My mouse to walk across the screen

Why my mouse wander through the screen on its own? It is possessed or something!

When your mouse for it, it is referred to as calibrate and it's normal! When it happens, the mouse of derivatives usually 5-10 seconds and then must stop on its own. Let the mouse do 'its time '. Fight against the movement of the cursor is only prolong the process!

Tags: Toshiba

Similar Questions

  • Satellite P10: clouds white and purple fading across the screen during startup

    I had problems with my laptop PC-10 so I bought a new hard drive (Fujitsu 60 GB instead of 40 GB) standard and have it myself. I was working very well with it for a long time, until suddenly I have had the strangest problem that I've ever seen on a computer...

    Sometimes, when you start the laptop, instead of the screen normal red "TOSHIBA" and the message to start Windows XP, the laptop displays simply little weird white and purple clouds fading across the screen, fading finally on a screen very dark, but not quite black.

    I thought first it was a problem with the DVD player, like when he finally gave and started normally, the DVD drive has been disabled. However, I noticed in the BIOS, under "Advanced" the Infrared Port shows intermittently - it shows with the [Disabled] setting next to him, but will be then disappear from the list, then reappear again and then go again and so on.

    Sometimes my computer will function normally, then completely shut (mouse and all) and will restart with the clouds!

    I looked in the Windows Event Viewer for when the laptop has locked up and have seen anything to do with a problem with IRQS for the Infrared Port. I disabled the infrared port in Device Manager (I managed to activate in the BIOS by loading the standard BIOS settings) and rebooted, but it started upward with the clouds once again, so I have the feeling that the infrared port is the culprit - loose connection may be defective material because it is located close to the DVD player and HD player.

    I was wondering if anyone has seen something like this before on any computer, and if they knew how to solve? It seems completely illogical that a defective IR port could change what is displayed on the screen on startup, unless of course there is something wrong with my HD boot sector?

    Any ideas?

    Thank you.

    Tom

    Hello

    I've never seen like this problem before and I don't think that this issue has something to do with the HARD drive or the IrDA port.
    As much as I know the IrDA port is not available on Satellite P10 - xxx

    For me, this looks like a faulty screen or graphics card.
    Have you tried to connect the external display? If this isn't the case, then try to do and check if it also appears on the external display.

    I recommend also to recover the laptop with Toshiba Recovery CD and then check the functionality.
    But if the malfunction appears so I would recommend contacting the Toshiba ASP for control from laptop

  • Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

    Original title: cursor goes wild

    My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

    Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
    I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
    You also need to update any driver mouse if possible.

    Let us know if that helps.

    Marilyn

  • NB100 - mouse cursor flies around the screen

    Hello

    So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

    Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

    Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

    In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

    Help, please! I would be eternally grateful...

    Thanks in advance, Nadia

    need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

  • Re: Equium M50-216 - lines across the screen

    Hi my Equium M50-216 has lines across the screen and low who go up and down the screen.
    There is no picture it s just white.

    If I plug it into an external monitor I get a fine display on the monitor is so the screen is defective or something else?
    I think that the inverter is ok because it of bright and not dull.

    See you soon

    I agree with Luke.

    If the image on the external monitor is ok then the graphics card should be ok.
    If an FL inverter would be defective then everything would be visible, but just a little more dark and as behind a fog

    In your case, it looks like a display problem

    I think you should ask a technician for replacement laptop

  • Satellite L830 - horizontal line across the screen

    All new Satellite L830 has a horizontal line across the screen.

    What can be the cause and how can be fixed?

    If the laptop is brand new it back as soon as possible and ask for replacement.
    On this virtual path, it is not easy to say what the problem is here, but it may be related to faulty display, especially if you can see from the first moments when the laptop is turned on.

    Don't try anything. Request a new one. If you can not new, contact the nearest Toshiba service provider and ask for help. They need to exchange the defective part.

  • HOW IS IT MY MOUSE JUMPS AROUND ON THE SCREEN, OR STOP SUDDENLY

    my mouse jumps all over the screen, and it suddenly stops moving.

    Test your mouse on another PC. If the problem persists, the mouse is defective.

    Test another (known working) mouse on your PC, if the fault persists your PC is faulty somehow.

    It's a mouse laser (light rather than a rolling ball works)? If it is try different a surface or a mouse pad. Some surfaces, e.g. mouse pads and mousepad hologram photo will lead crazy optical mice.

    If it is a bearing ball mouse, clean the rollers inside.

    It is USB, PS/2 or series? Wired or wireless? Check the battery if wireless.

    TRicky

  • I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

    I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

    Hello

    You will need to reverse the clean boot, as it is either incidental compared to
    the real cause of the problem. What, where you try to fix initially using the cleanboot?

    You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
    The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
    Right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure) is
    CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
    3.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can do a repair installation that needs to save the data, but you will
    to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
    will need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

    I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

    I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

    =========================================
    The info... copied on the net... may be useful:

    =====

    The Green problem bar setting in Windows Movie Maker
    http://www.bernzilla.com/item.php?id=884

    When I tried to follow the directions, I was unable to find XVid on my
    computer.  So I googled XVid and then (I think) the 2nd entrance to
    Download XVid.  After I downloaded it, I could follow the directions
    bernzilla and when I published a video - Voila! no green bar!

    After thick film Green line is published
    http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

    =====

    Good luck...
    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Satelite C50D-A-133 - Touchpad not working/mouse not visible on the screen

    My mouse will not be displayed on the screen and the touch pad does not work, it's happened a few times but it still works again in about 20 minutes.
    This time, it has not worked all day. If anyone knows how to fix this please please help.

