My new usb stick askes for interchangeable support

Similar Questions

• USB stick wordt geinstalleerd maar support computer vraagt om verwisselbaar

  IK heb een nieuwe USB stick tariff, na insteken usb poort wordt het stuurprogramma geinstalleerd, het expensive works OK, maar bij aanklikken een verwisselbaar om computer question average aan you Pickwick op stick.

  Says you verhelpen?

  m gr vr

  PEter

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Kies uw taal vervolgkeuzelijst onderkant van aan ITU of pagina om your question you posten in Taal van uw keuze. Post on the forum without jij het is voor Frans. ALS I niet vinden baking taal, support van jullie voor boven additional international Geraardsbergen kan

  Als u regarded dat deze vertaling has geholpen why u right place you plaatsen aankruisen said bericht als een antwoord alone when I andere landgenoten zoeken ze het Hotel vinden. dank

  http://support.Microsoft.com/common/international.aspx

• HP require a new 32 G USB stick "" not labeled as compatible with Win 8."

  OS Win Pro 8.1

  Product: HP500-125

  Question: HP Recovery set using the USB.

  Problem: HP require a new USB stick 32 G ""not labeled as compatible with Win 8. "I don't have to buy such a stick in my place (Brisbane, Australia).

  Can you help me?

  CherylG.

  I have for the usb drive that you suggested, and it happened today however it does not resolve the difficulty, even if the product is satisfactory. Consults with the HP support has finally confirmed that the provided HP recovery media software does not work with Win 8.1Pro with media library.

  So, in a way, the problem is solved by default... I used successfully in place of Windows Recovery Media Creator.

• Code 31, for my 2 GB USB - stick USB Device Manager,

  Hello world

  I use a HP pavilion a610t, 32, Vista premium edition, 2. 4 g, 3 G of ram, w, 4USB ports. I installed a gang self-powered USB 2.0 w/10 usbs, sometimes it turns on at startup, sometimes not and I re - plug for my system to recognize. I don't see the error messages for the band, but I got an error for 2G USB - stick in the Device Manager: code 31, tried to reinstall a driver or driver update, but it says driver is up to date. the appliance works once it is on. Is that what the problem of the USB - stick or tape USB? Also, at startup I get all my other USB devices including media Pocket Bay K: entry w/PC OEM pop ups asking what I want to do and if I want to scan or to execute without scan, I tried scanning to see and it did nothing, I didn't not lose my media in the device either. I also code 10 for my reader to CD-DVD E: that ejects and turns but does not load the driver so I don't see anything, I tried all the suggestions, reload driver, Plug connections, high-low own filters, re - install the driver, all to nothing does not. Device Manager still shows my drive with a flag and error 10 (driver may not load) are 2 separate issues but I have listed both, because they may be related, I want to understand the thumbdrive, firstly because it is a new problem, and I use my allot USB drives to save all my important files. The problem with the drive, I tried all the suggestions so far, if someone has any ideas to help I would be very grateful
  Thank you all, boulonman/Alan

  Hello

  It doesn't seem to be a model available in HP you specified.
  See the site:
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=HP+Pavilion+a610t#n41
  I suggest you to check the model number again.
  The CD/DVD software burning should be uninstalled to uninstall or change a program and not Device Manager.

• When you use USB foot control for transcription intermittently continues to play even when released. Tried the new foot controller.

  Recently, I upgraded my wife to a new pc with Windows 7 Home Premium on it.  The package of trancription she uses is WinScribe.  For knowledge, we kept his old Office XP with Word 2002.  After the IT person to society that it contracts for all their software set up and install a spell checker medical all seems to work well.  Well now, we just have a question.  She uses and uses an Infinity IN-USB-2 foot controller.  The question is when it plays its reports, intermittently when it leaves upward on the pedal to play that the report continues to play.  We have installed a new pedal, always with the same problem.  These controllers do not come with a dedicated driver, but are recognized by Windows.  Don't know if it's a problem of Windows 7 or not, but before, it was to use Windows XP with the same transcription software, the same product office and same foot controller without problem.  As a side note, my reason to replace his old computer was XP got to where she acted as if she had alzhiemers.  Has raced in many analyses of virus and malware scans with various products.  No permit.  Has happened to another pc, I have too.  Anyone who deals with this?

  Hello Larry,.

  Thanks for posting of query in Microsoft Community.

   
  I suggest you to contact Infinity IN-USB-2 feet and check with them.
  http://www.Data-supplies.com/infinity-in-USB-2-foot-pedal/
  Support by email
  http://www.dictationsupport.co.uk/email-support/
   
  Hope the helps of information.
   
  Thank you

• No driver found for the new USB drives don't. No problem with the devices previously used.

  Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

  The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

  I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

  Windows 7 32 bit.

  Kind regards

  Check if you have limited the available somehow drives... possibly VMWare has reserved
  the drive letters. Best is to check with the VMWare Support and forums.

  Look in Windows disk management and see if something is there.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• It lacks a computer on my new USB mass storage device.

  When I plug my two sticks of SanDisk U3 into my computer, my brand new computer does not recognize them. I passed to the Device Manager and looked under controller universal serial bus, while it is in my USB and the mass storage deivce is not displayed. I have windows vista on this computer and my laptop. These work on my laptop very well, but not on this computer. I bought the full version of Windows Vista and have the disk. I have this installed on 1 computer.

  Hello

  Check with SanDisk support because they have excellent online support, including live Chat and documentation.

  SanDisk - Support
  http://KB.SanDisk.com/app/home

  See also the appropriate bodies of SanDisk:

  SanDisk - Forums
  http://forums.SanDisk.com/

  http://www.SanDisk.com/SanDisk-support/forums

  ===================================

  Added troubleshooting:

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why Windows 8 will be a picture of a USB stick 32 GB system?

  I'm doing the image of the system recommended for my new machine, Windows 8. Bought a USB stick 32GB to do it on.

  Got told that it has not been formatted right so I re-formatted it.
  And then said "the drive is not a valid backup location.
  Anyone has an idea why not? How to get around
  Vehicle of Michael

  Hi Michael,

  Thank you for choosing Windows 8 and join us on our community.

  According to the description, it seems that you get an error message "the disk is not a valid backup location" when trying to create a System Image on USB stick 32GB. I will definitely help you with this problem.

  I suggest you to follow the steps from the link and check if the problem persists.

  How to create a system image to refresh your PC in Windows 8

  http://support.Microsoft.com/kb/2748351

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Toshiba Regza 46VL743G - playing files via USB stick

  Hello

  I have problems with playback music and videos via USB. I tried to format my USB for different file systems (ntfs, fat, ms - dos, for example) and video formats, but the screen is black, I launch the media player.

  My TV has played with MS-DOS Format the photos, but no mp3 or divx/avi files. I run the multimedia player with 'video' the led of the USB stick flashes, but after a few seconds the led turn off (I think that the stick loses power).
  My other TV (LG 55LE7510 55 '') plays all video files and mp3 without any problem (ntfs and video format *.avi)

  Someone has an idea?

  Hey,.

  Have you tried another USB key and the same thing happens with another USB key? Usually, you use the FAT32 format for your USB key. Then the TV will be able to recognize it and all the files it contains.

  According to the specifications of your TV supports jpeg files (USB and SD card), MP3 (USB) and video DivX SD (USB).

• Satellite L500-(128) & start a Linux Live USB Stick

  Hello

  Can someone tell me if it is possible to boot from a USB stick (for example with Xubuntu 9.10 on it) on a new Satellite L500 (-128)?

  She has the necessary options USB - HDD it in the BIOS for this?

  The owners of any Satellite L500 there able to give accurate information? would be appreciated. I could do with the knowledge before you buy one.

  Thank you very much.

  Yes, the L500 can boot from USB Flash Drives. I believe that all 2008-2009 Toshiba laptops can boot from USB :)

• Sony UWA-BR100 Wireless USB stick.

  Hello. I bought a Bravia a year ago, which was ready wifi. I also bought a USB stick for wireless Internet. After a year Flash DRIVE suddenly stopped working. It was quarrantee anger so I had to pay for a new. I searched many shops plus some Internet stores, but nowhere in Greece sells! Not even Sony Hellas! IS THIS POSSIBLE? AFTER ONLY 1 YEAR AND I CAN NOT FIND ACCESSORY? 1 year average tv's NEW!

  Hi, you can also contact sony ELECTRONICS HERMAN dealer to check availability and option for international shipping. Their address is

  www.hermanelectronics.com/HermanStore/Contact.asp

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Mijn usb stick works red niet meer.

  IK heb nog aan some documenten op mijn usb stck critique vanmiddag. En later wilde ik moet of USB bloodstains, maar toen is er geen window automatically listen to en hij could ook niet in deze computer.

  IK kan wel in apparaatbeheer zien dat er een usb stick in of zit computer, perfect en opnieuw installeren maar was niet. Heb ik een keer geprobeerd some said.

  Kan iemand mij wat ik nog meer kan doen om invited hem you blush. Hij doet het ook op andere pushing laptop niet. ER wordt wel een stuurprogramma geinstalleerd.

  Alvast bedankt voor eventual advice.

  MVG,

  Beg

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  B Eddie

• 1 t verbatim USB stick not recognized by the system and will not work

  I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

  Hello

  Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows