My network list Service light not... even when I get the dialog box asking if I want to this service turned on!

HP Pavilion dv6000 VISTA Home Edition

Of 1989 fix tomchen:

Click 'Start'-> 'Run'-> type "dcomcnfg" and enter-> find: Component Services/computers/my computer/DCOM Config / netprofm-> right-click "netprofm"-> click on 'Properties'-> 'Security'-> 'of launch and Activation Permissions"changed to 'Customize'-> click on the button"Edit"-> click"Add." -> type 'LOCAL SERVICE', such as object names, click 'OK'-> in 'Permissions for LOCAL SERVICE', select 'Allow' to 'Launch Local' and 'Space between'-> 'OK'-> 'OK '.
with positive comments:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/network-list-service-will-not-turn-on/fbbda2cc-1609-4628-A21B-b77c180c148b

Tags: Windows

Similar Questions

  • Msconfig does not start when typed into the starting box?

    Msconfig does not start when typed into the starting box?

    Original title: windows

    What is the listed program in 'C:\Windows\System32' if you look in Windows Explorer?

    If this is the case, it starts if you click on it?

    Update your anti-virus software and run a full scan.

    Then download, install, update and run a full scan with malwarebytesfree. (Keep free, no need to enter in any trial etc.).

    Then run a sfc/scannow to see what that brings.

  • When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

    Error image system original title: windows 7 0 x 81000036

    I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

    I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

    any ideas?

    Hello

    ·         You have created a system image backup before that?

    ·         You did it changes on your computer?

    ·         Is your esata formatted NTFS drive?

    Try to save the image of the boot system: http://support.microsoft.com/kb/929135

    Note: make sure that you start the computer in normal mode after a repair.

    See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

  • How to get the dialog box 'Disconnect network drive' with command shell in WIN7?

    I know, when I run the following shell command can get the dialog box "map network drive".

    RUNDLL32 SHELL32. DLL, SHHelpShortcuts_RunDLL connect

    But what is the command to get the dialogue box "Disconnect network drive"?

    Thank you!

    Hello

    Thank you for visiting Microsoft Community.

    I recommend you post your questions on the TechNet Forums for the best and expertise advice. See the link below or more information:

    https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  • Why the link to this document does not even when I use the latest version of Acrobat Reader DC?

    I installed the latest version of Adobe Reader DC on my laptop Windows 8, but I can't always open the file from the link below. I asked my colleagues to try on other machines at work and at home, and in almost all cases, the link opens. Are there settings that I can change to fix this?

    http://EASA.europa.EU/system/files/DFU/fo.IORS_.00044%20Technical%20Occurrence%20Report.PD f

    The link is located on the following Web page, it's the link at the top ('related technical incident form') the area of downloads (top RIGHT).

    Marie-Hélène - internal accident report system | EASA

    Thank you

    Google Chrome uses its own PDF Viewer. If you want or need to use the Adobe Reader plugin, you will need to use another browser.

  • Remove the dialog box no longer appears. How can I get the dialog box to delete return? I want to delete the pictures from my hard drive not only lightroom

    I use Lightroom as my main photo organization, so when I want to delete a photo, I want to be able to delete if my hard drive most of the time, I rarely remove photos from catalogs or collections, so having only not the pop-up dialogue box more is a real problem for me.

    Also, what would be a good way to discover photos that has not removed the disc so I can delete them? is it possible that I can synchronize one catalog to another? @

    You try to delete from disk or a Collection?  If the attempt to delete a Collection, it does not work.  You must use the files if you also have the ability to delete from the drive of

  • When I try to download Illustrator, I get a dialog box asking me which application to use to open the link.  I thought a download of software was just a .exe file - I have no idea how to proceed.

    I was hoping to use Illustrator today, so I bought it.  But I'm stuck at the stage of download with a dialog box saying that I have to choose an application to open this type of link (it mentions .aam)

    Sewn,

    If you use creative cloud, first install the Adobe Creative Cloud Desktop application:

    Download Adobe Creative apps for the Cloud

    and then use the Adobe Creative Cloud Desktop application to install applications:

    Using creative cloud | Download, install, update or uninstall applications

    If you purchased creative suite software, check out these links:

    Suites and programs CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 , CS4 Web Standard | CS3

    Each page contains a link like this to help with the instructions:

    "After you download the installation files, instructions to extract the files and install your product."

    If this method doesn't work well for you, you can download directly from this site:

    CS 3, 4, 5, 6:

    http://prodesigntools.com/Adobe-CS6-direct-download-links.html

    http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

    http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

    http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

    Guinot

  • Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

    Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
    Keyboard is fine.  Is this a compatibility issue?

    ---------------

  • "MB Ethernet Slave Demon.vi" connection lost when opening a windows dialog box in my application

    Hello everyone,

    I am currently working on a LabVIEW application that communicates with a PLC using a Modbus Protocol (with an ethernet cable). The PLC is the master and the PC is the slave.

    The code is based on the Modbus of LabVIEW examples: "MB Ethernet example Master.vi, MB Ethernet example Slave.vi and MB Ethernet slave Demon.vi. It is not the first time I use it.

    But I recently discovered a problem. In my application, I have a pop-up with a button that opens a windows dialog box to select a result file.

    When the windows dialog box opens, the "MB Ethernet Slave Demon.vi" crashes (I put a meter inside to see what happened and it stops at the moment opens the dialog box), then when I close the dialog box, the counter continues to count, the connection ID is empty, and the number of the demon slave VI connection resets to 0. When communication is re-established between the PC and PLC (like 10 seconds after the closure of the dialog box), the number of connection go to 1 and table of login ID is no longer empty.

    Otherwise, the communication works very well. But not when the dialog box opens and is a significant problem for me because the user must be able to open results file during production that needs the Modbus communication at work because it's the controller who gives orders the computer to run the production cycle.

    Thanks in advance for your help.

    If you think that the problem is inside the library NI Modbus (old), why don't you use the most recent which is available on the network of tools? Link is here: https://decibel.ni.com/content/docs/DOC-30140

    Looking into some of the screws in the library, she uses methods of Server VI as "Run a VI" that will perform the loop of the root, as it crashes while the file dialog is open. I suspect that the new version of the library is not the problem.

  • How can I get a "Détails" view - as the default - when you download a file, in the dialog box "enter the name of the file to save on...» » ?

    When I get an attachment to an email (using Zimbra Imail, Firefox, Windows XP Pro) and I click on it and select 'Download', I get the dialog box "enter the name of the file to save on...» "(because I already have the option"always ask me where to save files. "But the view of default file always in a 'list '. At least recently. I don't remember it always does this. In any case, I want the value default to a 'Détails' view, in ascending order, I can find then things so much faster that way. (I often use the 'Update' tab to bring up, the latest version of a file.) I know that I can go to the Menu 'view' icon and select 'Détails', but whenever I go in a sub-folder in this dialog box, I have to do this all over again and it wastes a lot of time and attention.

    I did some research on the internet but have not found a way to solve this problem.

    Try this:

    a. open my documents, press the alt key.

    b. click on Tools. Click on folder options.

    c. click on the view tab and select Reset and check records.

  • Dialog box asking administrator password when installing Security Essentials.

    Hi, I messed up my computer laptop girls while trying to set up for him. My account had me as admin, but as I downloaded security essentials is a dialog came asking if I had started this procedure. I clicked Yes, then the dialog box asks the administrator. the password that I've not enabled. Am I just missing the admin.account when I pick it up or am I just a standard user in the future that cannot get its essentials? Laughing out loud.

    Original title: my user account changed

    Hello

    • What operating system do you use?

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

    http://support.Microsoft.com/kb/940765

  • Satellite A300-PSAG8E - drive HARD light flashes even when I do nothing

    These are my problems

    1. my HARD drive indicator flashes even when I do nothing (flashes every half second or more)

    2. when I go somewhere my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.

    BIOS upgrade to the version 2.20

    OS: Windows 7 Ultimate
    Laptop: Toshiba Satellite A300-PSAG8E

    Someone knows the solution?

    Need help please! Thank you

    > 1. My drive HARD light flashes even when I do nothing (flashes every half second or more)
    Even if you n touch cell phone t, the disk is running and different applications, access data. Applications and processes that are running in the background cause this blinking. Notes; This isn't a problem!

    > 2. When I go somewhere, my screen turns off and when I move my screen mouse lights up but nothing happens. Everything stands still (sometimes 20 seconds, sometimes 2 or 3 minutes) and it is ready to operate.
    Disable the support by modem and disable the settings turn off the screen while the laptop is not in use. This is possible in the Windows 7 power management.

  • My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

    My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

    It was AC off recently?

  • Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

    I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

    Firefox Pei
    "C:\Program Files (x 86) \Mozilla" PEI

    Nothing happens with every order.

    I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

    If you have any ideas, I had appreaciate that your expertise!

    Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
    you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

    Fix Firefox problems caused by malicious software

  • KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

    original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

    I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
     
    Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
    Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
    Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
     
    I have an ADSL broadband, with a Linksys EtherFast PCI card.
     
    Then I got SP3, which installed without any problems.
    So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
     
    Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
     
    After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
     
    My update setting is to let windows download ('important') updates, but let me choose when to install them.
     
     
     
    What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
     
    I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

    Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

    Comment 2: If you will not contact the MS Support on this issue?

    ~~~~~~~~~~~~~~~~~~~~~~~~~~

    Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

    Repost...

    1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

    2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

    3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

    ... I guess that clearing the browser cache does not erase 'downloaded' updates.

    Nope. If you want to clear the queue of the update...

    OPTION A:

    1. stop the automatic updates service:

    Start > run > (type or copy/paste) services.msc > click OK
    Double-click automatic updates > click stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK

    Open the download folder and delete its content
    Close the window.

    3. start the automatic updates service:

    Start > run > (type or copy/paste) services.msc > click OK
    Double-click automatic updates > click Start
    (Starting the service will take a moment)

    OPTION B:

    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

    2. make disappear/close the Troubleshooter automatically pop up.

    3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

    4 reboot.

    Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

    Check the located log file...

    C:\Windows\Debug\ MRT. NEWSPAPER <>

    Related...

    ... This leaves us with the malicious software removal tool don't appear not.

    I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

    It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

    ================================================================
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

Maybe you are looking for