My MacPro will not start. I get a gray and white screen. Continues to try to restart, but never done! Advice please.
Care of my MacPro is lower from a previous post. It does not start, but keep train. I get the rope to music if I stop and start again. Advice please. Thank you very much. Allan
Mac Pro (early 2008) (data sheet)
Mac Pro - model: MacPro3, 1
2 3 GHz Quad - Core Intel Xeon processor: 8 strands
8 GB of RAM expandable
DIMM Riser B/DIMM 1
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM Riser B/DIMM 2
1 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 1
2 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 2
2 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 3
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 4
1 GB DDR2 FB - DIMM 800 MHz ok
Riser A/DIMM DIMMS 3
Vacuum
Riser DIMM A/DIMM 4
Vacuum
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en2: 802.11 a/b/g/n
NVIDIA GeForce 8800 GT - VRAM: 512 MB
HH281 1920 x 1200 @ 60 Hz
DELL3007WFPHC 1600 x 2560
OS X 10.10.2 (14C109) - since the start time: 20:27:26
ST3320820AS_P disk0: (320,07 GB)
EFI (disk0s1)
Disc 1 - system (disk0s2) /: 319,21 GB (17,69 GB free) HD (disk0s3)
WDC WD5000AAKS-41YGA0 disk2: (500,11 GB) EFI (disk2s1)
System install disks 1 and 2 (disk2s2) / Volumes/installation discs for systems 1 & 2: 16.11 GB (4.40 GB free) Disc 2 (disk2s3) / Volumes/disk 2: 483,52 (291,34 free go-go) Hitachi HDS721010DLE630 disk1: (1 TB) EFI (disk1s1)
3-1 TB (disk1s2) Dist/Volumes/Dist 3 TB: 999.86 1 GB (328,00 GB free) Prolific Technology Inc. IEEE-1284 controller. Hewlett-Packard HP LaserJet P2055dn Hub keyboard Apple, Inc. Logitech USB receiver Apple, Inc. Apple Keyboard Apple Inc. Bluetooth USB host controller. EPSON USB printer Mac App Store and identified developers You still have OSX 10.5.8? -Try to reset memory NVRAM/PRAM and SMC MacIntel: Reset of the controller (SMC) system management Subject of memory NVRAM and PRAM -Try to start safe mode OS x: what is Safe Boot, Safe Mode? -Start to recovery and repair the startup disk if Lion or higher OS X: on OS X Recovery - Apple Support Otherwise start from the installation DVD and keep the boot disk -If it is repairable reinstall the OSX How to reinstall OS X on your Mac - Apple Support Run the Apple hardware test. You will need one of the original installation discs Using Apple Hardware Test - Apple Support You may have a bad graphics card. The NVIDIA GeForce 8800 GT - VRAM: 512 MB are prone to failure Tags: Mac I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here? I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here? Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default... Maybe this old conversation will help you: Acer asl3600 will not start only get option is F12 and no data on the recovery drive. Hi guys have Acer asl3600 will not start only option get is F12 and no data on the recovery as disc was in vista family 32-bit premium version devastated as being disabled and need for my community work & charity, thought best option would be a recovery disk. Concerning Dennis Hello Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option. Acer definiterly only reinstall to factory settings, new condition. Here is the guide to repair Options using a Vista DVD from Microsoft. If a friend or a work acquantance of yours has one, you can borrow and use it for repairs. http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/ Table of contents If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums. Unfortunately, you have to buy it. Here is a link to it: http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/ See you soon. Computer will not start normally - boots to the BIOS boot screen Hi, today I had problems on my computer and it will not start normally upward. This started happening today. When I turn on the monitor, the HP logo appears on a blue screen (as usual), but then, there are a lot of vertical white lines grouped perfectly on the screen (it's never happened before) he started to arrive yesterday. and when I try to start it, there is just a black screen for a long time and sometimes the system recov appears but it takes SO long to finish so I just stopped and went into safe mode and did a quick scans with Malwarebytes, MS Security Essentials and SUPERAntiSpyware, but they are all come clean except SUPER which came with a few things from tracking cookies... Today, I have scanned a full scan with malwarebytes and it says that there is no infection. can someone help me? I'm at the library atm! Thank you! Picture of the blue screen with lines here: http://img638.imageshack.us/img638/8583/post1278441253416372.jpg also - im wondering how to start with recov disks? I have two drives but only as on slot dvd thing and I know to start upward with