My Microsoft Virtual WiFi Miniport card goes missing after sleep

Similar Questions

• Microsoft virtual wifi miniport card does not properly - code 31.

  I installed AVG Antivirus (bought) and my computer started to loop on a blue screen after installation, so I removed it.  (sony vaio, Windows 7 Edition home premium).  Seemed to go well for several days, we wre away, the computer was off.  I've updated a security setting in my facebook yesterday, perhaps the two are not connected, but then I got threats from three to microsoft, including a message that someone (I did it with a different account) had logged into Facebook with an ISP located in another Province... possible given companies cover several provinces.

  When I saw the threat of malware, I downloaded the free version of avg again and removed.  After the virtual wifi miniport card no longer works and I have been unable to connect to internet, router working properly and it shows me as connected.  I've searched these forums and saw a similar post and a response that suggested to uninstall driver and reboot, so I did.  Now, no driver and still can't connect to the internet.  Someone out there with a solution... it would be much appreciated!

  Hello

  Map of virtual wifi miniport is used only for setting up spepficif. You have not provided any technical nursing on your system, but I diubt map of virtual wifi miniport is the problem.

  Get rid of all the 3rd party security and clean up after him.

  Install the Microsoft Security Essentials.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Scan the computer and clean if necessary.

  Then make WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset press enter

  netsh interface ipv6 reset press enter

  ipconfig/flushdns, press enter

  Restart your computer.

  If the above didn't help.

  Open a command prompt, type sfc/scannow and press ENTER.

  It must analyse the system files and replaces incorrect versions with appropriate Microsoft versions.
   
  This document contains more information on SFC scan: http://support.microsoft.com/kb/929833

  Note, if this process shows too many errors and cannot fix them, it is advisable to reinstall Windows 7.

• ICS via connection PPPOE Miniport Wan via Microsoft Virtual WiFi miniport card

  Windows 7 Ultimate 64 bit. Pavilion 1201tx g6.

  I recently changed my ISP and it me connected via Dial-Up (WAN Miniport PPPOE) connection.

  My current network configuration is shown below:

  

  Problem is that now I can not share my Internet to my Android.
  Before, when I had just the active LAN connection, I could do it easily. But recent changes allow me to share internet.

  I use Virtual Router and sometimes I use guest also. He started not even when I ran the commands in cmd. And I am the admin of my laptop.

  Need serious help please.

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  In fact I already found solution myself. I used it every day.
  
  I need not create VPN. Normal ICS works well.
  
  I start Virtual Router as soon as I have the dian PPPoE connection and it works!

• Microsoft Virtual Wifi Miniport Adapter missing

  L.S.

  I would like to create a hotspot on my Windows computer. Windows supports this and he needs the Microsoft Virtual Wifi Miniport card for this. The question is this:

  I don't see Microsoft Virtual Wifi Miniport Adapter in my device management.

  I tried the things:

  (1) checking the section "hidden devices" in device management. He isn't here.

  (2) update the my wireless (Netgear A6210) network card drivers to the latest version.

  (3) update the drivers of my network card wireless (Netgear A6210) to the first version available.

  (4) reinstall the drivers of steps 2 and 3.

  (4) the execution of a number of commands that search on Google, I found:

  "command netsh wlan set hostednetwork mode = allow."

  "netsh wlan start hostednetwork" (which made me an error - sorry for the Dutch: Het gehoste kan niet worden gestart netwerk.)
  Of bron has right status aangevraagde bewerking ITU om niet groep you voeren.)

  "command netsh wlan set hostednetwork mode = allow ssid = NameOfNetwork key = StrongPassword".

  "command netsh wlan set hostednetwork mode = allow ssid = NameOfNetwork key = StrongPassword".

  (5) install the drivers of VirtualWifi, which landed me an error:

  C:\microsoftmeshwifivirtual\VirtualWiFi\binaries>VirtualWiFi.exe install

  VirtualWiFi driver installation...
  Cannot complete the action.
  Error 800f0203
  Problem-2146500093 VirtualWiFi driver installation.

  ------------------------------------------------------------------------------------

  I am solutions now and I need help for other steps I could take.

  Thanks in advance!

