my mailbox has exceeded its quota?

Similar Questions

• Activation of Windows7 get error 0xc004c020 "the activation server reported that the Multiple Activation key has exceeded its limit."

  I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?

  Hello

  Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx

  MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.

  Hope that helps.

  Kind regards

  Joel

• "The activation server reported that the product key has exceeded its limit of unlocking". Error

  Hello

  I recently changed my motherboard and processor because my old card mother and fried CPU. I had Windows 8 Pro (64-bit) installed earlier, an upgrade to Windows 7 (64-bit). As soon as I started first of all, I got a notification asking me to re - activate my Windows but when I try to activate it with my original key, I get this error: "the activation server reported that the product key has exceeded its limit of unlocking".

  I tried to activate by phone, but instead connect to the automated system, I keep to redirect to voicemail after a few rings. Can someone help me to activate my Windows again? I'm in Karachi, Pakistan.

  The report shows that it is been activated previously, but that the material has changed considerably since the activation - hence the request for reactivation.

  Not too surprising if you traded motherboards. :))

  Telephone activation is definitely the way to go - but it's in the lap of the gods (i.. activation e. operator the MS) as to if they will allow it if the original Win7 installation was an OEM.

  My belief is that they will allow him - of some people hold that they will not :)

• Key has exceeded its limit: error code 0 xc004c020

  Why my key exceeds its limit?

  see this:

  http://support.Microsoft.com/kb/938450
  You must contact your system administrator for assistance.

• Multiple activation key has exceeded its limit (0xC004C020)

  Hi, I'm a student in computer science at the College and I have a Dreamspark account that allows me to download free software such as Windows 7. Be a computer science student I am required to install and reinstall the operating system on a regular basis, so that I can finish my homework. However during the activation process a message came with the above error code indicating that I exceeded the limit MAK, even if I only used it on a computer without hardware changes with each reinstallaion.

  Is there a solution that would allow me to reactivate my computer so that I can do my college course?

  Thanks in advance

  A MAK license works like a regular retail key, which means that its static and doesn't require reactivation as a KMS license. So, I find this very hard to believe. Not even licenses KMS requiring reconnection to the KMS host every 180 days to be re-authenticated don't require relocation.

  Contact your local service, laboratory or software Center links for troubleshooting and reactivate the license.

  You can try also reactivate by calling Microsoft Volume License Activation Center:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• I have windows 7 (I got school) key but cannot activate it because when I try, it gives the error: multiple activation key has exceeded its margin of tolerance: 0xc004c020

  followng someone other advice I run MGADiag.exe and this is what I got:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-*-*-*-XGTTV
  Windows product key hash: UAyqgQGST6BFLgHPMXUm866IRto =
  Windows product ID: 55041-090-4329613-86911
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {0E591D9A-ED0F-44F2-BBF9-F90308D83D08} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {0E591D9A-ED0F-44F2-BBF9-F90308D83D08}1.9.0027.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-BATH55041-090-4329613-869116S-1-5-21-2281185912-906096093-2921545516HP Pavilion 061PY198AV-ABA m7360yPhoenix Technologies, LTD 3.1520060623000000.000000 + 000C9B83607018400F604090409Eastern Standard Time(GMT-05:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-090-432961-03-1033-7600.0000-2392012
  Installation ID: 009575798716141554831931417721562833412114049496025980
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: XGTTV
  License status: initial grace period
  Time remaining: 40140 minute (s) on (27 day (s))
  Remaining Windows rearm count: 3
  Trust time: 26/08/2012-21:34:59

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 8:26:2012 13:19
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: OAAAAAMAAgABAAIAAQADAAAAAQABAAEAJJSsekNGVAEmiRqLSOS8rp40sDx85BrFeqW9IPasgNc =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HP - CPC AWRDACPI
  FACP HP - CPC AWRDACPI
  MCFG HP - CPC AWRDACPI

  Any help greatly appreciated...

  You use a Windows 7 volume license distribution that uses a MAK product key activation.

  You can try also reactivate by calling Microsoft Volume License Activation Center:

  2. get a MAK or KMS key by phone by the
  Worldwide activation call centers.

  If an organization exceeds the MAK activation limit, then its TI
  Professional can contact the activation call center to request
  other activations.

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• my mailbox has exceeded the storage limit.

  System administrator told me that I have exceeded my storage limit

  Hello

  You must delete some of your emails, you need to keep more.
  You can also configure an archive as this >

  Kind regards

  Joel

• A run the system restore, and now my Adobe Acrobat license has exceeded its limit

  I tried to restore computer because of a corrupted installation and it deleted Adobe Acrobat, since the system restore did not work, I have reinstalled the operating system, corrected and then installed Adobe Acrobat Professional of XI, entered my license and it comes up with amounts excesses of this license. I would just get the license reactivated. Any help would be appreciated. I tried to call and Adobe is closed on weekends, cat I tried but nobody came online in some time so now, try the forums as they are 24/7.

  Thank you-

  Jake

  You need to talk to Adobe, not users on the forums, because only Adobe can reactivate something on their end.   I guess the numbers increase during the work week.

• How can I delete messages to avoid exceeding my quota of mailbox size?

  Original title: "problems of Postmaster mailbox."

  My mailbox size has reached 90% of my quota. I deleted everything I see in the Inbox, Outbox, and box of junk. How I deleted the other messages to avoid exceeding my quota?

   
  "blondeconnie2x" wrote in message
  News: * e-mail address is removed from the privacy... *
  > My mailbox size has reached 90% of my quota. I deleted everything
  > I can see in the Inbox, Outbox, and box of junk. How I deleted from others
  > messages to avoid exceeding my quota?
   
  --------------------
  You seem to have two choices?
   
  If you want to keep ALL your OLD messages on your e-mail server, and then open a session
  in to your mail provider web portal site and move messages to a folder
  you create?
   
  Or you can simply go to your e-mail account in Windows Mail and set it to
  delete messages from the server?
   
  Tools > accounts > select your account > properties button > advanced no more tab
  remove the check mark from 'save a copy of messages on the server', or set a
  reasonable number of days of retention of messages on the server.
   
  If you have difficulty deciding, or you don't know how to make my first
  option, and then get to this thread and explain your problem, also say us
  the part of your email address, beyond the ONE @.
   
   

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• Message "your mailbox exceeds its size limit.

  One of my email addresses continue to receive the message "your mailbox exceeds its size limit" while my other emails never received such message, please indicate how to solve this problem.

  BT is your ISP/mail server. Windows Live Mail is your e-mail client.
   
  On all three machines: Menu button. Options | Email accounts | This email account | Properties | Advanced. Check: Leave a copy of messages on the server.
   
  On a single computer only, check to delete after X days. Quite a long time for you to retrieve mail on all three, but not so long as to clutter the Inbox of BT.

• Web error: traffic blocked due to exceed the quota of session

  I have a problem with access to the internet. I don't know if I am posting this in the category right forum or not.

  Since last week I have been sporadically do the following random error message when going online. It will come when trying to access a Web page, but he seems to have nothing to do with the page itself. He rides on a wide variety of Web pages.

  

  "Blocked traffic due to exceed quota of session IP shaper. Please contact the system administrator. Your session quota is: 512, more traffic will be blocked. »

  I get this message on both my computer and on the iPad for my husband. Usually, if I refresh the page, the Web page originally, I was trying to go to load. But sometimes this error message will just continue to flow to the top when I try to reload the page.

  I use a MacBook Pro of the retina, OS X El Capitan, 10.11.4, Safari 9.1 version. IPad for my husband is a Mini iPad start (I don't know exactly what we) running latest iOS, I think 9.3.1 and Atomic web browser.

  I tried to do a search online for other people with this same problem and I found a lot of different complaints, but they were all in different languages from around the world. And none of them had real fixes. The only English and even made any sense is here: ause-of-exceed-per-ip-shaper-session http://superuser.com/questions/550362/http-requests-met-with-traffic-blocked-bec. But it doesn't really say how to solve this problem.

  I plan to call my ISP tomorrow morning, but I really don't see how this problem would be on their part I use Dish internet Network satellite. She has a monthly quota of data, but I have access to my use, and is not the problem. Indeed, my fair use reset for the month yesterday, but I still get this message. In addition, the grammar is odd in this error message, and it does not resemble a flat view. Something to suggest in my internet connection. And it is on many devices in my home and disrupts the use of the internet for my and my family.

  Trying to Resti.

  I'd appreciate really any ideas on what it is and how to fix it. Thank you.

  So, I called dish, my ISP, Friday, and no one there had heard of this problem. Their only suggestion was to connect my modem directly to my computer without going through the router and see if I have the problem persists, in order to see if the problem with my AirPort Extreme. Unfortunately, my computer, a MacBook Pro of the retina, lacks an ethernet port.

  I'm at a complete loss what to do about it, it's getting slowly worse and come more often. Does anyone have any suggestions?

• my printer has changed its policy to be very small characters and we can't read, how do I change the police?

  model printer officejet 4500 printer all in one, running windows XP

  The printer has changed its own police force.  I can't find anything to restore.  It is incredibly small and difficult to read.  I tried to restore the default values that did not work.

  OK when you open firefox go to file > Page Setup > ladder.

  Change the size of the scale and see if it makes a difference when you print.

• Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar

  Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar. My MacBook Pro is a mid-2012, 2.3 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR3 OS X Version Yosemite 10.10.5

  Graphics Intel HD 4000. Can anyone help?

  Thank you very much!

  Thai-Anh

  Reset NVRAM may solve it.

  How to reset the NVRAM on your Mac - Apple Support

  Or system preferences > sound, check on 'Volume to see the menu bar' to show the volume of the sound in the menu bar.

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• my laptop has lost its sound!

  I don't know why my windows xp has lost its sound, I go into the volume control and none of this is highlighted so here before, I can't change the settings please help

  Hi nicoladowler,
   
  -Have you done recent changes made to your computer after this problem started to happen?
   

  Follow the three steps solution given in the link below and see if it helps you fix the problem:

  No sound in Windows