My Microsoft Intellimouse does not work although the battery and USB connection is all good.

HID Non user input data filter update failed with error code 800F020B - is - it?

Hello

Thank you for using the Microsoft Windows Vista Forums.

I will need some additional information to help you best.

ؠ Which is the update does not install?

Follow the instructions below that may help you resolve the issue.

Method 1:

IntelliMouse: Wheel or buttons not working not properly

http://support.Microsoft.com/kb/305820

Tips for solving problems of USB devices

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

For more information, see the link below.

http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/9a5a1cb9-4f4e-49c1-9356-5a3ad2782fc5

Check whether the problem is resolved.

Method 2:

Follow the instructions in the link below and check if you get the error message.

Windows Update error 800f020b

http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

Please post back and let us know if it helped to solve your problem.

Kind regards

KarthiK TP

Tags: Windows

Similar Questions

  • loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

    loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • WiFi does not work on the battery!

    Hello

    I am running Windows 8.0 (64 bit) and my wifi does not work properly in battery mode. AC adapter, it works 100% perfect but in battery operation, it always goes to limited connectivity. He repaired, but 25seconds later, he gets the same problem. Limited each time connectivity. It's a never ending cycle warranty has expired and I am not happy with it.

    Even if repaired, impossible to open any website. Full 5 bars wifi but still the same result. Tried manually (TCP/IP IPv4 settings) but did not work at all.

    My wifi driver is Intel Centrino Wireless N 2230 (15.12.0.6 updated version of the intel.com site).

    C2Y46AV product number (HP ENVY DV6 NOTEBOOK PC)

    Serial number [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

    Tried everything that I could possibly think off such as disabling firewall windows Norton Firewall & Running but still the same problem.

    Can you please tell me what to do?

    HP update.

    Can you please provide a solution for this.

    Thank you

    Navaid involves.

    Hello Ophelia-involves.

    Thanks for posting on the HP Forums!

    I understand that the computer has problems connecting to the networks without wire on the battery life. I'll do my best to help you! After some research, I actually found a Microsoft document that contains the steps I would have provided for your problem: you may experience problems with connectivity or performance issues when you connect a portable computer that runs Windows to a wireless access point

    Please try these steps and let me know what happens. Thank you!

    Mario

  • my wireless keyboard does not work on the letter and number keys.

    It seems to be connected to the computer, because it does not work on the control button and snooze sound

    Hello

    -Have you made any recent hardware / software changes prior to this question?

    -What is the brand and model of wireless keyboard?

    Method 1: run the hardware troubleshooter.

    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: update a hardware driver that is not working properly

    (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    (b) in the list of hardware categories, find the device you want to update, and then double-click the device name.
    (c) click on the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 3: resynchronize your device with the receiver

    To resynchronize the mouse or the keyboard with the receiver, follow these steps.

    Note When you synchronize the mouse or the keyboard le clavier with the receiver, place the device near the receiver and store other keyboards and wireless mouse at least 6 feet.
    1. press the button on the receiver and check that the light on the receiver starts flashing.
    Note Some newer devices from Microsoft are subject to their receiver and cannot be reset. If your device has a button, go to method 2.
    2. If a dialog box appears on the screen in seconds, follow the instructions that appear on the screen. Otherwise, continue to the next step.
    3. press and release the Connect Channel button on the bottom of the mouse or the keyboard.
    4. check the green light on the receiver. A continuous green light means that the synchronization was successful. If the problem persists, repeat steps 1 to 4.
    5. for the Wireless Notebook Mouse: this issue can occur if the micro-switch on the bottom of the mouse is not released. Use a PIN or pen to try to release the button, if it is pressed.

    Hope this information helps.

  • Satellite A100 PSAA9C does not work without the battery inside

    I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

    The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

    If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

    If I do this a couple times, the machine will be not even by post before turning off.
    If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
    If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

    As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

    Thank you.

    Hello

    If I understand your assignment, the laptop does not power up without the battery
    But it will light if the battery is connected.

    The question is; Is the power led on if the AC adapter is plugged?
    If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

    I think you should test a new adapter. Maybe it helps!

  • My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

    My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

    You don't say what you mean by not working not properly, however...

    Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

  • AC adapter does not work if the battery is not removed on my Satellite?

    A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).

    Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.

    Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?

    I don't think so, it's a motherboard problem?

    Hello

    It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
    But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
    But the battery is ok and AC adapter works as well as you suggested.
    What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
    Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.

    But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.

  • Satellite C660 - keyboard does not work but the Num and caps lock shift are on

    I have a Satellite C660 which was working fine this morning. When I came home from work and he turned, the keyboard does not work and therefore can not enter my login information.
    The Num and caps lock shift are turned on.

    Any ideas on how to solve this problem?

    Hello

    You are able to disable the CapsLock and NumLock?
    You can access the BIOS by pressing F2 by turning on the device?

    If this does not work, I would recommend checking an external USB keyboard.
    If the USB keyboard would be functions, then this means that the internal keyboard is defective and must be replaced.

