My Nano Gen 7 is recognized on a single computer, but not the other

Similar Questions

• Satellite A100-411: one or the other DVDs cannot be recognized

  Hello

  I work with my new Toshiba a100 411 since the end of February here at I m happy w / my choice.
  The only point is that I found that one or the other DVD cannot be recognized by the Pioneer K17A.
  Need me possibly new drivers?
  Thks in advance for yr help.
  Jürgen

  Hello

  Hmm I n t think so.
  As far as I know that these drives support not all CD or DVD and it s nothing unusual that one or the other DVD may not be recognized correctly.

  Sometimes a firmware update could allow the reader to recognize more kind of CD and DVD, but on the other hand, no one can say that this update might help.

• Importing photos from older iPod Nano(Gen 5)

  Photos has been synched to the iPod using a PC/iTunes.

  The PC was stolen later and now iTunes doesn't want to replace iPod everytime I try to sync.

  Ideally I would simply copy photos on PC/laptop(outside iTunes-for fear of deleting the photos which now only exist on the iPod Nano)

  The search for solutions, but all seem to be involde 3rd purchase third-party software solutions.

  Apple/iTunes/iPod really allows for export/transfer of photos of the Apple device without installing iTunes-origin?

  Photos of the iPod are stored in a special way.  During synchronization, iTunes converts photos to fit small iPod screen and stores the data in a special database format.  He comes to optimizing works iPod displaying the photos and save the storage space on the iPod.  As with other types of media, iTunes sync in generally in one direction, from iTunes to iPod library.  You can't use iTunes to retrieve the photos on the iPod.

  NOTE: The exception is IF you had a setting is enabled during the synchronization of photos to the iPod.  There is a setting on the display of pictures of the iPod settings in iTunes (where configure you synchronization for photos) to photos full resolution Include.  IF this parameter is enabled when Sync you photos to iPod, you can find and recover the original files of the image in the folder of Photos on the iPod (with disk use enabled) storage, using the file manager of your computer.

  There may be third-party utilities that can recover individual photos of the iPod.  However, the photos are generally lower resolution versions of the photos full original resolution, because they have been converted during the synchronization for the small screen of the iPod.

• I disassembled my iPod Nano Gen 1 and the battery is larger than its supposed to be and will keep your not responsible

  So I found my old iPod Gen 1, I'm going to play with her and she turns that I plug it into the wall it says its loading works fine, while it is plugged in. Said his charge that I unplug the screen just disappears and turns off. I go to turn it back on nothing. I thought it was strange, I connected it to my computer and it says: "Please wait battery is very low" so I searched here and I couldn't really find anything except to reset it and glitch it thinking that the battery had more in it that's the case, or something so it would connect and start charing so I tried. Except that I had a small problem that makes the select button was broken. So I ended up just say lets just take it apart I did I pulled aside and then when I take part (I was watching a video on how to disassemble) the battery was 4 times bigger and oblong and stuck to the pretty good iPod. It was difficult to maneuver it is BC. He was stuck and big enough and I didn't want to damage it. But I ended up making out and took a picture I don't think that its supposed to be this great! (Also the selection button is now fixed the battery was putting pressure on it so that it wouldn't work or something because it wasn't working until I removed the block him now his works very well (the key not the iPod))
  Attached picture is battery (sorry for the bad quality and angle)

  You will need to buy a new iPod.  Cells swell like that when they fail.  Since the opening of the device, any chance of an out of warranty replacement (if there was a chance) disappeared.  I'm sorry.

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• Recognized SD card but not visible

  When I insert an SD card into the reader, the card is recognized, but not visible in Windows Explorer or another program. In the hardware menu information, the SD card reader works properly.

  No idea how to solve this problem?

  Kind regards

  Jack

  What cell phone do you have?
  What SD card do you use the SD card reader?

  Look in your user manual if your SD card will be supported and check from Toshiba Web site for an update of the BIOS.

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• X 1 carbon Gen 2 plugged and not chargin, but not full battery

  I have a problem that my battery started a few months only to charge random percentages, or 45%, 60%, 70%... etc... with the famous "plugged not charging.

  It's Lenovo Gen 2, about 15 months, and the battery is at 23.3%.

  All tests show the battery is functioning normally.

  Suggestions, which can cause the battery stop load random percentages? all I can do to fix?

  Thanks in advance.

  Oh, that indicates the battery is almost dead.

  Under win7 and Lenovo Power Manager, you can reset (gauge) battery. But this (the number of cycles) condition means that it would be a temporary solution of some sort.

  So, try to get a new battery.

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• new hard drive recognized in the device mgr but not my computer how to format?

  bought a new hard drive for additional storage running on xp home SP3.  It is recognized in the bios and in Device Manager but not on 'my computer '.  How can I access it to get in shape or to install the NTFS file system on it (if the formatting is incorrect terminology) then it will become usable as a storage device.

  You use the disk for this purpose.

  Start > run > diskmgmt.msc > OK

  Right-click on the unallocated space, choose New Partition and use the wizard to (a) define a drive letter, (b) the size of the partition and (c) format the newly created partition.

  For step by step directions: http://support.microsoft.com/kb/309000

  To keep things simple, to stick to "basic disks and volumes" and "primary partitions" (you can have up to 4 per physical disk).

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use? _ ___Windows IPod XP compatibility

  We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use?

  If you can install and run iTunes correctly, then I'm sure that sync with an iPod will work as well.

  What do you mean exactly with "add to iTunes"?

  Tim Baets
  http://www.BM-productions.TK

• 750 GB Seagate replacement drive not recognized in my computer, but show up in the BIOS

  I'm sorry if I break label of forum, but I was afraid that my previous ad in the "Resolved" issue Seagate can be neglected...

  The Seagate firmware problem would explain why my replacement HP 750Go drive, happened today to replace my crashed, is not recognized by my computer?

  A bit of history: after 2 months of operation, my new HP Pavilion a6750f desktop PC crashed, with the 750 GB drive omitting all Smart tests. While replacement is put in the mail, I bought a 1.5 GB Seagate and used to get on yesterday's recovery software. Today, Seagate 750 disk arrived, so I installed as a storage drive (to make backups to avoid another disaster). The BIOS reports as the 3rd disc, ST3750630AS and SMART spent testing.  But it does not appear on my computer (so that I can format it, if necessary.)  When I installed Nero Backitup 4, you can also see the drive, but there are no partitions.

  Issues related to the:

  1. How to format or get this drive recoginized?
  2. Can I install this download of the firmware on my 1.5 GB Seagate, my 1.0 GB of Seagate (another storage drive) and the 750 GB Seagate? If Yes, when I reboot, can I select which drives to apply to?

  Thank you!

  It does not appear there, either.  As soon as Vista SP1 download is finished, I'll check the connectors. However, as it appear in the BIOS and in Nero Backitup, but not in my computer or disk management, it looks like a different problem...

• On laptop CD/DVD drive is not recognized/is missing. Having read the other topics, problem still not solved.

  I'm on a computer laptop gateway and my cd player does not work all of a sudden. I can eject and put CD in there and it will hum for awhile, but nothing will happen. I went to Device Manager and it is not yet listed. I read the other topics and the problem is still not resolved, please help. Also, my HKEY_LOCAL_MACHINE folder has not all folders in there, so I can't go to system/etc to delete anything because there is nothing to remove. Thank you for your time

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers to check with the system manufacturer to see if there is a firmware or drivers for your if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.