  Wifi miniport exists only after you have successfully put in place a network hosted - it is a virtual device.

  If you can, it would be interesting to restore an image system before all your attempts - just to make sure there is no debris around to stop you from your repeated procedure.

  The following documents have been cut & pasted directly from the windows command prompt, I used successfully implemented and use this utility [in Windows 7 and Windows 10].  I mention this because when I wanted to find out more about the fact that I discovered a lot of rubbish, written by people who had either never tried & have been incorrectly copy of notes from someone else or they were just of their inaccurate memories.

  1 you must first verify that your WiFi card is capable of this job.  Enter elevated command window

  netsh wlan show pilot

  and check that the entry

  Hosted network supported: Yes

  appears in the results.

  2 WiFi must be enabled until you issue the following command [it didn't need to be connected to anything]

  netsh wlan start hostednetwork

  and then you should get the answer

  The hosted network began.

  [If you do not have WiFi you this answer - the hosted network could not be started.]  [A device attached to the system is not functioning.]

  3 Once you are happy that you have found the right answer, then stop the network

  netsh wlan hostednetwork stop

  4 then start it for real with a SSID & password

  netsh wlan set hostednetwork mode = allow ssid = TestNet key = password

  and you get the answer

  The hosted network mode has been defined to allow.
  The SSID of the network hosted has been changed successfully.
  The user key hosted network password has been changed successfully.

  5 you can restart [you will have to do at each reboot of the system - there is no need to keep entering the SSID and password the system will just continue to use those you put in during step 4 above].

  netsh wlan start hostednetwork

  6 you can also get some info on how it works with

  netsh wlan show hostednetwork

  I just checked these settings to see what security was that I couldn't connect to my WinXP [but not connected as well a computer Win10 & hotspot a phone]

  7 these are the guides who helped me with my experience in the implementation of Windows 7 to a hosted network.  They go beyond my notes do, they understand the configuration of ICS.

  create wifi hotspot [a thread in this forum]

  How to create setup virtual Wifi in Windows 7 without any additional software

  Errata security Windows 7 includes soft-ap

• Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop. He sees the connection, but still hung on authentication / "obtain an ip address" phase and sometimes loops around that. While this same cell phone is able to connect to wifi hosted on the laptop from my friend, via the same netsh command, also it connects fine to routers wireless etc.

  I noticed that in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" has disappeared. I tried to run the command

  "netsh wlan set hostednetwork mode = command not allow."

  and then

  "command netsh wlan set hostednetwork mode = allow."

  but nothing is done, the virtual wifi adapter doesn't seem to be back. I've updated my drivers for wireless card that is "Intel Centrino Wireless - N 1030 BGN". But still no change, map of miniport does not return. Then I ran the cmd command "sfc/scannow", in the hope that maybe some file is corrupted and he could get fixed, but even after checking and restarting, it was still no effect on wifi.

  So, basically, that is what is happening, I run the command

  "netsh wlan set hostednetwork ssid = keyUsage htc = key command persist = mode abcdefgh = enable".

  and it will

  "Hosted network mode has been set to allow.
  The SSID of the network hosted has been changed successfully.
  The user key hosted network password has been changed successfully. »

  Then I run

  "netsh wlan start hostednetwork.

  and it will

  "The hosted network began.

  But in my network connections section, "Microsoft Virtual WiFi Miniport Adapter" does not appear, instead when the connection is started, "Microsoft hosted virtual network adapter" appears and disappears when the hostednetwork is stopped. But nevertheless, no device is able to connect to this hostednetwork, stuck on authentication / phase "obtain an ip address", as a DHCP server is missing or something.

  Kindly, help me out I searched on internet a solution for almost 2 days now, but nothing helped.

  Abdoulaye.

  Follow the links and check

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/566a63d9-a5f8-4210-a5ee-48411425f5c3

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/86ab166f-0d3d-4b9b-ad7f-4b840221ac33

  http://www.SevenForums.com/network-sharing/14593-Microsoft-virtual-WiFi-miniport-adapter.html

  http://helpdeskgeek.com/Windows-7/what-is-Microsoft-virtual-WiFi-miniport-adapter/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-virtual-WiFi-miniport-adapter/cccc143a-2fa8-41EF-B4C5-20cc233c2720

  http://msdn.Microsoft.com/en-us/library/dd815252 (vs.85) .aspx

• problem with the drivers for the card microsoft virtual wifi miniport... problems with PnP devices

  He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help

  Hi MAGIC,

  It seems that you may need to update your BIOS firmware.

  You may need to contact Samsung for more information, if the update is available for download on their Web site.

  When started this issue is happening?

  You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:

  http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx

  What is the device that has the problem?

  Reinstall the drivers to fix the problem?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver problem with GalaxyTab 10.1 - peripheral USB MTP has a driver problem: Microsoft Virtual WiFi Miniport has a driver problem

  I just a GalaxyTab 10.1.  Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem.  What are the corrections?  My automatic updates are up to date.  is it a problem to Microsoft or GalaxyTab?

  Hi David,

  1. have you received any disk software for GalaxyTab 10.1?

  Method 1:

  You can try to start the Fixit material and check.

  Hardware devices do not work or are not detected in Windows

  Method 1:

  You can try to uninstall and reinstall the device.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the USB device and right click on it.

  c. now, select uninstall.

  d. restart the computer.

  Alternatively, you can download the drivers for your Samsung device from following link:

  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

  2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?

  Method 1:

  Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it

  c. now, select uninstall.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Method 2:

  If you're still having problems, then try updating the chipset and network card drivers.

  For more information, you can consult the following articles:

  What to do when a device is not installed correctly

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Cannot print because there is problem with Microsoft Virtual WiFi Miniport Adapter

  Original title: card WiFi miniport

  Microsoft Virtual WiFi Miniport Adapter has a device problem, it can be reinstoled? How? This problem prevents me you print. Help, please. Thank you

  Hello morning XP,.

  Thank you for the question!

  I'm sorry to know that have problems you with printing. As I understand it, you cannot print because there is a problem with the Microsoft Virtual WiFi Miniport Adapter.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3. do you get an error message when you try to print?

  Reply with answers to help you in a better way.

• Microsoft virtual WiFI miniport adapter has adriver problem

  does anyone know how to fix Microsoft virtual WiFI miniport adapter has adriver problem

  Hello

  Control Panel - Device Manager:

  You can double-click it - tab drivers - DISABLE (that is if you do not use this feature).

  You may not have that unless you try to connect to other WiFi devices via your computer and
  many WiFi devices and their drivers do not correctly support the virtual pilot.

  Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers.
  (Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
  one.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network card (NIC) and is a good time to get the other updated drivers as
  Windows 7 like the updated drivers.

  ==================================================================

  More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not
  support the virtual device or is not required then it can be disabled).

  The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system
  Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
  questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
  known issues (Intel, Realtek, LinkSys and others).

  Windows 7 adds native Virtual WiFi from Microsoft Research technology
  http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/

  How to setup virtual Wifi in Windows 7 without any additional software
  http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htm

  Connectify allows possibility virtual WiFi in Windows 7 machines
  http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/

  On the wireless network hosted
  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  Build a Wireless Home network without router - see Windows 7 section
  http://www.labnol.org/software/wireless-network-without-router/11494/

  Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
  http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/

  =========================================

  3rd Party Solutions

  Connectify is a software easy to use for Windows 7 computers router.
  http://www.Connectify.me/

  Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2
  http://virtualrouter.codeplex.com/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Microsoft Virtual Wifi Miniport Adapter has a driver problem (Code 31)

  Hello I have a small question. It started by I first went to devices and printers and the choice to add a device by mistake. When I saw that I cancel what has led to the blue screen. After that, my computer restarted by itself and asked me that if I wanted to run windows normally choice run windows normally. Then I loged in and told me your computer just a restore from an unexpected shutdown. Later, I noticed that I had a troubleshooting and it said that Microsoft Virtual Wifi Miniport Adapter has a driver uncorrected problem also peripheral Pnp. I tried to go to Device Manager and update of MCWMA, but he said he has not set. What should I do to solve this problem, because im starting to get worried because it is a new computer. Some of my other question about what is Microsoft Virtual Wifi Miniport Adapter and do I need because I can connect to the internet fine wireless. Thank you for trying to help me I really appreciate it.

