MY mail server hardisk full so cannot start services & also unable to access the mail server

Similar Questions

• Cannot start (Service event log)

  While planning to try a task sheduler task, I have been informed a necessary service work not (event log). On trying to start the necessary service (event log), I received the following error message. {Cannot start service on Local, specific error 126 computer event log module cannot be found.} I was online looking for a solution without success, would appreciate any assistance to resolve this problem.

  It's me, George. I solved my problem with a little help from Microsoft.  The solution is simple for those of you with the same problem.  Rather than search the web and the Microsoft Web site, I simply clicked on my "Help and Support" icon on my desktop and entered in the same query.  This time, I got a response that actually question my problem even though she warned that she could apply to XP.  It was for Windows 2000, but I tried anyway and it worked.  The cause of the problem is a DLL missing from the Windows\system32 directory, a file named "eventlog.dll.  It is still on your computer in a different directory, so all you have to do is a search under the road you have installed Windows on this file and copy it to the Windows\system32 directory and everything should be fine.  It's as simple as that.

  I hope this helps all who can be soon _ trying to correct what I tried to correct for the past three days.  Good luck and may the force be with you.

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• Error "Cannot start service bluetooth stack" whenever I restart my computer.

  Original title: I have Windows 7 and have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  I have Windows 7 and you have a "cannot start service bluetooth stack" error message whenever I restart my computer.  Can you help me solve this problem?

  Hello

  You did it all changes before the show?

  Method 1: Manually start the Bluetooth service.

  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click on apply and then click ok.
  e. check if the problem persists.

  Method 2: Put the computer to boot and see if that helps:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos

• Data source cannot be created: [MapperConfig] unable to add the source of card data.

  I get this error:
  * The data source cannot be created: [MapperConfig] unable to add the map data source.*
  
  While following step 2 of the installation Demo MapViewer tutorial.
  
  I have the BI server installed on a machine and to implement the demonstration on a data schema database RAC.
  
  I managed to configure the connection via OIC and TNS Planner,
  but now when I try to add, OracleAS MapViewer Admin, data MVDEMO source I get this error.
  
  I use:
  NAME mvdemo
  BASED ON: TNS is selected
  TNS name: ORCL_TAF
  User: mvdemo
  Password: mvdemo
  # Mappers: 3
  Max connections: 100
  
  Thank you
  Marco

  Hi Marco,.

  I had the same problem with the MapViewer and a RAC.

  You define your data source in the MapViewerConfig.xml? You will find this XML code under: j2ee/mapviewer/applications/mapviewer/web/WEB-INF/conf

  If so, you need to restart your OC4J Instance with the option "-userThreads. You can do this in the properties of the server administration/mapviewer/unter EnterpriseManager or with the opmn.

  So, I think, you have first to define your data source in the configuration file. Otherwise, it does not have with a CAR.

  I hope this helps.
  Andrea of CU

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• I'm unable to access the Web site rewards club mail

  I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE

  Hi BrianSheridan,

  1. what happens when you try to connect to the site?

  2. you receive an error message?

  3. what web browser do you use?

  4. what version of IE are you using?

  5. are you able to open the Web site in the other computer?

  If you use Internet Explorer, then perform the following troubleshooting methods:

  Method 1:

  Optimize Internet Explorer, and then check how it works.

  Check out the following link to optimize Internet Explorer.

  How to optimize Internet Explorer

  Note: This article is also applicable to Internet Explorer 9.

  Method 2:

  Also perform the following troubleshooting steps.

  Can't access some Web sites in Internet Explorer

  Method 3:

  If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.

  Some sites Web may not behave as expected in Internet Explorer

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Unable to access the store using the proxy server.

  I'm in Windows 8. I'm unable to access the app Store. He said:-"we were not able to connect to the Store.This could not have come because of a problem with the server or the connection network has expired. Please, wait a few minutes and try again.and some other applications also. I use a 1.1 proxyserver (squid) that requires basic authentication.
  However I m able to use some of them as weather, maps, etc.

  I read solutions who suggested to temporary disable firewall and antivirus for test, I even try it but fails again.

  Other suggestions where has been going for windows 8.1 upgrade level, but how can I get this update, as it is downloaded in store that I can't access. Help, please.

  Hi Anand,

  Your computer is connected to a domain?

  Using a proxy server can allow the administrator to limit access to the Internet.

  You can reduce the effect of these problems by allowing unauthenticated through your proxy server access. We recommend that you enable unauthenticated access only for connections to URLs used by each application that has a problem. Some proxy servers may suggest that you create a list of URLs (also known as the 'white list') permissions.

  Please refer to the article to address these issues that relate to the use of Windows Store apps or use of Microsoft applications that are included with Windows Update or Windows 8, you can include the addresses mentioned in the article in a list of permissions ('white list') on your proxy server and enable HTTP and HTTPS access for them :

  The use of proxies authenticated with Windows 8

  For more information, see the article:

  Using the Proxy selection and Proxy bypass lists

  You can also consult the steps by Rajesh Govind, Support Engineer, may 4, 2013 and check.

  Windows 8 apps not able to detect the proxy for my machine settings.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Cannot start service ColdFusion 11 application server

  Services 
   Windows could not stat the ColdFusion I I Application Server on Local 
   Computer. For more information, review the System Event Log. If this is 
   a non-Microsoft service, contact the service vendor, and refer to 
   service-specific error code 2. 

  Can you please check if you have a correct entry site java.home CF11 in ShadoMX/util/Flex/SDK/bin/jvm.config of ColdFusion11\cfusion\bin

  Thank you

  Rahul

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• Cannot start Service Essbase

  Hello
  
  I work under Hyperion 11.1.1 and I have error.
  
  I want to start Essbase service in order to use MAXL / Essmsh, but the Essbase service cannot start. The service starts manually as usual and path to the executable file on C:\Hyperion\products\Essbase\EssbaseServer\bin\ESSBASE.exe
  
  When I tried to find the folder and run essbase.exe the error indicates that the name of the service is bad (Hypservice_1) and not found.
  In fact the Windows service, the full name is ' Hyperion Essbase Services 11.1.1 - hypservice_1.
  
  Anyone has idea about this problem? Let me know, thanks.

  These messages are simply put in custody and are common, there must be other information recorded in the window on essbase start?
  It is also useful to check the logs in C:\Hyperion\logs\essbase\ essbase.log and SharedServices_Security_Client.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584