my memory stick says cant find "SOLAR".

What does that mean?

Please check if the autorun.inf file resides in the root directory of the memory stick. For example, if E:\ is the disk, the file is located in E:\ as E:\autorun.inf.

It can be hidden and system, so you must specify this folder options.
If the file is present, delete it and scan your PC for virus. Once removed, remove the device, replace and check.
Response if autorun.inf is absent.

Tags: Windows

Similar Questions

  • XP sp3 extraction fron memory stick says that's not a valid 32-bit

    Update of my cousins xp PC by takng back to factory settings. Downloaded SP1a and SP2 and SP3 on memory stick. SP1a and SP2 extract and install without problems, but when I try to extract the SP3, it says that this is not a valid 32-bit and will not extract/install. Tried to download stick to a number of timeds, both off MS site and others will be the same result. Any ideas?

    Different have been many recent reports on the corrupt downloads of WindowsXP-KB936929-SP3 - x 86 - ENU.exe. (Nuisance might or might not be involved).
    The right size of this file is: 316.4 MB
    Value of SHA1:
    c81472f7eeea2eca421e116cd4c03e2300ebfde4
    If you need a utility to determine the value of SHA1, I recommend HashCalc:
  • move pictures from a memory stick in a different place, and release in addition to the memory stick. I find that the pictures (copies) are always on the memory stick

    I don't want to make copies, which I already have, I want to get out in addition to the memory stick of mnving content in a portable hard drive permanently. My photos are totally assembled in 3 different places in my windows computer (not my fault) Photo Gallery, I don't want the images there are... My collection is private.  Picasa collects all the photos again. I want the originals stored for future use in a hard drive laptop or on disks.

    I do not use the photo gallery, you just need a viewer to open the pix.

    Also, I don't know why you get 4 copies. Some libraries can be deleted if you do not use. I don't remember those that can be deleted, so you'll just to test.

    If I understand correctly: create a folder for the original user and another for the edited pix. After you have moved the pix on the flash drive, you can delete the content of this file and it is there and empty for the next round of pix.

  • I receive a notice indicating that cant find this url

    I tried to put in the www, µcard. but it just says: cant find this do URLs that I need to enable something or install something I don't want to reset the browser from mozilla

    Hello

    Try access via this link:

    Also:

  • How can I move files to memory stick using Vista

    Can anyone throw any light on my new problem.

    I use Windows Vista Home on my Toshiba Satellite 350 and I'm trying to save a file on memory stick.
    I find the right file and click on 'send to removable disk '.

    I then get an "Item not found" box that contains the message, "

    "Could not find this point, this point is no longer in C:\Users\Desktop.
    "I (or any place seeking) check the location of the elements, and then try again.
    I checked the site and I have the right pair.

    I tried several times with different types of files/places and I get a similar message whenever I try to move the file to anywhere, not only the memory stick

    I tried dragging the files to the box and get the same message, copy and paste do not work I still get the same message?

    Anything I'm doing wrong?

    Are you kidding me?
    You n t know how copy/move the files on the other machine?

    You must mark the file, and then press CTRL + X (shortened for CUP) then go on the memory stick and open it. Press CTRL + V (paste).

    All that s!

  • I am trying to copy pictures to a memory stick and I get: cant create or replace file.can't find the specified file.make you specify the path and the correct name.

    That's what im I get. I had a momory stick which I just plugged and it worked. What is new, what I have to do something special? Thank you very much

    Hello

    Are you able to copy or move files or folders in the hard drive?

    Step 1: Run the fix it tool in the following article and check.

    Diagnose and repair Windows files and folders problems automatically
    http://support.Microsoft.com/mats/windows_file_and_folder_diag/

    Step 2: If the memory stick is empty then you can try to format and then search for the question.

    Here's how:

    1. right click on the memory stick and select format.
    2. click on the Start button.

  • Satellite Pro M70-137: can I use Memory Stick Pro Duo?

    I think to buy a new digital camera from Sony, witch uses Memory Stick Duo Pro. I'm not used to Sony memory cards, so I don't know if my Satellite Pro M70-137 of the 5-in-1 built in card reader can be used with Memory Stick Duo Pro. On Toshibas Web site, it says Memory Stick, Memory Stick Pro, but nothing on Memory Stick Duo Pro.

    Can we read/write Memory Stick Pro Duo with the build in the 5-in-1 card reader?

    Hello

    I found the info you can use Memory Stick Pro 256 MB to 1 GB on your device. I put t really know if you can use a Memory Stick Pro Duo. Check it please in the user manuals.

