My MX430 keeps going offline and will not print

Similar Questions

• My MX432 keeps going offline and will not print.

  It is connected wireless. It worked just the other day. It is now offline. I rebooted the printer and the computer. In the past, by restarting the computer solved this.

  I Win8 (unfortunately). It is not defined for use in offline mode. The port (WSD-423...) is made for this (my only) printer.

  Hello.

  Uninstall and reinstall the drivers should fix this problem.  Please, perform the following steps:

  1. click on start and open the control panel.

  2. open programs and features.

  3 uninstall the drivers MX430/MP and the Canon IJ Network Tool.

  4. close all open windows.

  Once this was done, we'll reinstall.  Please visit our website on the following link to download the latest driver for Windows 8 MP:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx432#Dr...

  If additional information is required, please call us at 1-800-OKCANON.

• MX492 keeps going offline and will not be airprint

  I bought a new Pixma MX492 and a new imac with ver El Capitan 10.11.4. I installed the wireless printer and was able to print from imac and also airprint from ipad.  But continues to go to the printer offline, on the imac and ipad (don't get the message "no printer found airprint") and after I have turn the printer off and on again it will print but then will be distributed offline. Help!

  Hi Bobt53,

  Disabling the IPv6 setting on the printer may resolve connectivity encountered problems.  To do this, please follow these steps:

  1. Press the Setup button on the printer.
  2. Press on the button until the device settings appears.  Press OK.
  3. Press on the button until that network settings appears.  Press OK.
  4. Press on the button until other settings is displayed.  Press OK.
  5. Press on the button until TCP/IP settings is displayed.  Press OK.
  6. Press on the button to select IPv6.  Press OK.
  7. A message scrolls on the screen.  Press OK.
  8. Press OK to enable/disable IPv6.
  9. Press on the button to select inactive.  Press OK.

  If you continue to have problems after disabling the IPv6 setting, we ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays).  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• Printer is offline and will not print documents

  Printer is offline and will not print documents, the rocker switch "Printer offline" option is not available and it is constantly check on 'printer offline '.

  How can I fix this so I can print the necessary documents?

  Hello destiny.

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • Is the printer connected directly to the PC or it is on a network?
  • What is a printer wired or wireless?
  • What is the brand and model of the printer?

  Try the following and see if it helps.

  Method 1: Disable Antivirus

  If you have installed any third party such as antivirus or firewall security software, I would say you temporarily disable and check if it works.

  Disable the anti-virus software

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2: Update the drivers for your printer.

  For more information, see these links:

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  
  Method 3: Restart the print spooler service.
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.

  If nothing works, then manually add the printer to the local port and check.

  Method 4: Manually add the printer to the local port.

  a. go to control panel and click on devices and printers.
  b. click Add a printer, and then select Add a local printer. Click on create a new port. The default value in the drop-down list is Local Port. Don't change that.
  c. click Next.
  A dialog box appears for you request that you enter a port name. Type the name of \\computer name\printer.
  d. type your user name and the name of the printer (name \\PC\printer)
  e. click ok and exit.

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.

• My printer keeps going offline and I cannot print anything. How to stay online. It prints well to cdomputer one another. It's a wireless connection

  I have a wireless HP Photosmart D7460 printer. I can not print anything because he always tells me that it is in offline mode. I tried to turn off the PC and restart but it is still offline.  How do get to keep it online. The printer prints fine from another computer.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/network-printer-shows-offline/e8f11d82-9938-4A75-9BBF-5750731da24e

  It will be useful.

• c 510: hp estation 510 is offline and will not print

  recently changed wireless carriers, and now my printer is not working.  the screen of the computer says printer is offline.  the printer says its connected to the wireless network.  Help!

  I uninstalled the printer from my computer and then reinstalled.  It worked!

• Envy4500: Computer says printer is offline and will not print, but it's online

  I jumped through all the hoops of tech and there seems to be no perfect solution to this problem. However, can I change my settings wireless direct on with security on without security on Off, and at any time, I am doing this, work in Quebec will begin. But I have to do it almost everytime I have print something. I need to scan from my remote IO. Let me know if HP has a better solution. Obviously, the computer is not properly talk to the printer. I started having this problem after Windows 10, but yet curiously, so I don't think it's a matter of Windows.

  Hello
  
  Thank you for using the HP Forums.

  You can try this:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• my printer says offline and will not print. How can I get this back online?

  I tried to reinstall my printer. I also tried have disconnected and reconnected everything in.  I tried to turn my computer off and turn it back on and it still says disconnected and won't pring

  Try opening your control panel, click Printers and right click on the printer in question and choose printer use online, which takes at least my printer from offline on loan...

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.

• Printer has gone offline and will not now come online

  I have a printer HP laserjet P1600dn running on a hp with Windows 7 {64-bit} touchsmart520.  The printer is online when I went to bed last night; She is now in offline mode and will not come back on line.

  First thing I tried was to change the USB port.  Without success.  Then I changed the usb cable.  Without success, I pulled the power plug, waited 30 seconds and plugged in.  Nothing.  After each step, I restarted the computer.

  I am at a loss.  Someone at - it any other ideas?

  Hi eyore15,

  I understand that your LaserJet Pro P1606dn went "offline" and now you can't get the error cleared. I will do my best to help you with this problem.

  In this document for "Printer is off-line" Message appears on the computer and the HP printer does not print, are steps to resolve the error offline.

  I hope this information helps, please let me know how things are going.

  Thank you

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• How do U get rid of an element of U, sent to a printer dell 305? I tried to cancell the print job because apparently, he hung up and will not print, but I can't get out of the what.

  I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?

  Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.

  Hi, dadzippytr,

  Click Start and type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on the spooler and select stop

  Wait for Windows to stop the spooler

  Close the window

  Control Panel > printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the window

  Start > right click on computer

  Click on manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printers

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Restart the computer

  Windows will reinstall the drivers

  Go to the manufacturer's website and search for updated drivers

  Don't forget to come back to services and start print spooler before printing again.

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• Paper textures for CS6 Adobe keeps showing invalid and will not be installed.

  I downloaded the add-on of the Russel, textures of paper and tried to install with AEM but, said the package was invalid and could not install.  I've updated PS and AEM and tried again, this time it exceeded the contract and then failed to install screen.

  I tried to change the to.zip of extension .zxp, but then it says Windows cannot open the zip folder is not valid.  What is going on?  I got it on my work PC last week before the main hard drive died and I had to reinstall PS.

  Thank you Trevor.  In true cliché, I turned the computer off last night and this morning it installed no problem.

• HP LaserJet Pro MFPm127fw: Printing Chromebook stuck in class and will not print

  My printer cannot print - things are still ongoing, but stay there for days until I delete them.  Everything is turned on and connected.  This printer has printed successfully for me before, but it goes through these phases where it stops printing and it has not printed for a week now.  I uninstalled, re-installed, all done.  My HP Chromebook detects the printer, shows pending print jobs, but they do not print.  Other aspects of the printer are very good, IE. Fax works.  I even don't try to use the email address to send documents to the printer... nothing works.

  I'd appreciate any help.

  Thank you

  Hello

  Please try to use printing HP extension for chrome to see if that helps. I've included below installation instructions.

  http://support.HP.com/RS-en/document/c04683559