My new CANON Imageclass MF4450 won't print or scan

I just installed my new Imageclqass MF4450 Canion multifunction

printer.   It prints or scans

Contact Canon to see if there is a test or a diagnostic process, you can use to see where the problem lies.

Tags: Windows

Similar Questions

  • Photosmart C6280 all-in-one: connected LAN network won't print or scan

    I am running Windows 7 (64-bit) and have a HP C6280 connected to my local network. My NetGear router shows the printer as a device on my network. Windows Control Panel will display as loans and set printer as default. When I try to print, the release of the coils for the print spooler, but then shows a printing error and nothing prints. HP Solution Center shows as disconnected printer.

    HP print and scan doctor can see the printer but cannot print a test page for it or fix the problem. Cannot printer Windows troubleshooting. I put manually the printer IP address and it corresponds to the IP address used by the pilot, i.e. 192.168.1.107

    The only way I found to solve the problem is to completely uninstall and reinstall the printer and all the HP software associated with it. And then I have to do it again on all 2-3 days.

    Any ideas?

    RnR,

    Thanks for the suggestions, but I did that already, severl times. It turns out that BitDefender Firewall was interfering with my connection on printre network. After fixing manually the printer IP address and establishing a zone of confidence for the IP address of the printer for, things seem to have settled down.

    Found this solution in the HP Forum.

    Thanks for the help of yor

  • New HP Photosmart 7520 won't print from the photo tray

    EDIT: He will feed from the phototray if I print the photo in Windows Photo Viewer.  However, he still refuses to print directly from the jpg format, even if I specify explicitly in all the settings I want to print a 4 x 6 from the photo tray.

    Is this a normal behavior?

    I guess it would print correctly from other photo editing and look at software, but haven't checked that yet is not sure.

    PREVIOUS POST:

    I just got this printer and cannot print from the photo tray.  He printed from the phototray during installation and configuration, but it was the only time.  The rest of the time, when I try to print a photo, it selects only in the regular paper tray.

    Is there a magical procedure involved?  I have an operating system of Windows 7 and just installed on the HP site.  I uninstalled and reinstalled, but it still does not work.

    I load a sheet in the phototray, make sure that the correct printer is defined, select the paper size (in this case 4x6in photo sample provided with the printer paper), select HP Everyday Photo Paper, glossy paper, click on print and the printer does not take into account the phototray and prints from the regular paper tray.

    I've scoured the web and answers do not solve the problem.  It's very frustrating.  If I can't get this resolved in a day or two, I will back this printer and will try another brand.

    These settings should always print to the Photo tray.

  • Canon MX922: Why won't my scanner scan color photos?

    Hello, my Canon MX922 produced copies of any color, but when I scan a color photo, the results of the analysis of a color photo are only in black & white, even when I push the Start button 'color' to scan.  However, the scanner will produce color documents scanned.  Please adivse how/where I need to adjust the settings to produce color photos scanned copies.  Thank you!

    Hello!

    In order to ensure the most accurate information is provided, we will need to know the version of Windows or Mac, in use.

    If it is a time sensitive question, our team of technical assistance to the United States is standing, ready to help you 24/7 by Email http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

    Thank you and have a great day!

  • HP photosmart psc2410xi won't print or scan

    windows7ult running. Dell laptop about 2 weeks ago my hp psc2410xi all-in-one photosmart stopped printing & scanning. The power stays on with glass display time. Have crossed all the hp forums, audited cartridge & ink is fine. changed the usb cables, restarted 5different ways, solve problems with windows, microfix, scan doctor, checked the update windows, uninstalled & reinstalled, cleaned printer did everything, I'm at my witts! All of a sudden everything just stop working without any kind of problems etc... Please y at - there anyone out there that can help me?

    windows7ult running. Dell laptop about 2 weeks ago my hp psc2410xi all-in-one photosmart stopped printing & scanning. The power stays on with glass display time. Have crossed all the hp forums, audited cartridge & ink is fine. changed the usb cables, restarted 5different ways, solve problems with windows, microfix, scan doctor, checked the update windows, uninstalled & reinstalled, cleaned printer did everything, I'm at my witts! All of a sudden everything just stop working without any kind of problems etc... Please y at - there anyone out there that can help me?

    The multifunction device copy yet?  Copy is a function, the unit done without even being connected to something else than to power.  If she can't copy it, the printer is dead.

  • Canon Pixma MG3100cant use to print wireless

    I installed it,., he used a lot before... now it won't print or scan from my laptop... but now I have a new network and lost Disc... but it works very well for my husband on his desk, he will not be printed repeat me printing error... can u please advice?

    CCFC salvation!

    Welcome to the Canon Forums and thank you for your inquiry! Thank you for your participation, but we need to let you know that your product appears to be a model that is not supported by our team here at Canon USA. Canon Forum is organized and hosted on the territory of the United States by Canon USA. We are only able to provide support for the products of Canon produced for and used in the U.S. market. If you live outside the United States, please click here and select your country or region for your support needs. Feel free to discuss products Canon sold outside the United States, but please be aware that you won't receive support directly from Canon USA.