    If this is not the case, there are solution called Memory stick duo adapter. The example that you can find on http://www.pc-memory-upgrade.co.uk/memory/memory-stick-duo.asp

    Good bye

  • Re: Tecra M10 - BSOD with memory stick pro duo

    Hello

    As a first step, I would like to apologize for my English. I'm not so good at this.

    I have a M10 - 11U (PTMB3E) and Windows XP. When I insert a Memory Stick Pro Duo card to the card reader the system just fall into BSOD and reboot my laptop. It says BAD_POOL_HEADER and something else. But when I insert an SD card works properly. And I think that when I had Windows Vista everything worked well. So I invited, it is in the card reader drivers, but I can't find one that would work.

    What should I do?

    Thanks for your advice.

    Hello

    For memory stick duo pro cards that you must use an adapter, you read. Do you use such an adapter?
    You can find this information in the user manual and it seems that you need an adapter for the memory stick cards.
    Check this box!

    In addition, you can download all the drivers on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Photo HP Envy all in a single 5660: Memory stick compatibility

    I just bought this printer. I can't know if my stick duo memory will work. When I try it says it's corrupt or not a format supported. I had a chat with technical support and they say that it is supported. My camera is a sony cyber shot and uses memory stick pro duo. It is a bridge of pict format. The key works fine in my computer, the camera and the old printer. I'm not tech savvy simple instructions are needed. I'd appreciate any help you may have. Can't seem to find anywhere that I tried.

    Hello

    Please see the section "Specification of memories".

    Kind regards.

  • Qosmio G10-133 & Vista can't recognize my memory stick

    Hello

    I installed VISTA on this laptop, and I had a few problems that you can imagine!

    I can't recognize my memory stick. I can't find the drivers and that Windows is unable to solve the problem.

    Someone got clues?

    I'm also having a problem if I turned the laptop off. The only way I can get the power on button to work is to remove the power cable and the battery and then I turn on the laptop. If I don't take the power cable and the battery I get the green light on the power button, or no light at all, and by pressing seems to do nothing. I also have an orange light blinking on power light on the front of the laptop. I guess it's something to do with the thought of the computer it has hibernated or something?

    What to say to boyfriend.
    The Vista is not officially supported on the Qosmio G10 and the Vista drivers don t series there for this series.
    Always is it that you need a card reader driver to use the memory sticks. But as I said above, these drivers are not available and don t exist.

    What you can do is to check the drivers for G30 but I'm very skeptical that it will work on the G10.

    Good bye

  • Satellite A100-447 does not accept the 1 GB of flash memory or a memory stick?

    I've had my laptop since March and have used a compact flash 128 or 256 MB via adapter without any problem.
    However, I have now bought a 1 GB (for my Eos 300 d) but my laptop says cannot find software?

    I then bought a memory stick USB 2.0 1 GB, but my laptop does not accept that no more? In both cases, it search in windows for the solution, and then asks for the disc accompanying the material. My husband (good PC knowledge) is at a lost as I am.

    Any advice would be much appreciated.

    A moment please. talk you about the USB drive that is plugged into the USB port?

    Well, usually all USB devices should be recognized without any bigger problems.
    Sometimes the 3rd devices come with a driver, but usually the operating system should be recognized as a new device!

    Are you using the Vista operating system?

    If Yes, please disconnect all USB devices and remove all the USB ports on the Device Manager.
    Reboot the laptop. After the operating system has loaded the ports should be recognised again. Then you should try to plug the USB again.

    PS: Please check if Vista has been updated! This Microsoft document describes several USB with Vista problem and provides a new patch:
    http://support.Microsoft.com/kb/941600/en-us

  • Memory stick SanDisk Cruzer Pop does not not on HP Probook 4540

    Hello

    I recently bought a SanDisk memory stick and have tried insert in all USB ports on laptop to my HP Probook 4540 (Windows 7) but anything that happens, not even a notofication to unrecognized device damaged no matter what. Have searched the net for possible solutions and followed instructions to look in the Device Manager. It does not appear in the computers tab Device Manager, but in the "Other devices" tab, there are yellow for warning / exclamation symbols next to "Base system device". I right click on the Base system device and properties and it say the following:

    The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information.

    To find a driver for this device, click Update driver.

    Have you tried 'Update Driver' but he said just that no driver can not be found. Would like to get this sort once for all posed the same question problems when I plug my Samsung Galaxy S3 at my Probook too. Would be recognizing all of the useful comments!

    Thanx

    Mozz1982 wrote:

    Hello

    I recently bought a SanDisk memory stick and have tried insert in all USB ports on laptop to my HP Probook 4540 (Windows 7) but anything that happens, not even a notofication to unrecognized device damaged no matter what. ...

    Hello

    How can you insert a memory stick into a USB port? It's physically impossible? Are you talking about a USB / flash / key reader?

