My microphone is made of frying noise

Similar Questions

• Satellite M45 - DVD driver made so much noise

  Hello

  I can't play a DVD in my DVD player. It says that it cannot read the source. I use Ubuntu. Also, when I tried to play a music CD, it could play, however, the driver creates so much noise (noise of spinning). Can you tell me what could be wrong with that?
  Or you have a suggestion with anything?

  Thank you very much!!

  Zee

  Hello!

  I put t have much experience with Ubuntu, but play DVD try another player.
  I always use VLC Player and I think that this player is also available for Linux systems.

  For Windows is a tool called Drive Acoustic Silencer available and Nero has a similar program. So I'm looking a bit with Google if there is also a program for Ubutnu available.

  Good bye

• my tour made some strange noises

  My Tower is a loud sounds coming from the back where the fan is I have no idea what can hurt any1help me

  You can take the party off the PC and take a look inside. Make sure that it is not prime. It could be a wire to the fan, or it could be a lot of dust accumulation. If everything seems fine, it may just be a bad fan. Most of them can be replaced, with the exception of the supply fan (requires a complete new unit).

• LaserJet CP6015dn made noise every 30 seconds

  When the printer is turned ON, not printing, it made a loud noise similar to a hard drive every 30 seconds.  The noise lasts about 1 second, but he keeps doing and it starts to annoy him those sitting near him.  He started to do it directly out of the box.

  Everyone knows this?  -Thank you

  I turned in a support ticket, and they said that it was part of its normal operation.  About every 30 seconds it turns slightly battery to prevent them from developing the flats.

• Satellite A30: strange loud noise from speaker & headphone

  Hi guys,.

  I bought this laptop some time ago (3-4 months). Don't worked fine, no problems at all. Used VOIP (Skype), etc.

  Then I started having strange noises of frying (speaker and headphone).

  And now - after a month or two, I started having this problem - I can not record voices.
  This laptop isn't microphone with microphone. tested the microphone with another laptop, it works fine.

  Reinstall the driver did not help. :(

  Anyone any idea?

  THX!

  * @ matt13 *.
  If the technicians have tested this laptop and didn t find any abnormality of speaker then everything seems to be ok.
  You said you play bad music. I think you mean bad quality music.
  Then I n t wonder some frying noise seems to play this kind of music.

  *@bzsolt*
  I recommend reinstall the operating system, because I noticed a similar problem on my laptop and after a fresh install, everything was ok.

• whistling noise brand-new macbook air

  Hello

  (video showing my problem at the end)

  I've just switched to Mac a week ago and have a small hiss when my mac is inactive or when I close the lid and reopen immediately (it happens every time, even if I once again, as in the video).

  It's less than a week and I installed a few programs and applications at the same time so I don't know which one of them could be the cause or if it's a hardware problem?

  I am running OS X El Capitan 10.11.6 on a Macbook air 13 "with the processor 2.2 GHz Intel Core i7, 8 GB RAM DDR3 1600 MHz and 512 GB SSD

  Programs and applications include chrome, vlc, spotify, Skype, vm ware fusion, memory clean 2, caffeine, anytrans, google keep and SecureDownloadManager

  Note: my friend has bought exactly the same Mac with i5 processor and has EXACTLY the same programs and applications (unless vmware fusion, which does not work when I hear the noise and the memory clean 2, I tried to quit smoking to see if the noise is still there and there was...)

  Note 2: I download the free version of Soundbunny to control the rendering of all applications, all mute mets and he always made the sound noise

  Note 3: If I lower the volume, the sound is lower is not hardware related (I found a lot of people complain about macbook pro noise CPU in my research to track down that noise)

  Here is a video of the noise:

  (no need to create an account, simply click next to the entry box)

  https://www.dropbox.com/s/487i9xi94pev5wy/Mac%20Noise%20-%201.m4v?DL=0

  Unable to say a video, but it could be a hardware problem.

  If the computer is new you should take it back to apple.

  http://www.Apple.com/contact/

• External drive of CD - a power of noises, ejection of discs

  I have an external CD drive for my Mac. This has worked great until recently, when I put a disc, and it's a horrible cracking noise and made a few noises overwork/spinning, then ejected the disc. My iTunes/Mac has never identified that a drive has been put in. It was a CD of the library, so I thought that safety stickers were the cause, but it happens with all discs. Anyone with problems or similar solutions?

  What kind of car?

  -A drive with a tray which slides and goes in?

  - Or a slot from where it "*" in the disk?

  How old is the drive?

  Is there any foreign body in the drive?

• External microphone not detected and faulty internal mic on Satellite Pro U400

  I have had several headphones with microphone and taken headphones 3.5 and the laptop just will not detect them. I tried to disable the internal sound system, or just the MIC internal, but not luck.

  The internal MIC is a (stronger if the external microphone is plugged) whirring background noise which means I can't use it for work.

  Any help is appreciated!

  Which is really strange.
  Are you using the original recovery image Toshiba and Toshiba driver sound?

  U400 is older model laptop and I would like to know since when you have this problem.
  I can't imagine that you got from day1.

• Satellite C670-11 q clicking loud noise the HARD drive

  Hello!