  • Printer (Canon Pixma MP480) do not print

    My Canon Pixma MP480 won't print on my computer, but print on other computers that do not have Vista. I installed the driver several times more directly from the cd that came with it and directly from canon website. I am registered under an account to administer. It is directly connected via a USB port. The strange thing is, it's an all-in-one printer, scanner, copier, and it allows me to scan images on my computer. When I try to print a document, it times out. No error message appears on the printer LCD. It works on my friends computer that uses windows XP... My operating system is Vista 64 x.  If anyone has any advice I would be recognizing an email to

    Hi davemsee,

    Have you try to download the latest driver for your printer from Canon?
    Make sure that it is the Vista x 64 bit driver when you download and install.  Remove the old driver completely and restart the computer before the upgrade to the new driver.

    Post back with the resulf so we can provide you with more support, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I try to install my Canon imageclass d320 Painter on my new computer windows 8. It will not be printed

    It seems that the printer is configured in the system ok, but it will not be printed.  Documents in the queue in the print spooler, but won't print.

    Hi Eric,.

    It seems that you need help to solve the problem of the printer's performance. Please respond to the suite, which will help us to help you in the right direction.

    1. What's wired or wireless printer?
    2. Do you have an error message?

    You can check the link followiing, steps, designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Solve printer problems.

    You can download the latest driver from the following link.

    Canon imageclass d320.

    http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware

    Hope this helps

  • I bought a new Canon MF3200 printer and it won't allow me to find the right driver

    I have a new 64-bit computer and the printer is 32-bit. Is how important it?

    You need printer Compatible Vista 64 bit drivers for your printer to work with a Vista 64 bit operating system.

    http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

    See if all of the Vista 64-bit drivers are available in the downloads section of the Canon Web site above.
    If they are available, download/install them and your printer by following the instructions of Canon.

    If no 64-bit driver is available, you will have a change in your printer.

    See you soon. Mick Murphy - Microsoft partner

  • Canon Imageclass D320 All - in - One Printer not install under Windows 7

    My new laptop Windows 7 cannot install a driver for the Canon ImageClass D320 printer. The utility plug & play in Windows 7 has failed to find a driver for the D320. I have the installation disc that came w / the D320, but it is also a failure install a driver. (This installation disk includes drivers for only Windows 2000, Windows XP, Windows 9 X, and Windows Millennium Edition.) The Canon support site @ http://www.usa.canon.com/cusa/support/office/imageclass copiers/imageclass d320/imageclass d320? selectedName = DriversAndSoftware offers drivers the D320, but only for these same 4 OS (that is, only for Windows 2000, Windows XP, Windows 9 X, and Windows Me). Maybe the D320 needs a 64-bit driver?

    Any information would be appreciated.

    I certainly do not see 64-bit Windows 7 drivers for the D320 to http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware , and more operating systems you have listed they also show Vista and Vista 64-bit and Windows 7, Windows 7 64 bit.

    I use Firefox as my Internet browser.  However if I use exactly the same link using Internet Explorer 9, I see no Windows 7 driver.  If I use Internet Explorer 9 and change it to compatibility view, I can see all the drivers.  (To do this in IE 9 just click on the little icon that looks like a page torn paper in have - in the address bar to the left of the Refresh - button or go to the Tools Menu and select compatibility view)

    This is the second time I've seen this problem with the site driver of Canon (where I saw a thing and the person I tried to help him was to see something else on the same link).

    Here is a picture of what I see on the website of Canon, with the drop-down list to choose the operating system by selecting the driver 64 bit Windows 7:

  • How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    Have you looked at the site of Canon?

  • Printer Epson C88 + won't print after new color cartridges replaced

    Printer Epson C88 + won't print after that new color ink cartridges have been replaced.

    Hello

    ·        What happens when you try to print from the Epson printer? You get the error message? If Yes, what is the exact error message?

    ·        Your printer is able to print a test page?

    ·        What you are trying to print? You use third-party applications to print? If so, what application are you using to print?

    Method 1:

    I suggest you run the fix it is present in the article below.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

     

    To further support I suggest you to check the article mentioned below.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    To get help, I suggest you to contact Epson. Click on the link below.

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=contact&OID=69123&prodoid=63059194

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

    How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

    All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

    Canon: http://www.usa.canon.com/cusa/consumer

    Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

    J W Stuart: http://www.pagestart.com

  • 64-bit driver for Canon imageCLASS D860 all-in-One Printer

    someone at - he found a driver 64 bit Windows 7 that works for Canon imageCLASS D860 all-in - One Printer?

    someone at - he found a driver 64 bit Windows 7 that works for Canon imageCLASS D860 all-in - One Printer?

    Canon does not support that particular product under Windows 7 x 64.

    They argue as well, "Canon imageCLASS D860: this product is compatible with Windows 7 32-bit." There are no drivers for Windows 7 64-bit. "and"No 64 bit drivers are currently available for this product SOHO.

    Unfortunately - Canon has decided that this particular product is a legacy.

  • Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

    Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

    Tried the Canon support? That would be my first port of call...

Maybe you are looking for