  • Works writing Maske in swf and video - Datei nicht fonts mask does not work in the swf and video files

    Hallo,

    ICH habe eine writing-Maske standing. In der Voransicht auf der Zeitleiste looks man die Maske,.

    Wie sie richtig should be.

    Aber in exportierten und swf videos. Dateien wird die Maske non dub.

    Was mache ich please.


    Hello

    I created a signature mask. In the Preview on the timeline, you can see the mask,
    as it should be correct.
    But in exported swf videos. files the mask does not work.

    What I am doing wrong.



    ocak.jpgtest1.jpg

    I don't see anything that looks like a mask on your stage effect.

    in general, I think the image hidden (below OCAKBAŞI) is visible and nothing else.  you have two other visible layers makes it difficult to see what you are trying to demonstrate.

    text mask problems generally, because the text is not broken down into vector shapes (by clicking on edit > to break > to break).

  • Satellite P205: Touchpad does not work when the new adapter is connected

    I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

    -Does not load properly and turns off after an hour.
    -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
    -Charger Word to say the laptop plugged in but not charging

    What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

    See you soon!

    Hello

    I guess that the touchpad worked correctly in the past with the former sector adapter.
    Is this good?

    Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

    Check the AC adapter s old part number and if the issues could be resolved using this adapter.

  • Satellite A30 161 does not work when the battery is installed

    Hello

    I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

    When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

    Any ideas?

    Hello

    This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

    To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

  • Sound does not work on the computer and the volume icon does not appear in the system tray.

    Original title: my sound icon has disappeared from the taskbar.  The Control Panel indicates the sound is on, but I can't hear anything.  What happened and how do I get my sound back?

    Have a Toshiba laptop that always displays the lower icon audio in the right hand of the screen.  The sound icon has disappeared and I can't hear anything.  I check Contol Panel and sound, and he says it works and is turned up... but I can't hear a thing.  How can we retrieve icon of audio and how I can hear sound?

    Hello

    Thank you for your response.
    I did a "System Restore" and the icon reappeared, and the sound now works.
    I restarted the computer a couple of times, but that does not solve the problem.  Also, I went into the Panel and checked to see if the speakers were working and were lit, and they were.
    It wasn't until I did the restore of the system that the icon reappeared and the noise began to work again.
    Thank you.
  • Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown

    Hi guys,.

    I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).

    I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:

    CPU: AMD Phenom II X 4 955

    RAM: 16GB DDR3 Corsair

    GPU: nVidia GTS 450 (1 GB of GDDR5 memory)

    My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).

    Troubleshooting I executed before writing these lines:

    • Updated my nVidia drivers
    • Checked the themes and DWM Session Manager services, both started, both the Auto value
    • Ran the store built, the problem cannot be resolved
    • Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass

    So the GPU is not the problem, I've been running Aero until this problem has occurred.

    Any ideas?

    Thank you!

    Hello

    It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.

    You can follow the link to your question:

    The customers TechNet Lync and devices Forum

    http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads

  • Firefox 5 does not work with the AVG and Google toolbar, among other problems

    I downloaded Firefox 5, invited by Filehippo. Among other things, my anti-virus sw were not compatible, the Google toolbar disappeared and could not be put back because I was using an old browser! I did a system restore with the result that Firefox did not work at all. I went back to version 4, only because a guardian program requires firefox, otherwise I'd returned to Windows Explorer. It cost me a lot of valuable time.
    I tried to make this complaint under the feedback, and the button send didn't work.

    Google must update the program toolbar for Firefox 5.0.

    The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.

    https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  • metro tiles does not work although they pan and are very dark

    Hi just received a pavilion with radeon amd

    metro tiles work well

    some jerks and are very dark

    can't see the characters on the screen on some of the tiles

    How to correct?

    Hi, who did not work
    What I did even if the PC was just 3 days old must have graphics new drivers for the card that healed the question
    Thanks for your help

Maybe you are looking for

  • can I use Apple Watch bought in the United States in Australia

    My parents have decided to buy myself a Apple Watch in the USA when they go to spend the holidays in 2 weeks. I live in Australia, I'll be able to use it without any problem or do I have the Australian version?

  • Qosmio G40 - no sound on HDMI

    I can't get sound on my LCD TV connected with cable HDMI with my Qosmio G40. Help please.

  • Cooler on Satellite L505 making strange noise

    I have a Satellite 505 for about 6 months, and a few days ago the cooler started making strange buzzing when he works on the high rpm. He fell, got shaked, nothing.Is it possible to fix it (maybe clean?) without taking it to the laboratory of support

  • Recover a bad BIOS on HP Pavilion dv6-3032sa

    Hello I have a BIOS corrupted on my HP Pavilion dv6-3032sa (without partition HP_TOOLS) how to restore the BIOS with a USB flash drve? I can't boot into Windows on the computer. I've seen to recover the BIOS article (http://support.hp.com/gb-en/docum

  • Have no sound after Windows update in Windows Vista.

    I have windows vista and just did an update, now I have no sound...  I have a Toshiba laptop.  I tried to do a restore point for two different days, but it keeps giving me an error.  I have no sound, so now what?