My office fried in a power surge - I bought a new one – I can't register my CS2, even if I have the activation code

Similar Questions

• I just be reformatted my computer, but because of me being overseas and having my back installation disc in my country, I'm not able to activate my office even when I have my activation code

  I just be reformatted my computer, but because of me being overseas and having my back installation disc in my country, I'm not able to activate my office even when I have my activation code. my version of office in my country is a student and the original version. I only go back to my country after a few months of mmore and I need to activate my office to make a project work. is it possible to activate my office that you are using the disk?

  Try the phone activation:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• HP 2000-2c29WM Notebook PC how do I know if I have an activation code for Microsoft Office?

  I don't have the box I bought my laptop and more. How will I know what my activation code for Microsoft Office and if I bought it with my laptop? I bought the product in the United States and I am now in South Africa. I have the icon on my Start menu.

  Hello

  You probably have a TRIAL version on your computer and you must pay to get the code. Suppliers does not display a activation code of Microsoft Office on any box.

  Kind regards.

• I need to re - install and reactivate my Office CS6.  I can't because I don't have the key code for the previous version of CS4.

  Had a boot disk failure.  New hard drive.  Re-install programs.  Reinstalled CS6, but cannot activate because I do not have a code for the previous version.  I have the key code for CS6.  It is listed in my Adobe account.  How can I turn it back on this program?

  Find the serial number of your Adobe product quickly

• Hello, I have the error code 16, I can't open any office of creative cloud; just Muse and bridge)... I've done everything was in the Adobe site... Anyone Can helpe me please?

  I did what was online... .but nothing change...

  I have change password

  I re install Photoshop more than 3 times... .exclude records and host etc...

  And I can not open normal normal Photoshop after the Adobe update

  Can someone help me, please?

  If you run a creative application Cloud (CC) or Creative Suite (CS) and get an error of configuration 15 or 16 that invites you to uninstall or reinstall the product, then it is likely that your application files permissions are set incorrectly. Please see this link for solutions:

  Configuration error. CC, CS

  Guinot

• power surge on hub port... tried every thing but it want reset!

  power surge on hub port... tried everything, but it will not be reset!

  Ethernet or USB hub hub?
  Either way, it seems that it is fried. (Surge can do).
  You can buy a new hub.

  HTH,
  JW

• PC in a cycle of restarting after power surge

  Win XP SP 2
  NVIDIA 8800 GTS
  2 gig Ram
  P5N32 SLI
  Hi guys,.
  I hope someone can throw me a BONE here, because I don't know which way to go with this.
  Basically, power surge last night, my PC will now in a cycle of infinite when turned on reboot.
  I can't start in safe mode, as it hangs on the list of files. Cannot start last well-known, cannot start from the CD, at the risk of going as far as "Checking hardware" and restart.
  So, essentially I can't anything. I guess it's obvious that some hardware is fried, but I can't afford to replace things to chance - any suggestions on probable causes, or ways I can limit?
  Thank you
  KeV

  Hi KevTM,

  Method 1:

  I suggest to disable automatic system error reboot and check the error message.

  Prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  To do this, follow the steps below.

  To start Windows in safe mode, follow these steps:

  a. click on the electric start button
  b. to enter the Windows xp advanced startup option.
  c. when the computer starts up press and hold your "F8 key" who should bring up the "Menu Options advances of Windows". "»
  d. use your arrow to switch to "disable automatic system failure reboot" and press your enter key.

  Here, you will need to check the error message or you receive an error code.
  
  Method 2:

  Try to disconnect all the external devices connected to the computer except the mouse and keyboard and try to start the computer and check.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• USB power surge

  I got an error message indicating the USB power surge/failure.

  Since then, all 3 USB on my laptop is no longer works. If I plug an optical mouse into it the optical light doesn't even come on making me think it's a question of power.

  In Device Manager, all the usbs show also operational (although when you select one and go to the power tab, it shows 0 under the power available.

  I'm worried I have fried my motherboard, but everything else works fine.

  any suggestions?

  
  

  Hello

  What you can do is to reset the usb hub. This will probably fix your problem and if it doesn't it is will also be useful in pointing to USB are damaged by the surge.

  First try these steps to reset zero USB hub and let us know the result. Here are the steps:

  USB controllers require that an IRQ be assigned. The IRQ line is assigned in the computer's BIOS, and usually IRQ 9 is assigned.

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, click Run, type sysdm.cpl in the Open box, and then click OK.
  1. Click the Hardware tab.
  1. Click the Device Manager button.
  1. Expand Bus USB controllers.
  1. Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  2. Restart the computer and reinstall the USB controllers.
  1. Plug in the removable USB storage device and test to make sure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/310575

  Hope this helps,

  Steve <> Microsoft Partner

• Satellite P775-program of power surge on USB error message

  My P775 program is a month old.
  In the last two days, randomly when I plug in my iPhone I get the message "Power Surge on USB... ».
  If plugged into USB 3.0 Port, iTunes does not load, nothing happens.

  If plugged into the other Ports USB 2.0 on the right side, same as above, PLUS, my wireless mouse that is connected to another USB 2.0 Port on the same side has been rendered as well. Until the reboot.

  There seems to be no logic, that sometimes I have no problem, but rarely.
  Does anyone have a solution for this?

  I tried to uninstall all the USB USB and re start (so re - install), but I do not uninstall the software via the checkbox.

  Your help would be greatly appreciated.

  Try to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:
  Go to the Device Manager
  Expand Bus USB controllers.
  Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  Restart the computer and reinstall the USB controllers.