  My operating system is Windows 7.

  Hi John546,

  Thanks for posting. Proceed as follows to see if your problem persists. Open the Device Manager, under network adapters do a right-click on the Miniport Microsoft Vitural WiFi card and choose disable.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to hide the microsoft virtual wifi miniport adapter

  Is there a way to hide the microsoft virtual wifi miniport adapter lying around in the network connections window?

  I found out how to disable the wlan network service has received, but it does not delete the virtual cards of view.
  I can turn them off, but I really would like to see here.
  Thank you

  Hello

  Unfortunately, this is not possible.

  You can send us your comments.  Follow this link:

  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1

• Download Microsoft Virtual WiFi Miniport adapt

  I want to download Microsoft Virtual WiFi Miniport Adapter but I can not find the download link for Microsoft Virtual WiFi Miniport Adapter! Please, I beg you!

  For information, see - http://msdn.microsoft.com/en-us/library/dd815243 (VS.85) .aspx and http://helpdeskgeek.com/windows-7/what-is-microsoft-virtual-wifi-miniport-adapter/

  If its apparent problems, try to remove/uninstall from Device Manager and reboot the PC to see if that helps.

  But, if there is one, what's your real problem?  It does not say the missing drivers, or you just want to update? If it is enabled in the Device Manager?

• To connect to a network using Microsoft Virtual WiFi Miniport Adapter

  I have a laptop windows 7 and I found the so-called map of Microsoft Virtual WiFi Miniport, I don't know what it's for, but I don't know that it's a virtual wireless card.

  But I can't connect to a network to use it. and I don't know how to connect to a network.
  I DO NOT have any errors, but I just want to know what it's for. :-)
  Thank you.

  Its uses the wireless function integrated hostednetwork that transforms your computer equipped with wireless (WiFi) in a wireless router/access point. I use this feature to connect an iPod Touch (4th generation) wireless internet via my laptop while traveling in places where there is no wireless internet access, but it is wired internet access, IE. to some hotel/motels for example.

  The adpater is not normally used to connect to wireless networks. This work is for your hardware integrated wireless (WiFi).

  http://Windows.Microsoft.com/en-us/Windows7/view-and-connect-to-available-wireless-networks

  Interface based on FWIW you can make use of the hostednetwork function by configuring using netsh wlan set hostednetwork of command line commands or use free programs such as Connectify and virtual router that uses a graphical interface.

• Microsoft Virtual Wifi Miniport Adapter (code of erro, 10)

  Microsoft Virtual Wifi Miniport Adapter (code of erro 10) can not but connect o Nao laptop com o celular Bluetooth e no message control diz o device esta com problema, o driver e a versão 6.1.7600.16385 21/06/2006; e em propriedades mostra a mensagem (Este nao pode ser implies device. ((Código) 10).

  Não encontro uma versão but recent Uso Win 7 64 bit

  Modelo do laptop: HP G42-373BR

  Wireless hardware:

  Broadcom 4313 802.11b/g/n (ok pilot) Version 5.60.350.11 / Date 05/07/2010

  Realtek PCIe FE Family Controller (ok pilot) Version 7.46.610.2011/ Date 06/10/2011

  O Unico com problemas esta sendo o driver card Miniport Microsoft Virtual

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx

• Microsoft Virtual WiFi Miniport adapter connection with "no internet access.

  Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop.

  He sees the connection, but still hung on access to 'internet '...

  netsh wlan set hostednetwork mode = allow
  netsh wlan set hostednetwork ssid keyUsage = HP = key persist = "abcdefgh" mode = enable
  netsh wlan start hostednetwork

  I use this command virtual wi - fi with success with 'no Internet', I created...

  someone can help me...!

  Hey,.

  Visit this link:

  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  If you had installed drivers of the network up to date maps, remove this update. It worked for me.

  Check the steps to remove the software update:

  ·        Go to the Control Panel and open Windows Update.

  ·        On the left side, at the bottom of the window, click the installed updates link.

  ·        In the next window, scroll down and select the update of the NIC has installed recently.

  ·        At the top of the window, click the Uninstall button.