her? should I boot with it because the layout is a little down? and I don't have an installation disc windows vista then Yes. Thank you very much! Hello Winston, According to the image that you posted, it seems that the blue screen is a blue screen with the HP logo on the subject. If this is the case, then the machine has not yet reached Windows and is suspended in the machine Power On Self Test. My recommendation for this scenario is to contact HP about what there is something at the level of the material / process/firmware BIOS which prevents the machine to get it to start Windows Vista. Let us know what they have to say. Best regards Matthew_Ha When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions? Hi RudyNY, 1. you have Windows 7 or Windows XP installed on the computer? 2. you receive an error during the process of loop? 3. did you of recent changes on the computer? 4 when was the last time it was working fine? Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration. http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx A description of the options to start in Windows XP Mode Back up the hard drive to SeaGate. Mac replaced due to lack of hard drive store. Everything again restored hard drive. Launch of Adobe products. Error 1, product needs to be reinstalled. Uninstalled Photoshop and Dreamweaver. Tried to reinstall the update at the top of the screen icon. Try to run, then disappears almost immediately at the dock bar. Cannot access the programs. Any ideas? Tell everyone you know who owns a Mac, including Apple employees... Migration of Mac and Time Machine NOT FUNCTION correctly with the Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies Sign out of your account... Uninstall... to run vacuuming... -non-Cloud programs, to disable the service before uninstalling -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall) -using the vacuuming after uninstalling and before reinstalling is often necessary -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -Restart your computer... Sign in to your account... Reinstall - and 5 steps in response to #1 https://forums.adobe.com/thread/2144928 Satellite Pro L300 will not start - cannot get into the BIOS Dear, I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following: Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process. Help, please. > stop boot on Toshiba logo process Remove one of the modules RAM (check both) and try to turn on using a single module of RAM. It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure Creative cloud will not start. Get errocode 1 Creative cloud try to upgrade. After 2%, I get the error code 1. Failed to contact server. Hi Svein,. Please check the help below document: Error: "unable to install". Creative cloud office Kind regards Sheena Gateway MD series laptop Vista OS. I tried to install disks system recovery, ordered the bridge. The machine do nothing, black screen, no prompt, no way to install the OS, no start upward Hello did you put the dvd player must be 1st in the boot order to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu Change boot order it do dvd drive 1st in the boot order http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/ _______________________________________________________ If you have problems with the process of recovery of manufacturers, contact the manufacturer It's their recovery process not microsofts When I want to use photoshop or lightroom, he tells me to uninstall and reinstall the programs. When I try to uninstall, it says it could not try again, but it does not help Ihis is the 3rd or 4th time you me helped and now I want a permanent solution to the problem. Ruben, please see: Configuration error. CC, CS Computers button just flashes and the computer will not start Computer on button just flashes continually and the computer will not start. I unplugged everything and put it back together. Same thing. Nothing. Monitor is on, but nothing on the screen, of course, because the computer does not start at the top. Computer on button just flashes continually and the computer will not start. I unplugged everything and put it back together. Same thing. Nothing. Monitor is on, but nothing on the screen, of course, because the computer does not start at the top. Hey Bowers you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard otherwise, it would seem that you have a hardware problem Contact the manufacturer of the computer or a local reputable computer repair workshop Walter, the time zone traveller HP Pavilion DV6-3060em will not start Hello! Today I buy new USB mouse (Logitech Gaming G100s) and my laptop does not start. I turn on and the screen is black. Everything is OK, when I unplung this mouse, it starts normally. Somewho can help me? Thanks, sorry