311121/WT3UxVa6PLti1PApEnatsfzR_hLDxUXjl2XdUKSLIp5FPljsTAQ5hmU0fx9gvmsg3YVt0RR3lOjRvfPIcexYaLvu8Xgj27qF-TEnuYew9WvzjX0-Tz5iJbn1akhrRcaJQZqAWkEYscu_m732k5ket_mjC-Zfkh6e-b4vn_hz4go-...rest truncated"

    The only way I can get the Microsoft Web sites to view is by adding exceptions for optimizely.com & webtrends.com.

    Anyone shed any light on this?  Thank you

    Yes, I can confirm that the areas of Microsoft using WebTrends optimize scripts.

  • Is it possible to download an image (.iso) of the operating system from the Microsoft Web site?

    As I've already bought the computer with the operating system installed on it and apparently I have not received any CD of the OS with it. But I have the ID of the product on the computer... is there a way where I could get a copy .iso of my operating system on the Microsoft Web site?

    Thank you!

    On-site upgrades are not well regarded by some contributors of this forum, including me. However if you want to try, I refer you to this link for an iso download...

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/where-do-i-download-a-new-Windows7-Home-Premium/39547f65-5a91-4608-A439-c4ccaed1de56

    But before you go this route, I would say as you explore the possibilities to fix the problems you have in other ways. Try to publish or questions about your problem and see what happens. You can save yourself a lot of grief.

    Tricky

Maybe you are looking for

  • Firefox, stop working and will not work. If I use another browser like internet explore, it works fine.

    I checked my firewall and firefox settings to be allowed and also checked my proxy settings and don't choose any proxy as advised in your help section. Worked fine yesterday. Now it does not work today. As I said google chrome and internet explore wo

  • Satellite P200 very slow

    We bought a laptop with Vista P200, which was according to the best salemen that he could offer.Now, after working with him for nearly six months, the laptop is slowly. It's as if we were working on a 286 pc. Man, what is this thing slow?He is consta

  • Output of color by the numbers

    Hi, I have problems printing with numbers I created a color scheme and it is gorgeous on screen but when I print out it print it different what Miss me? What do I do? Help, please!

  • MacBook Pro (2013) turns off unexpectedly, full memory

    My macbook pro (2013) Retina has full memory. I want to delete stuff to free up my storage but I can't because there a risk of stuck and close. When he tries to turn it on it shows the apple with the loading bar logo and comes only about 1/4 of the w

  • Example of mode 1 Acquisition Assistant DAQ

    Hi all I'm reading a sample by loop in LabView. I used the wizard DAQ and USB-6009. However, I had a problem. This error occurred in the Mode 'Acquisition' after double clicking on the DAQ Assistant, if I used samples N mode and 1, the value 'samples