My new ThinkPad Yoga comes with 3 energy saving modes. Who gives the best battery life?

Similar Questions

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Switch ThinkPad Yoga Clickpad with new TrackPad

  Hello world

  The new ThinkPad Yoga 12 seems to have the same dimensions as the original ThinkPad Yoga. Does anyone know if it is possible to install the new TrackPad with the buttons of the 12 tons per YEAR in the old model? Or are there hardware/driver problems?
  I'm sure that many have the same question for their machines, for example the T440, what about those?

  Thank you!

  
  

• New Hp laptop comes with 4 primary partitions. How do I creat more than I can duel boot

  New Hp laptop comes with 4 primary partitions. They are system, OS (C drive), recovery and HP tools > how do I create a new partition so that I can duel boot withour causing the entire disk pass the dynamic that would get me no where?

  If you change something, it may invalidate your warranty. If you need to return your laptop to HP, they will just wipe the drive and start over, no questions asked.

  You must remove the HP tools or the recovery partition. I think that removing the partition on an HP tools automatically goes to sleep you out of the recovery partition.

  If you delete the recovery partition, you must make sure that you have done the set HP recovery disk and it is on quality discs and safely set aside.

  If you are planning on dual booting with different versions of Windows, make sure that Windows utility block each other. For example, don't let Windows defrag loose on the other OS partition.

• hard drive died. Unable to duplicate. tried to reinstall disk comes with computer and says unable to complete the installation.

  replaced the hard drive.  Reinstall disk and custom factory

  Toshiba satellite a135. hard drive died. Unable to duplicate. tried to reinstall disk comes with computer and says unable to complete the installation. reinstall again. 5 times and still the same.

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Apple Watch series 2 comes with the same battery life?

  ddoes Apple Watch series 2 come with the same autonomy and 18 hours without sleep tracker device?

  Hello

  Yes - Apple Watch series 2 offers up to 18 hours of battery life.

  Follow-up sleep was not announced as a new built-in feature.

• Why in the world a laptop would not come with a dvd player? This is the most stupid thing ever

  I do not buy laptops often, it's only my second laptop computer purchase after having spent five years with an HP laptop. Was not the greatest, but it helped me to get through school and work. Now, I buy an acer because I heard a lot of people it's a great brand, but I'm quickly doubt that. Why? It is not a cd/dvd drive. Why in the world a laptop never would come without one? I'll come back this and am greatly disappointed with this brand. I did not and will not encourage anyone to buy an acer laptop.

  [edited to conform to the guidelines]

  Hello Paul,

  Here the parts you will need for Aspire E5-511:

  42.ML9N2.001	ODD BEZEL
  33.ML9N2.003	SUPPORT OF THE STRANGE
  KO.00807.016	DVD/R/RW. SMULTI.9MM.TRAY.8X (PANASONIC)
  KO.0080D.014	DVD/R/RW. SMULTI.9MM.TRAY.8X (HLDS)

  You can request a quote and order from your Acer store by using the customer service form.

  In the form:

  1. you select in "" Please select a topic: other".

  2. in "describe the problem:", you enter the mobile phone number.

  3 - example:

  "A price quote for the following spare parts:

  -Description P/N,

  -Etc. "

  You will receive a quote by email (pdf document). You can also call them.

• JDeveloper comes with 12 c BPM does not display the MDS configuration during application deployment window

  Hello!

  We have developed the ADF application using MDS. We mainly use it to set the configuration of BC ADF (am pool properties) when running in EM.

  When we deploy our application usually JDeveloper 12.1.3 to standalone WLS JDeveveloper shows "Oracle Deployment Configuration" window, where we can specify properties MDS: repository name and the name of the Partition.

  

  If we deploy the same application to JDeveloper 12.1.3 shipped by BPM to the same autonomous WLS, Jdeveloper shows this window.

  Deploy goes without any additional question, but we can not access MDS for our application!

  EM, we cannot change configuration ADF BC during execution. Other features that require MDS, also does not work.

  In EM-> ApplicationDeployments-> our application-> MDS Configuration EM displays the following message: the SDM configuration information is not found. This application doesn't use MDS repository or repository MDS may not have been configured properly.

  

  So my question is: how to set MDS configuration in JDeveloper comes with BPM?

  Thank you

  Boris

  OK, I compared the EAR generated file in Jdeveloper ordinary with file EAR generated by JDeveloper comes with BPM.

  I found the difference in the ADF - config.xml.

  EAR usually has the following line:

  ===

  http://xmlns.Oracle.com/ADF/MDS/config "" >http://xmlns.oracle.com/mds/config "version ="11.1.1.000"> "

  ===

  JDeveloper comes with BPM EAR didn't.

  I added this line to adf - config.xml in my source project. Now BPM Jdeveloper show "Deployment of Oracle Configuration" window during the deployment process.