    I have class that I have to do and it will count for 25% of my grade I have to do and I really need to be able to fix my laptop

    Thank you

    Hello

    Can you please provide some info on your laptop?
    You use Windows preinstalled original that you got with your laptop?
    Have you tried to turn the touchpad on or off using the F key or other hardware settings?

    Have you tested the feature with an external mouse?

  • Cursor jumps across the screen.

    While trying to navigate around my screen with my mousepad to laptop, the cursor jumps randomly offline.

    • ex: when you try to click on the scroll bar (on a Web page) at the bottom of the page, the cursor jumps to the top of the page.
    • ex: on the desktop, I'll move the cursor over an icon, and the cursor will move to a random point on the screen and continue to move in the direction my finger, said that on a new path.
    • Sometimes, the slider works very well.
    • The problem occurs when you use any program.
    • I don't have the problem "while typing, my mouse moves and clicks on".
    • The movement is just a quick jump from point a to point b. (not rapidly moving around screen clicking everything)
    • If you need more info leave me a message.

    Specifications of the computer:

    -Laptop computer Dell: Latitude D620

    -Race: Service of Windows Xp Professional Version 2002 pack 3
    -Computer: Genuine Intel(r) CPU

    @1.83 GHz T2400
    987 MHz, 1.00 GB of RAM

    Properties of the mouse:

    Typical laptop mouse (the one under the space bar on the keyboard)

    Driver Date: 7-1-2001

    Driver version: 5.1.2600

    Thank you

    Rollwtide88

    This can occur if your version of windows is not genuine. Please call Microsoft for even better your current situation.

  • optical mouse is frozen on the screen

    XP Pro - optical wired mouse symbol is frozen in the middle of the screen. No manipulation of the mouse causes the symbol to move. No change on several reboots. The machine is Vostro 220 HP. The mouse works normally on another machine. Can anyone help?

    (Make and model of the mouse would be useful.)
    What is a USB mouse? If this is the case, it is correct, or "find new hardware", if you unplug it and plug it in again?
    If this does not work, unplug the mouse, uninstall the driver software, reboot, and reinstall the mouse and software.

    SC Tom

  • the mouse regularly hangs on the screen

    Mouse freezes on the screen and the computer breaks down regularly. How can I stop this. I am currently running windows XP

    Hello

    1. What is the brand and model of the mouse?
    2. don't you make changes on the computer before this problem?
    3. the mouse works initially after the computer is turned on?
    4. did you try to use the same mouse on another computer and check?

    Step 1: Run the fix it tool in the following article and check.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

  • Why my mouse pointer scrolls off the screen to the right

    Installed a wireless network adapter by using what I think was the wrong driver. Cannot remove properly. At the time my mouse and Window Media Player begins to act. The mouse pointer goes way off the screen to the right and no other borders. Window Media Player opens wider than my screen. That is what it is?

    Hello

    · What is the number and the model of the computer?

    · Have you installed the drivers on the manufacturer's Web site?

    · Do you receive an error message or error code when you try to uninstall the drivers?

    Use the back to roll on the computer that will replace the network to the previous state driver and check if the problem persists: how to use Roll Back Driver Windows XP: http://support.microsoft.com/kb/283657

    I suggest contacting the manufacturer and then install the wireless network card drivers.

  • My mouse has frozen on the screen - what do I do?

    My computer was working OK.  Then the cursor froze on screen.  I couldn't shut the computer down and so just shut doen the power.  I turned on it once again, but the cursor is always fixed on the screen.  The light on the mouse.

    Any suggestions?

    Thank you very much

    L

    My computer was working OK.  Then the cursor froze on screen.  I couldn't shut the computer down and so just shut doen the power.  I turned on it once again, but the cursor is always fixed on the screen.  The light on the mouse.

    Any suggestions?

    Thank you very much

    L

    I have an Acer Intel S5 with Windows 7 installed. I had the same problem, that my mouse touchpad & screen FROZE. I couldn't even turn off the power. I did a Google search & followed all instructions to fix the problem, but none of them worked. All was not lost. I just waited the battery to impoverish & the computer is off. I then plugged the power supply & noted AMBER light, showing that the power was connected load. I continued my work on my desk, & after a few hours, noted the amber light goes out & turned BLUE, having shown that it is fully charged. I had no problem if the laptop is turned on by the normal method, & all systems, touchpad mouse was working 100%.

    Hope you find it useful. Give it a try & put your comments on this site or on Facebook. Cheers, Lionel. "down Under, Perth WA.

Maybe you are looking for

  • Cannot find where the status bar features have migrated

    I already read the article on the tray removed, but supposed to substitute (line pop up indicating the status "pending" when you clicked on the link) does not work and does not at all appear. I sit and watch do not change window and guess what happen

  • display the chart created in primary vi into a Subvi

    Hello world I can't see the graphics created in primary vi into a Subvi. Help! Thank you

  • Stop code 0x0000008E

    I looked far and havnt seen anyone with this stop error message, a few trinkets on whats the cause? 0x0000008E (0xc0000005, 0x006E6940, 0xB2931B3C, 0x00000000) Thanks for your help!

  • Mode of AHCI BIOS HP Pavilion A6230N

    I have a HP Pavilion Desktop PC, model No. A6230N and I am trying to configure the SATA controller to use AHCI instead of (I think) FDI, because I want to install OS X Snow Leopard as a second operating system on the computer, but nowhere in the BIOS

  • BlackBerry Smartphones unable to validate the e-mail account

    I can't validate my email despite instructions account sent to me by BlackBerry. I get this error message: "An error occurred during validation of the email - please check your information and try again."