    Kind regards.

    Update: I know what you're saying here. USB driver on your computer, copy the following link:

    FTP://15.201.202.83/pub/SoftPaq/sp60501-61000/sp60825.exe

  • How to fix a corrupt Sony Memory Stick Pro Duo

    Hello, I have a problem with my Memory Stick. I'm sure that it's corrupt, because I get the usual "No. Memory Stick detected" messages.

    The problem here is that I need to know how to solve this problem by using Windows. I have a memory stick reader that I consider using a USB port and whenever I try to open the location, the computer either locks up until I have remove the stick, or he says no disc inserted in the drive. Once, I managed to get my other computer to say "Device must be formatted before use", but after clicking the format, he said that couldn't be. It seems that Windows just hate my Memory Stick but I really want to solve this problem.

    If someone think of an answer, please answer. I'll give you more information if necessary.

    Insert the disc, but do not attempt to access or open.  Go to start / Control Panel / administrative tools / computer management / disk management.  The disc appear?  If Yes, go to the disc and try to format it using disk management features (I guess since you've already tried to format that it contains no data to record).  If it does not, there is probably a problem with the memory stick (or the USB port - try another port) as only corruption would not prevent from being recognized as valid a drive.

    Let us know what happens.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • SONY Memory Stick PRO-HG Duo MS-HX16A doesn't work in Vista Business 32-bit

    When I insert my memory stick Duo PRO-HG in my laptop gateway E - 155 running Vista 32-bit Professional (Service Pack 2), and I check the Device Manager, a device called "MemoryDisk0" appears under the "Disk drives" section of Device Manager.  It runs by default windows drivers disk.sys and partmg.sys.  The disk memory is not recognized by Windows (it does appear as a hard drive under 'Computer'), or he 'fills' when this button is pressed under "Volume" in the Panel properties for MemoryDisk0 (I get an error msg).  ALSO: if I hit "Scan for hardware changes" or even "Uninstall" for this device, the system just loops - nothing happens, and I have to use Windows Task Manager to end the task.  ALSO: if I try to restart my computer, Windows will not come - I need to remove the Memory stick or return o a previous installation of good.

    How can I get Windows Vista Business 32-bit to recognize the drive correctly?  I visited the site of SONY, and the only driver I can find for sticks of memory is the MSAC-EX1.  I did try and 'forcing' Device Manager Vista to load this driver for MemoryStick0, but Windows says that it is not a compatible driver.

    Hello

    1. When you mention "I get a msg of error", what is you get the exact error message?

    In Device Manager , right-click on the "MemoryDisk0" and select Properties, and check what error code you get and post back with the details.

    2. have you tried to connect a different Memory Stick?

    If other USB keys connect very well, then I think your SONY Memory Stick PRO-HG Duo MS-HX16A could be faulty and you may have to contact Sony for better help.

    Afterwards, do a right-click on the device (MemoryDisk0) in Device Manager and try to update and check if that helps.
     
    Aziz Nadeem - Microsoft Support

  • Re organization command photo on a memory stick.

    I've got El Capitan installed on my Apple Pro. I got a few photos scanned (all at the same time) and saved on a memory stick. I saw the pictures, and now I want to rearrange the photos for a presentation. I dragged and moved photos to create the order I wanted. However when I saw pictures again, I found that they had returned back to their original positions. I obviously did not have something that would be ' locked their ' in their new order. I would like some advice. Thank you.

    The only way to force a particular order is to add a prefix or a suffix to the files in the order of your choice. That is to say, 1filename.png, 2filename.png, etc.

Maybe you are looking for

  • Sync IMAP folders does not not 38.0.1 RESOLVED by compact

    On my desktop PC, I use Thunderbird 31.7 at home I went to 38.0.138.0.1 does not synchronize folders. I don't know if it's a software flaw or a decoration. There is no error message generated. Any ideas?

  • Memory config for Tecra 8000 PIII/500

    Can someone clarify this for me - I guess that the memory config for it would be the same as for a PC. Can I mix and match modules memory too long that I do not exceed the maximum of 256 MB. Apart from the conflict, a 133 MHz module would just run at

  • Old photo HP7520 installing software

    I replaced a HP 3300 all-in-one with a 7520 Hp all in one. 1. is my old software compatible with the new machine? Area of the image, Solution Center, etc.? 2. If I uninstall the old software will lose I have the documents that have been created here?

  • Slow bookmark manager

    Hello. Is it just me or is the slow super Bookmark Manager on large projects? It seems that every time I open Labview scans all files, search for comments It takes between 15 to 20 seconds, every time I open it. the project has 900 + screws but only

  • How to set a static ip address

    How to set a static ip address in xp pro