  Also check the Microsoft KB817900
  http://support.Microsoft.com/kb/817900

• Satellite A30-414: power surge on hub port error

  Hi all

  I have a Satellite A30-414 under XP Pro SP2. I had 2 USB ports: I plugged a siemens santis ADSL modem one and a sitecom USB hub 4 in the other. For months things have worked very well, but in the last few weeks I've been more frequently make this mistake of "power surge on hub port", which sometimes turns into a "a bad usb device worked" or "unknown usb device"...

  At first, I thought it was the modem. Then I thought it was the hub. Then I saw that I was getting the same error when everything I had plugged in was this basic usb mouse. At that time I KNEW: this is yet another annoying bugs kindly provided by XP SP2.

  All microsoft support had to suggest is to "use an AC adapter to power the USB device"... (Gee, why didn't think of this?) Too bad that my sitecom hub is designed to draw power from the USB port only).

  Of course, one will mark the task bar so that the error is always hidden, but that does not eliminate the problem itself now, it?

  Bottom line is... I'm tired of plugging and unplugging USB devices over and over again trying to make them work. Can someone pls drop some wisdom? I heard that people from the other producer for laptop has had a patch for this error...

  Thanks in advance!

  [Edited by: admin December 15 05 21:01]

  Hello

  If you want to avoid this error message you can do on this way:

  -Click START
  -Click on control PANEL
  -Double-click on the SYSTEM icon
  -Click on the HARDWARE tab
  -Click the button MANAGER of DEVICES
  -Click on the + sign next to USB Bus controllers to expand the selection.
  -Right click and select PROPERTIES on the Intel® USB UNIVERSAL HOST CONTROLLER (not the USB root hub)
  -Click on the ADVANCED tab
  -Check the box that says: don't tell me about USB errors

  Of course, the USB device has exceeded the limits of its hub port power. USB devices may draw a maximum of 500 milliamps (mA) per connection. With the release of SP2, if a device tries to use more than that, a USB port balloon message appears to indicate this on the current condition. During the docking of the Tablet, a very brief on the current condition is sometimes detected by the operating system, and the warning message is displayed. As much as I know this message has no effect on the functionality of the USB port.

  Good bye

• Satellite A100-998: continue Error Message «Power surge on USB hub»

  Hello world.

  I am the new owner of a Satellite A100 laptop that has a little problem.

  When the laptop goes into mode and the monitor shutsdown, energy saving when I turn on the computer again, I always get an error message will appear in the system tray. The message says: peripheral USB A "Power surge on Hub Port" exceeded the limits of its hub port power. To solve the problem, click this message.

  First of all, I have 4 USB ports, but NONE of them are used. There's nothing attached to the laptop at all.
  Secondly, when I click on the box, I get 5 unknown USB devices shown with the yellow question mark next to them in the list and 3 unused ports, which seem to be ok, with no yellow question mark.

  Why is happening, with no device attached, or even installed on the laptop.

  Your help to solve this problem will be more appreciated.

  Rgds
  Neil.

  Hello, Neil

  What model of laptop you have exactly (A100-xxx)?

• Power surge and now the XBox will not turn on

  We had a power surge, we blew a fuse, everything came back but the xbox. the remote flashes just all around, and the xbox does not turn on?

  Hi Debbie

  To be honest, a power surge can vary from all electronics just stopped, or completely destroyed.

  I recommend that ask you this question on the official forums of the XBox. The experts there will be more knowledge on how to diagnose the extent of the damage.

  Here are links to these forums.

  XBox Forums Home: http://forums.xbox.com/?xr=shellnav

  Xbox.com: Solve common problems: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Concerning

• computer does not start after power surge get to message x 300 128 MB BIOS

  I had a power surge of the House with the computer when I restarted I got a black screen with a 300 x is 128 MB bios p/n 113-a33406-100

  under that top left, a blinking cursor try don't reboot with pf8 no help

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the last splash screen that is displayed, until you get the error message?

  ·         Were there recent changes made on the computer before the show?

  Please give us more information on this. Also, disconnect any external devices (printers, USB Hub, drives external, etc.) and try to start.

  Error-PC x 300 and 128 MB BIOS p/n 113-A33406-100 is linked to the Dell computer. If so, I suggest you to contact the Support Dell about this issue and check. You may experience this problem if the BIOS is damaged.

• After a small power surge (I installed a surge protector) my printer and his new cartridge dating back to one week only prints blank pages when I click on 'print '.

  After a small power surge (I installed a surge protector) my printer and its new cartridge dating a week began blabk pages to print

  Contact the technical support for the manfucaturer of the printer.

• I had a power surge and I couldn't use the computer. Blue screen error: RQL_NOT_LESS_OR_EQUAL

  Original title: RQL_NOT_LESS_OR_EQUAL blue screen

  Windows Vista Home Pemium

  System
  Hewlett-Packyard
  Model:-s3580a
  RAM memory (RAM) 2.00 GB
  Type of system: - 32 bit - OS

  I get a blue screen with this message. Sometimes it's memory something...

  Win32k.sys - address 972FC9CF base at 9726000, DateStamp 4f79ab49 STOP: 0x0000008E (0 x 0000005, 0x972FC9cCF, 0xA72AACAB, 0x00000000

  I had a power surge and I couldn't use the computer. When she did finally after 4 months, he would sometimes load. Now in the past 2 months, the computer has been great. A bit slow sometimes. Now, I get this message. How can I fix?

  Neva mind, I got the number fixed... with a new hard drive... lol.  My other drive hard :*(broken