"My Media" will not play on the right side of the screen

I am currently working on a music video, and I'm trying to test - Watch clips from 'My media' to make sure they are what I want before putting them in the timeline at the bottom of the screen. The problem is that these clips are not displayed on the right side of the screen more. When I first load iMovie, they do, but then after that I look at some of my video in the timeline panel, right screen seems to be stuck on this and will play not the clips of "My Media", although I can hear the audio. It's very frustrating, because I'm basically at a point where I have to restart iMovie after each clip that I add to my video. Any help would be amazing.

This is the first posting, I have seen with this problem. I can't duplicate although I do not see a hesitation before the video plays in the Viewer when I move the playhead on timeline to the media browser. I suggest you open iMovie, hold down the command and option keys and the removal of preferences in the window that opens.

Tags: iLife

Similar Questions

  • Why the clip will not play in the window of the observer?

    Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

    You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

    Russ

  • USB sync will not play on the sync in car package

    I have CDs that I ripped to my playlists and then synchronized on a usb key.  Will play on the computer, but not in the vehicle.  What I am doing wrong that the USB sync will not play in the vehicle?

    CIA

    Hello

    1. have you ripped music files and synchronize directly on USB?

    2. What is the file format of the files that you ripped?

    3. are you able to play the songs in a different computer?

    This problem normally occurs when the radio does not support a specific file format. If you are able to play the songs to another computer, I you suggest to use third party software to convert .mp3 files and then check with the question.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information helps. Response with status so that we can help you.

  • SWF file will not play on the Internet

    I've been everywhere on the internet, find the answer to my problem. I have a site in which I have two Flash animations that I need to play. We're working very well. I bought a model flash, edited, published, no problem. The other, I have a photo gallery template I customized, but it will not play on the internet, not even with the generated html file. Just a big black square appears. Here is a url to the nonworking time:

    www.atlantiswebandgraphics.com/ScottHambergArt.html

    This is the HTML generated by Flash 8. I noted that the publication of Flash 8 settings are set to 'Default' and the other Flash file that works is set to "Flash CS4 Settings." When I add that as a profile with a photo gallery, I get the error messages. I have screenshots of all the parameters in Flash, work and not work below files:

    www.atlantiswebandgraphics.com/images/WorkingPublishSettings.jpg
    www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings.jpg
    www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings1.jpg

    It's the working Flash file url: www.atlantiswebandgraphics.com/index2.html

    I could give much too much info, but I think better safe than sorry. And by the way, I'm really new to this (that's why I get models).

    Diane

    Thank you. I've decided to basically start from scratch on this model. It works now. As you say, must have been the unfinished function.

  • Satellite L500 will not load beyond the screen "Welcome".

    Hello

    My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

    Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

    Any help would be greatly appreciated.
    Thank you
    Kara

    The error message is not known to me and also looking in google didn t get advice.
    Maybe your Windows operating system is confusing upward.

    Have you tried to boot Win 7 in safe mode?
    Try this. Restart your laptop, press the F8 key.
    In advanced startup options, select the option called Mode without failure.

    If the laptop does not start Safe Mode, try the last good known Configuration option.

    If this n t help, try to fix my computer. Here, you can choose between different settings.
    Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

    So be aware of this!

  • When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

    When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

    Randy Ruttger

    Thanks for the follow-up.

    Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

    The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

    You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

    On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

    So the solution to the problem you presented in this thread could have been...

    1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

    2. move to a different version of Premiere Elements (which you did)

    I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

    Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

    Best wishes

    RTA

  • Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

    I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

    OK, let's see if we can solve this problem and make it work for you!

    First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

    Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

    Just as a few troubleshooting steps base to ensure that we have all the bases covered,
    Run all Windows updates, install all required service packs, etc.

    Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

    Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

  • How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

    How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

    kochetova01 wrote:

    How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

    Go to the message - details - do not disturb - off

  • My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

    My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. You receive an error message?

    Method 1

    See the articles below and check if it helps.

    Computer stops responding with a black screen when you start Windows XP

    http://support.Microsoft.com/kb/314503

    After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

    http://support.Microsoft.com/kb/318027

    Method 2

    I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    How to fix a computer that does not start

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

    Method 3

    If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

    It is possible that some third-party programs installed on the computer is causing the problem.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

    I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

    Depends on what you used for the backup.

    If you used the windows backup or another backup software will contain the entire disk will be a backup file, and view/use this file, you use the same software that allows you to save.

  • Series TV downloaded from iTunes will not play on the portable media player error: media type cannot be read

    Series TV downloaded from itunes will not play on my player portable media. I get the message, "the media type cannot be read.

    Hi ChristopherEaddy


    1. what operating system is installed on the computer?
    2. What is the type of file that you try to play?
    3 is supported by Windows Media Player file type?