  I helped my neighbor to find a new laptop and the entire installation and start-up.

  We ordered a C670-11 q and it works very well, theres just a nuisance.
  The drive made strong rattling noises, not as a dying or working drive. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  I don't know if this laptop has a shock sensor to do this? The laptop was flat on the table, and there where NO vibrations while she does. There are no clicks under load, but they occur randomly when walking to the idle or surf/write normal.

  I checked also save energy options and disabled to turn the disk, without help.
  Also, this seemed odd, because the clicks occur often several times in a row. But there is no doubt it more when running on the battery.

  I am running the BIOS and latest drivers in the area of support (as of yesterday).
  The disk is configured in performance mode, I'm testing battery economy - should I?

  And no, the drive took a beating. I was the first person to turn it on.

  The drive is Hitachi, I don't run their analysis - no error.

  Any help is greatly appreciated: o)

  > The drive makes some noises clicking on, not as a dying drive or work. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  One of my computer portable HARD drive makes such noise too.

  I m not exactly why, but I also think that it is at the head of discs moving record position.

  However, I think that this is not really a malfunction since the laptop works pretty well and I didn't notice any problems with the HARD drive or files but I have created a backup of my files, just to be sure that you know
  I think you should save the date just to be sure

• Micro have a lot of noise on Satellite Pro U400-13O

  Hi there and Happy New 2009

  Toshiba Satellite Pro U400-13O, I bought a week ago and found out that the built-in microphone have a lot of noise when I talk via Skype for example.

  I tried changing the driver, but the problem still exists.

  What should do S? Any suggestions?

  Thanks in advance for your support

  CIKI

  BTW: I am running Vista

  Hello!

  In your case, I would check the settings in the control-online sounds and audio devices Panel
  Perhaps there is a misconfiguration or other.

  Good bye

• Normal palmrest rMBP 15 '' rattling noise?

  Hi all

  I'm certainly not technically minded, so sorry if it is not a stupid question / too long! I'm also new to the forum so I hope I put this in the right place...

  I have a September 2014 15 "Macbook Pro. Us build some quality problems with it (trackpad rattling, squeaking hinge) I solved last November. Now, however, a couple of new problems have emerged:

  (1) even under slight pressure (put your hand on it or, sometimes, rest two or three fingers on it) the Palm made a rattling noise pronounced, as something that separates from something else and then meeting again when I take the pressure on her.

  (2) the lower part of it can feel quite fragile, and sometimes when I press lightly on it I can hear the sound of two bits to touch metal (noise low 'thought' is the best way I can describe it).

  I was wondering if it is normal - the genius at the Apple store insisted that the mahlstick noise was just the clips that hold the main Board in place. I wasn't convinced as he only started doing a month previously, as surely that this was only the clips making the noise, he would have made noise for 1 day? They also could not find anything wrong with the below.

  I was wondering if these are problems that anyone else has met--I'm not worried that the computer is going to break or anything, it's just a little embarrassing that a premium computer has these niggles build quality!

  Thank you very much for reading!

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Transformer series Equium makes noise

  My ca PSU makes a noise of snoring really bad, is - this normal? It happens to any point of exit that I use.

  Hmm I remember my old adapter made some strange noises.
  After checking, I discovered that my AC adapter cable was broken.
  I contacted the ASP in my country and the cable has been replaced.

  I think you should contact the ASP for a help too.
  I put t know if only the cable or the whole power adapter must be replaced but I'm sure that the technician will help you.

  Good luck buddy

• Noise suite of crush the hard drive. Now disk use stays 50% to 100%.

  So my hard drive crashed and made a weird noise. After the restoration of the operating system, use of HARD drive in the Task Manager is 50 to 100%. What should I do? My PC is 500-199 and has no defects on it. Help, please

  Hello

  Since your drive HARD crashed and you need to restore the operating system, try running a disk check.

  You can also perform boot HARD drive Diagnostics. Select "Test using PC HP Diagnostics (UEFI) material" in the HP support document.

  These tests check the system files and the integrity of your HARD drive.

  If all the tests are good try uninstalling and reinstalling each program.

  I don't really know what else could be causing these two programs to act in this way.

  Jaco

• My HP Officejet 6500 has more makes noises at the start

  I've owned this printer this 6500 more printer for over 2 years now. He made a few noises when starting. Although there are no noise during printing or scanning.

  Should I be worried. It is the cleaning of printheads. The printer loses ink in the process.

  I left mine on all the time, they automatically go into a very low power state when printing or copying not.

  Know that you have no need to replace the cartridge when it indicates low on ink, it's just a warning to give you notice so you can have time to get a replacement on the spot.

• HP laserjet 2430 gear noise

  I have HP laserjet 2430 who made so much noise in the back and I checked the gears seems perfect and even changed some of those who watched prevails. the noise is made a few seconds(2-3) after turning on the printer.

  Any help?

  I got it!

  The fuser unit has a speed right next to the equipment of fiber that animates the pressure roller and its not not perfect fitting its axis to axis. Initializing the printer, it tends to lateral movement and oscilates causing noise. I have come to discover that and am very well now. I mounted a plastic sleeve to keep it in position and its now just like new.

  Thank you