  And I am able to change the configuration of BC ADF in MS when running.

  Boris

• My yoga think its Tablet constantly in mode and, therefore, the keyboard is locked!

  My new lenovo yoga 2 13.3 "cannot generally recognize that the sound mode but in it all comes just with a notification telling me his"tablet mode"that turns off the keyboard and now I cannot use it and it won't return to 'portable' mode so that I can use it again, as I twist it. What should I do?

  If the switch is broken, you may contact Lenovo for repair.

• b2375dfw energy saving mode

  So if my new b2375dfw is in power saving mode, how I wake it up if I want to analyze with it (I know it will always print from my computer automatically). I want to say in power saving mode is that all lights, indicators, and the screen are disabled, but energy saving button is flashing at me.

  I tried:

  -By typing all the buttons

  -Double tapping, tapping and long press on the standby power button

  -Tapping, dragging, double and triple by tapping on the screen.

  -The search for the manual "to service".

  Other clues?

  If anyone is looking for the answer, I found it. It doesn't seem to be in the user's manual, but you must go to:

  Save my settings ==> the configuration of the Machine ==> initial configuration ==> power ==> case of alarm

  and set it to on. There is a chance that he was initially set to on and I turned it off when I was trying to figure out something else. However, it happened, it was not well documented.

• PHOTOSMART 7520 GOING 'OFF LINE' IN ENERGY SAVING MODE

  My Photosmart 7520 is connected wireless to my HP Envy laptop m6 running Windows 8.  When turned on, it works.  I can send print jobs to the printer from my laptop and print.  But after the printer has been in this is the mode to save energy for a few minutes, the printer goes offline and I can't get this back online on the computer.  The error message on the computer, it's that the computer cannot communicate with the printer.  The only way to get it printed again is that I do, at the printer, release the mode 'sleep' and then turn it off and then new.  (Automatic shutdown is DISABLED as long as the printer on a wireless network).

  I had, during the last months of 2 1/2 a number of HP technicians has check the settings of the printer, the parameters of my laptop and HP even replaced the printer for me.  But I still have the problem.  Is that how the printer is supposed to work, is it a default in printers and is there a solution?

  OK, that's weird, it's a decent router.  Is its firmware updates?

  Have you set the static IP address in the printer or router?

• Hi Folk, I need to buy new 2-3 computers for my new office for architecture. Please enlighten me what would be the best long-term investment, while I can't invest as much. Thank you very much and enjoy the coming days of Advent. Kindly, Siamak

  Hello Folk,

  I need to buy new 2-3 computers for my new Office of architecture.

  Please enlighten me what would be the best long-term investment, so that I can not spend as much.

  Thank you very much and enjoy the coming days of Advent.

  Nicely,

  Siamak

  You need to investigate "in person"... Go to the Apple Store (or a "Apple Shop" located in a section of another bank) > click here > https://locate.apple.com/ch/fr/sales/?pt=4&lat=47.3692907&lon=8.5418192 for locations at or near Zurich

• Energy saving mode

  Energy jet 8500 Office of economy mode won't work, even if selected. Ads won't be turned off.  I believe that this has happened after an upgrade.

  BigglesAK,

  This is a great news! Please consider marking my recommendation (#4 Message of this thread) as the accepted Solution, then the other members of the community who have the same problem can easily find a solution.

  Thanks again,

• Why my windows xp stops leaving a message in energy saving mode

  If I run a virus scan or malware check the computer stops and it says power saving mode.   How can I fix it?

  Hello

  · What is the number and the model of the computer?

  · What is the exact error message or the error code that you receive?

  · On the computer which anti-virus are you running?

  · Who is the service pack installed?

  Your question does contain all the required information necessary for us to help you. Come back with more specific details to help you better.

• SP2309W won't go into energy saving mode when connected via HDMI

  Hello

  I just got 2 SP2309W, and I love them, the only problem I encounter is just one of them (the one connected via HDMI) is not in power saving mode, even when I turn off my laptop. Is anyone else having the same problem?

  I have connected the monitor via VGA and DVI and the energy saver works fine but it does not work with HDMI

  I have a XPS 1530, Intel Core 2 Duo processor T9300with a 256 MB NVIDIA GeForce 8600 M GT video card.

  My XPS has a HDMI and VGA input so I have a monitor connected via VGA and the other via HDMI and even when I go around, always one connected via HDMI is not in the standby power mode even if the laptop is turned off (or when he goes to sleep).

  Thanks for your help,

  Ivan

  We left three SP2309Ws on all night to disconnect the HDMI cable and in STFC mode and came this morning to see the message from MONIQUE always there. They all didn't say, 'no HDMI cable. This is normal. In fact, we have tested on several other models of monitors and they all do the same thing.