for my bad English, I'm Slovenian. Dear customer, Welcome and thanks for posting your question on the Forum of Support HP According to the message that you posted, I suspect that this could be due to the recent changes are applicable Please perform the steps to solve the problem below: Step 01. Turn off the computer Step 02. Turn on the PC and keep pressing the F8 key Step 03. Select "Last known good configuration" in the list of the early start Option Note: Wait until you get to the Windows desktop Step 04. Please remove unwanted startup items and uninstall unwanted applications Step 05. Please reboot / restart your PC normally Hope this helps, for other queries in response to the post and feel free to join us again * Click on the star of CONGRATULATIONS on the left to say thank you *. Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem. Thank you K N R K Although I am an employee of HP, I speak for myself and not for HP CPU on HP p6130y will not respond unless I have unplug and reconnect. CPU will not respond unless I have unplug and reconnect. The power light turns on but the screen remains black. Monitor works. Sometimes it will come around after a disconnect - reconnect. This morning I had to unplug and reconnect six times before would respond to the computer. HP model p6130y. AMD Phenom 9750 Quad Core processor. Windows Vista. 23Scorpio wrote: Hi old_geekster and thanks for your reply. I tried to find a site that has the power to my computer and I'm having no luck. Same HP does not list that they carry the power supply for my p6130y. You have no idea where I can get this? Do you know how much it costs? Thanks again. ___________________________________________________________________________________________ 23Scorpio, it's my pleasure. You should be able to use any standard ATX PSU in the computer. I suggest to measure the current PSU and comparing measures that you choose. I like Corsair and OCZ. The PSU is the backbone of the computer, it is not the place to save money. Both in the links I provided are good examples of what you can use. Read the reviews to see what users have to say about them. If your problem is solved, please click "accept as a Solution. Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder. Thanks Jerri If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode: https://support.Apple.com/en-us/HT201462 Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port. If the HARD drive is recognized, you can copy the data out of it. Ciao. Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem? It would be helpful to post what the screen says. -Try to reset memory NVRAM/PRAM and SMC MacIntel: Reset of the controller (SMC) system management https://support.Apple.com/en-us/HT201295 Subject of memory NVRAM and PRAM https://support.Apple.com/en-us/HT204063 -Try to start safe mode OS x: what is Safe Boot, Safe Mode? https://support.Apple.com/en-us/HT201262 -Start to recovery and repair the startup disk OS X: on OS X Recovery - Apple Support https://support.Apple.com/en-us/HT201314 -If it is repairable reinstall the OSX How to reinstall OS X on your Mac - Apple Support https://support.Apple.com/en-us/HT204904 -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data. How can I stop the automatic downloading of exe files before you see the size of the file? When I click on a link of file (for example "setup.exe" or "Setup.zip") of a Web site, on what it asks you where I save the file and indicates the size of the file, but the download has already started in the background before I clicked Save. I have Satellite A500 - 14L where can I find drivers for XP? Hi guys I am looking for drivers for Satellite A500 - 14L and Windows XP. All an onkow where I can find they? Thank you very much How to send strings on a LAN TCP/IP N/W I want to send information to the string on local networks that can be consulted on Hyperterminal in PCs on the N/W Pls help me Taskbar lost with new background I have Win 7 Pro, run Chrome and Outlook, I loaded a new Microsoft background theme. Everything goes well until the screen goes to sleep, when he wakes, I have no taskbar, I start but no taskbar. If I restart, all is well. But this means that I might SG300 security problem for the Switch I think it's a security risk to have a port configured as anything other than access if it's only to be "dumb" connected hosts (printers, workstations, etc.). So, I usually only assign the VLAN management as the PVID of a trunk port that goes to a sSimilar Questions
http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html
In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.
This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.
It is possible that one of the RAM modules is defectiveMaybe you are looking for