     

    I suggest you to check and to provide us with the information about the installed operating system.

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

     

    Please refer to the below planned links and check the formats supported by windows media player file. Check if the information helps-

    http://support.Microsoft.com/kb/316992

    http://Windows.Microsoft.com/en-us/Windows7/C00D1199

     

    I hope this helps.

  • DVD will not play on the computer.

    my computer crashed.  The computer files were all saved, but I can't find any programs.  For example, I can no longer play a dvd.  I have Windows Media Player, but it won't play the dvd from the library movie.  Also, when I go to computer/CDrom, the CDrom is empty.

    Thank you for your help.

    If it's a cd rom it will not play a dvd disc. Have you ever read a dvd on it? Is that what you did re - install Windows following the accident?

  • serious discs will not play on the cd player or car drive?

    When I burned a cd of music with windows media player, the disc will not play on my cd player or car player! Help!

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/burned-CDs-will-not-play-in-CD-player/48cecc76-0A15-4c16-952d-f388244387f9

    See the response by Diana d.

    Tom Ferguson

  • DVD will not play on the standalone DVD player

    DVD NOT PLAYON STAND ALONE DVD PLAYER

    HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

    THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

    Thank you

    HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

    THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

    Thank you

    ==================================================
    If you use a DVD - RW disk... you could try a DVD-R, but some DVD players
    will not play a home made DVD... not much you can do about it.

    As an experience... you could try the following freeware to burn a video DVD
    recorded with your file to .wmv Movie Maker.

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://sourceforge.NET/projects/dvdflick/

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Why my system will not play "Avatar", the movie, and why he won't play a. MOV movie file smoothly?

    I don't know enough to provide more details.  I have a Canon camera, with all included software installed and a film I made that displays just fine on the camera and television, downloaded but will not play smoothly around a bit.  Brand new with Windows 7 computer.  It is what appears on the screen:

    Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.

    In fact I don't think I have a se video card.  I got 500GB of memory, 2, 4 GB of RAM, with a 3.6 GHZ processor.

    Thank you.

    Giaour

    Hi Giaour,

    Which version of QuickTime is installed on your computer?

    Apple Computer developed the QuickTime file format to create, edit, publish, and view multimedia files. QuickTime format can contain video, animation, graphics, 3D and virtual reality (VR) content. Only QuickTime files version 2.0 or earlier can be played in Windows Media Player. Later versions of QuickTime require the Apple QuickTime Player owner. For more information, visit the following Apple Web site:

    http://www.Apple.com/QuickTime

    More information refer to the following Microsoft article.

    Information on the types of media files that supports Windows Media Player

    Try the following and see if it helps.

    Method 1:

    I suggest to run the Windows Media Player settings Troubleshooter and check if it helps.

    Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

    Method 2:

    This problem may occur if the resolution requested by the application is not possible by two display devices. Typically, this means that the application can request a resolution interlaced, but one of the two screens is unable to support the required screen resolution.

    Refer to the steps in the following Microsoft article.

    Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

    Keep us updated on the status of the issue.

    I'm having fun not fast! I'm a fool. I downloaded an upgrade to 7.7.4 (I think) and it solved the problem of home videos. I still have to start the DVD player. Thank you much for the help. Giaour

Maybe you are looking for

  • How to fix the popups caused by clicking.

    So is there anyway to fix pop - up which is caused by clicking on things what so ever?As an add-on or something but not Ad Blocker because it seems to cause problems.It is only on Animeseed and basically, when I click on the play button, it causes a

  • Every time I load improved Firfox 3.6.6 I get an error message saying that the new version does not have the proxy setting.

    Whenever I load the latest version of Firefox 3.6.6 he says that he does not accept the proxy setting. Given that I've never had a problem like that, I don't know how to correct it. This has happened Each time Firefox opened

  • junk mail, is there a way to stop this unwanted friend?

    In my junk mail, I regularly get requests unsolicited from various companies. I place a block, but they still continue to arrive in the Inbox. Is there a way to stop this spam. Thank you

  • Unable to access Windows Live Desktop

    original title: WINDOWS LIVE WHY CAN'T WINDOWS LIVE DESKTOP OR WINDOW THAT SHOWS ALL YOUR FRIENDS. I HAD BEFORE MY COMPUTER CRASHING, BUT NOW I CAN'T. I APPRECIATE ANYTHING YOU CAN DO TO HELP ME. E-mail address is removed from the privacy *.

  • 6715 b bios flash

    Am running Windows 7 Ultimate 64 bit.  When the recovery is executed to create a disk Image, it fails stating that there is not enough space on the empty external hard drive (1. 5 t).  The drive is freshly formatted.  I want to reflash my BIOS with t